1
B82498–F****–*–2–7659
Size 0805 (EIA) or 2012 (IEC)
Rated inductance ceramic 2.7nH to 820nH
Rated inductance ferrite 1000nH to 6800nH
Rated current from 90 to 1000 mA
Construction
Cubic coil with ceramic or ferrite core
Epoxy moulded flat top for vacuum pickup
Wire welded to terminations
Features
High resonance frequency
Close inductance tolerance
Suitable for reflow (IR and vapor phase)
and wave soldering
Applications
Antenna amplifiers
DECT systems
Mobile phones
Keyless entry
GPS (Global Positioning System)
Terminals
Thick–film coating of Ag/Pd/Pt
Base material AL2O3 ceramic or NiZn ferrite
Marking
No marking on component
Minimum data on reel:
Manufacturer, part number, ordering code,
L–Value and tolerance of L–value,
quantity, date of packing
Delivery mode
8–mm blister tape, wound on 178–mm reel
For details on taping, packing and packing units see databook
The information contained in this datasheet describes the
type of component and shall not be considered as guaranteed characteristics.
SMT Inductors, SIMID Series B82498F
SIMID 0805–F
Hugo ist doof BNR
7 pages
11.11.2004
2
B82498–F****–*–2–7659
General technical data
Rated inductance L
R
Measured with impedance analyzer HP 4291A and
test fixture 16197 at frequency f
L;
short dimensions
2.0 x 1.2 x 0.8 (mm); 0.9 + 0.1 (mm) pad distance;
short inductance 200 pH unconsidered
Q factor Q
min
Measured with impedance analyzer HP 4291A and
test fixture 16197 at frequency f
Q;
short dimensions
2.0 x 1.2 x 0.8 (mm); 0.9 + 0.1(mm) pad distance;
short inductance 200 pH unconsidered
Rated current I
R
Maximum permissible DC with inductance decrease-
L/L
0
10% and temperature increase of 25 K
at rated temperature of 125 °C
Self–resonance frequency f
res,min
Measured with network analyzer HP 8720D
DC resistance R
max
Measured at 20°C ambient temperature,
measuring current < I
R
Climatic category In accordance with IEC 60068–1
55/150/56 (–55 °C/ +150 °C/ 56 days damp heat test)
Solderability In accordance with IEC 60068–2–58 (lead free)
(245 3) °C, (3 0,3) s
Wetting of soldering area: 90%
Resistance to soldering heat In accordance with IEC 60068–2–20
260 °C, 10 s
∆L/L 3%
Permissible PCB bending 2 mm (100 mm long standard PCB)
Weight Approx. 8,5mg (ceramic), 12,5mg (ferrite)
The information contained in this datasheet describes the
type of component and shall not be considered as guaranteed characteristics.
SMT Inductors, SIMID Series B82498F
SIMID 0805–F
Hugo ist doof BNR
7 pages
11.11.2004
3
B82498–F****–*–2–7659
Dimensional drawing
The information contained in this datasheet describes the
type of component and shall not be considered as guaranteed characteristics.
SMT Inductors, SIMID Series B82498F
SIMID 0805–F
Hugo ist doof BNR
7 pages
11.11.2004
Loading...