EPCOS C0G X7R User Manual

Multilayer Ceramic Capacitors
C0G and X7R
Ordering code system
Array
B37830 R 0 101 K 0 2
2 2-fold array 4 4-fold array
Internal coding: 0 or decimal place for cap. values < 10 pF
Capacitance tolerance
^
^
K ± 10 % (standard for C0G)
^
M ± 20 % (standard for X7R)
Capacitance, coded
(example)
Rated voltage
Rated voltage [VDC]
^
100 10 · 100 pF = 10 pF
^
10 · 10
101
^
22 · 10
220
Code
1
Packaging
^
1 cardboard tape, 180-mm reel
^
3 cardboard tape, 330-mm reel
^ ^
1
pF = 100 pF
0
pF = 22 pF
16 25 50
905
Termination
Type and size
Chip size (inch / mm)
0405 / 1012 0508 / 1220 0612 / 1632
Standard:
Temperature characteristic C0G X7R
B37830 B37831 B37940 B37941 B37871 B37872
^
R nickel barrier for all case sizes “R“ also indicates array capacitor
92 10/02
Multilayer Ceramic Capacitors
X7R
Features
Reduction of mounting time and mounting costs
Space saving on the PCB
Applications
Suitable for electronic circuits with parallel line layout
Decoupling
Coupling
Blocking
Interference suppression
Termination
For soldering: Nickel-barrier terminations (Ni)
Options
Alternative capacitance tolerances available on request
Delivery mode
Cardboard tape, 180-mm and 330-mm reel available
Electrical data
Temperature characteristic X7R Climatic category (IEC 60068-1) 55/125/56 Standard EIA Dielectric Class 2 Rated voltage
1)
Test voltage V Capacitance range C Max. relative capacitance change Dissipation factor (limit value) tan
Insulation resistance
2)
at + 25 °C R
Insulation resistance2) at +125 °C R
VR 16, 25, 50 VDC
2,5 · VR/5 s VDC
test
1 nF … 22 nF
R
DC/C ± 15 %
d < 25 · 10
< 35 · 10
> 10
ins
> 10
ins
–3
–3
for 16V
5
4
Time constant2) at + 25 °C t > 1000 s Time constant Operating temperature range T Ageing
2)
at +125 °C t > 100 s
–55 +125 °C
3)
op
yes
Array
MW MW
1) Note: No operation on AC line.
2) For C
3) Refer to chapter “General Technical Information”, page 197.
> 10 nF the time constant t = C · R
R
is given.
ins
101 10/02
Multilayer Ceramic Capacitors
X7R
Capacitance tolerances
Code letter K M
(standard)
To le r a nc e
±10% ±20%
Dimensional drawing
2-fold array (case size 0405) 4-fold array (case sizes 0508 and 0612)
X7R
u
b
s
s
kk
KKE0272-V
k
e
b
KKE0330-R
u
s
e
k
e
KKE0331-Z
Dimensions (mm)
2-fold array 4-fold array
Case size (inch)
(mm)
l 1,37
b 1,0 +0 / – 0,15 1,25
s 0,70 max. 0,85
k 0,36
e 0,64 0,5
u 0,2
Tolerances to CECC 32101-801
0405
1012
0508
1220
0612
1632
± 0,15 2,0 ± 0,2 3,2 ± 0,2
± 0,15 1,6 ± 0,2
± 0,1 0,85 ± 0,1
± 0,1 0,3 ± 0,1 0,4 ± 0,15
± 0,1 0,8 ± 0,15
± 0,1 0,2 +0,3/–0,1 0,2 +0,3/– 0,1
b
102 10/02
Multilayer Ceramic Capacitors
X7R
Recommended solder pad
2-fold array (case size 0405) 4-fold array (case sizes 0508 and 0612)
X7R
P
D
AB
C
KKE0302-L
C
P
D
AB
KKE0309-9
Maximum dimensions (mm)
Case size (inch/mm) Type A B C D P
0405/1012 2-fold array 0,55 0,28 1,38 0,40 0,64
0508/1220 4-fold array 0,90 0,40 2,20 0,35 0,50
0612/1632 4-fold array 1,00 1,10 3,10 0,45 0,90
Termination
Termination (nickel barrier)
Ceramic body
Inner electrode
AgPd
Substrate electrode Ag Intermediate electrode Ni External electrode Sn
KKE0366-S-E
103 10/02
Multilayer Ceramic Capacitors
X7R
Product range array capacitors
X7R
Size
inch
mm
1)
2-fold arrays 4-fold arrays
0405
1012
0508
1220
0612
1632
Type B37831 B37941 B37872
C
R
VR (VDC)
16 25 50
1,0 nF
1,5 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
10 nF
15 nF
22 nF
X7R
1) l ´ b (inch) / l ´ b (mm)
104 10/02
Multilayer Ceramic Capacitors
X7R; 0405 to 0612
Ordering codes and packing for X7R, 16, 25 and 50 VDC, nickel-barrier terminations
Chip thickness Cardboard tape,
Æ 180-mm reel
^ ^
1)
C
R
Ordering code
2)
mm pcs/reel pcs/reel
* 1 * 3
Cardboard tape,
Æ 330-mm reel
Case size 0405, 16 VDC, 2-fold arrays
1,0 nF B37831R9102M02* 0,6 2,2 nF B37831R9222M02* 0,6 4,7 nF B37831R9472M02* 0,6
10, nF B37831R9103M02* 0,6
± 0,1 5000 20000 ± 0,1 5000 20000 ± 0,1 5000 20000 ± 0,1 5000 20000
Case size 0508, 25 VDC, 4-fold arrays
1,0 nF B37941R0102M04* 0,85 2,2 nF B37941R0222M04* 0,85 4,7 nF B37941R0472M04* 0,85
10, nF B37941R0103M04* 0,85
± 0,1 4000 16000 ± 0,1 4000 16000 ± 0,1 4000 16000 ± 0,1 4000 16000
Case size 0612, 50 VDC, 4-fold arrays
1,0 nF B37872R5102M04* 0,85 1,5 nF B37872R5152M04* 0,85 2,2 nF B37872R5222M04* 0,85 3,3 nF B37872R5332M04* 0,85 4,7 nF B37872R5472M04* 0,85
6,8 nF B37872R5682M04* 0,85 10, nF B37872R5103M04* 0,85 15, nF B37872R5153M04* 0,85 22, nF B37872R5223M04* 0,85
± 0,1 4000 16000 ± 0,1 4000 16000 ± 0,1 4000 16000 ± 0,1 4000 16000 ± 0,1 4000 16000 ± 0,1 4000 16000 ± 0,1 4000 16000 ± 0,1 4000 16000 ± 0,1 4000 16000
X7R
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance. For other available capacitance tolerances see page 102.
105 10/02
X7R
Typical characteristics
Capacitance change
DC/C
temperature T
20
C
%
C
25
0
_
10
_
20
_
30
_
40
_
50
_
60
_
70
_
80
_
60_40_20
0 20 40 60 80 100 ˚C 140
versus
25
KKE0186-U
T
Multilayer Ceramic Capacitors
Capacitance change DC/C0 versus superimposed DC voltage V
10
C
%
C
0
0
1 nF
_
10
_
20
_
30
_
40
0
10 20 30 40 V 50
50 V
X7R
KKE0356-K
V
Impedance |Z| versus frequency f
4
10
Z
2
1 nF
10
1
10 nF
10
0
10
_
1
10
_
2
10
10
0
10
Dissipation factor tan
d versus
temperature T
KKE0358-2
10
_
1
KKE0189-J
δtan
_
2
10
_
3
1
3
10102MHz
10
f
_
60_40_20
0 20 40 60 80 100 ˚C 140
T
106 10/02
Multilayer Ceramic Capacitors
X7R
Typical characteristics
Insulation resistance R temperature T
8
10
M
R
ins
6
10
5
10
4
10
3
10
versus
ins
KKE0190-M
Capacitance change DC/C1 versus time t
10
C
%
C
1
0
_
5
_
10
_
15
X7R
KKE0191-V
2
10
0
20 40 60 80 100 140
_
20
0 1
˚C
10
10
T
10
2
3
10h
t
107 10/02
Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne aus-
drückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elek­troindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe ent­halten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft ein­zuholen.
Published by EPCOS AG Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representa­tives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.
Loading...