Datasheet B32632, B32634 Datasheet (EPCOS)

查询B32632A1102供应商

Film Capacitors

Metallized Polypropylene Film Capacitors (MFP)

Series/Type: B32632 ... B32634

Date: August 2004

© EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained thereinwithout EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed.

Metallized polypropylene film capacitors (MFP) B32632 ... B32634

High pulse (wound)

Typical applications

Smoothing High-frequency AC loads TV (flyback)

Climatic

Max. operating temperature: 110 °C Climatic category (IEC 60068-1): 55/100/56

Construction

Dielectric: polypropylene (PP) Film metallized on one side and metal foils internally connected in series Contact layer of sprayed metal Wound capacitor technology Epoxy resin coating (UL 94 V-0)

Features

Highest possible contact reliability Very high pulse strength Self-healing properties

Terminals

Crimped wire leads, lead-free tinned, lead length (6 1 mm) or min. 20 mm Double crimped wire leads, lead-free tinned Straight wire leads, lead-free tinned, lead length (17 ±3 mm) Different lead spacings (reduced and enlarged) available, lead length (6 1 mm)

Marking

Manufacturer's logo, style and type (P6xx), rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage, date of manufacture (coded)

Delivery mode

Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, refer to chapter "Taping and packing“.

Dimensional drawings

B32632 ... B32634

High pulse (wound)

Detail of double crimped version

Dimensions in mm

Lead spacing

±0.8

Lead diameter d

Type

15.0 0.8 B32632

22.5 0.8 B32633

27.5 0.8 B32634

B32632 ... B32634

High pulse (wound)

Overview of available types

Lead spacing 15.0 mm 22.5 mm Type B32632 B32633 VR(VDC) 630 1250 1600 2000 3000 630 1250 1600 2000 2500 3000 V

(VAC) 300 450 450 500 800 300 450 450 500 750 800

rms

CR(nF)

0.47

0.68

1.0

1.5

2.2

3.3

4.7

6.8 10 15 22 33 47 68

100

Lead configurations

Series Standard Reduced Enlarged Straight Double crimped

B32632 15 mm 7.5 / 10 / 12.5 mm 17.5 mm 15 mm 15 mm B32633 22.5 mm 15 / 17.5 / 20 mm 25 mm 22.5 mm 22.5 mm B32634 27.5 mm 25 mm  27.5 mm 27.5 mm

B32632 ... B32634

High pulse (wound)

Overview of available types

Lead spacing 27.5 mm Type B32634 VR(VDC) 630 1250 1600 2000 V

(VAC) 300 450 450 500

rms

CR(nF)

10 15 22 33 47

68 100 150 220 330

Lead configurations

Series Standard Reduced Enlarged Straight Double crimped

B32632 15 mm 7.5 / 10 / 12.5 mm 17.5 mm 15 mm 15 mm B32633 22.5 mm 15 / 17.5 / 20 mm 25 mm 22.5 mm 22.5 mm B32634 27.5 mm 25 mm  27.5 mm 27.5 mm

B32632

High pulse (wound)

Ordering codes and packing units (lead spacing 15 mm)

VDC

630 300

V f ≤1 kHz VAC

rms

Max. dimensions w × h × l mm

Ordering code (composition see below)

2.2 6.0 × 11.5 × 19.0 B32632A6222+***

3.3 6.0 × 11.5 × 19.0 B32632A6332+***

4.7 6.0 × 11.5 × 19.0 B32632A6472+***

6.8 6.0 × 11.5 × 19.0 B32632A6682+***

6.0 × 11.5 × 19.0 B32632A6103+***

7.0 × 12.0 × 19.0 B32632A6153+***

8.0 × 13.5 × 19.0 B32632A6223+***

9.5 × 15.5 × 19.0 B32632A6333+***

12.0 × 17.0 × 19.0 B32632A6473+***

1250 450

10 15 22 33 47

1.0 6.5 × 11.5 × 19.0 B32632A7102+***

1.5 6.5 × 11.5 × 19.0 B32632A7152+***

2.2 6.5 × 12.0 × 19.0 B32632A7222+***

3.3 7.0 × 12.5 × 19.0 B32632A7332+***

4.7 7.0 × 12.5 × 19.0 B32632A7472+***

6.8 7.5 × 14.0 × 19.0 B32632A7682+***

9.0 × 15.5 × 19.0 B32632A7103+***

12.0 × 16.5 × 19.0 B32632A7153+***

1600 450

10 15

1.0 6.0 × 11.5 × 19.0 B32632A1102+***

1.5 6.0 × 11.5 × 19.0 B32632A1152+***

2.2 7.0 × 12.0 × 19.0 B32632A1222+***

3.3 8.0 × 13.5 × 19.0 B32632A1332+***

4.7 9.5 × 15.5 × 19.0 B32632A1472+***

6.8 10.5 × 16.0 × 19.0 B32632A1682+***

12.5 × 17.5 × 19.0 B32632A1103+***

Ammo

Reel

Untaped pack pcs./unit

pcs./unit

900 1200 1000 900 1200 1000 900 1200 1000 900 1200 1000 900 1200 1000 800 1000 1000 700 900 1000 600 800 500 450 600 500 850 1100 1000 850 1100 1000 850 1100 1000 800 1000 1000 800 1000 1000 750 1000 1000 600 800 500 450 600 500 900 1200 1000 900 1200 1000 800 1000 1000 700 900 1000 600 800 1000 500 700 500 450 600 500

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code: *** = Packaging code:

K = ±10% J = ±5% A = ±3.5% on request = ±2.5%

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 7.5 mm 10 mm 12.5 mm 17.5 mm Packaging code 030 040 050 060

289 = Ammo pack 189 = Reel 010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 17±3 mm) 020 = Double crimped (lead length 6 1 mm)

High pulse (wound)

Ordering codes and packing units (lead spacing 15 mm)

f ≤1 kHz

VDC

VAC

2000 500

rms

Max. dimensions w × h × l mm

Ordering code (composition see below)

0.47 6.5 × 11.5 × 19.0 B32632A2471M***

0.47 6.5 × 11.5 × 19.0 B32632A2471K***

0.68 6.5 × 12.5 × 19.0 B32632A2681M***

0.68 6.5 × 12.5 × 19.0 B32632A2681K***

1.0 6.5 × 12.5 × 19.0 B32632A2102+***

1.5 6.5 × 12.5 × 19.0 B32632A2152+***

2.2 7.0 × 13.5 × 19.0 B32632A2222+***

3.3 8.5 × 15.0 × 19.0 B32632A2332+***

4.7 10.5 × 16.0 × 19.0 B32632A2472+***

6.8 12.5 × 17.5 × 19.0 B32632A2682+***

3000 800

0.47 5.5 × 11.0 × 19.0 B32632S4471+***

0.68 6.0 × 12.0 × 19.0 B32632S4681+***

1.0 7.5 × 13.0 × 19.0 B32632S4102+***

1.5 8.5 × 14.5 × 19.0 B32632S4152+***

2.2 10.5 × 16.0 × 19.0 B32632S4222+***

3.3 12.5 × 18.0 × 19.0 B32632S4332+***

Further E series and intermediate capacitance values on request.

B32632

Ammo

Reel

Untaped pack pcs./unit

pcs./unit

850 1100 1000 850 1100 1000 850 1100 1000 850 1100 1000 850 1100 1000 850 1100 1000 800 1000 500 650 850 500 500 700 500 450 600 500

1000 1300 1000

900 1200 1000 750 1000 500 650 850 500 500 700 500 450 600 500

Composition of ordering code

+ = Capacitance tolerance code: *** = Packaging code:

K = ±10% J = ±5% A = ±3.5% on request = ±2.5%

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 7.5 mm 10 mm 12.5 mm 17.5 mm Packaging code 030 040 050 060

B32633

High pulse (wound)

Ordering codes and packing units (lead spacing 22.5 mm)

f ≤1 kHz

VDC

VAC

630 300 22

1250 450 10

1600 450

rms

Max. dimensions w × h × l mm

Ordering code (composition see below)

6.5 × 12.5 × 27.5 B32633A6223+***

33 47 68

100

7.0 × 15.0 × 27.5 B32633A6333+***

8.0 × 17.0 × 27.5 B32633A6473+***

9.5 × 17.5 × 27.5 B32633A6683+***

11.5 × 19.5 × 27.5 B32633A6104+***

7.0 × 15.0 × 27.5 B32633A7103+***

15 22 33 47

8.0 × 16.0 × 27.5 B32633A7153+***

10.0 × 17.5 × 27.5 B32633A7223+***

12.0 × 19.5 × 27.5 B32633A7333+***

14.0 × 21.0 × 27.5 B32633A7473+***

3.3 7.0 × 13.0 × 27.5 B32633A1332+***

4.7 7.0 × 13.0 × 27.5 B32633A1472+***

6.8 7.0 × 16.0 × 27.5 B32633A1682+***

8.0 × 17.0 × 27.5 B32633A1103+***

9.5 × 17.5 × 27.5 B32633A1153+***

11.5 × 19.5 × 27.5 B32633A1223+***

15.5 × 22.5 × 27.5 B32633A1333+***

2000 500

10 15 22 33

2.2 7.0 × 14.0 × 27.5 B32633A2222+***

3.3 7.0 × 14.0 × 27.5 B32633A2332+***

4.7 7.0 × 15.5 × 27.5 B32633A2472+***

6.8 9.0 × 16.5 × 27.5 B32633A2682+***

10 15 22

10.5 × 17.5 × 27.5 B32633A2103+***

13.0 × 20.5 × 27.5 B32633A2153+***

15.5 × 22.5 × 27.5 B32633A2223+***

Ammo

Reel

Untaped pack pcs./unit

pcs./unit

pcs./unit 550 750 1000

500 700 500 450 600 500 350 500 500 300 400 250 500 700 500 450 600 500 350 500 500 300 400 250 250 350 250 500 700 1000 500 700 1000 500 700 500 450 650 500 350 500 250 300 400 250 250 300 250 500 700 1000 500 700 1000 500 700 500 400 550 500 350 450 250 250 350 250 200 300 250

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code: *** = Packaging code:

K = ±10% J = ±5% A = ±3.5% on request = ±2.5%

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 15 mm 17.5 mm 20 mm 25 mm Packaging code 055 060 070 080

B32633

High pulse (wound)

Ordering codes and packing units (lead spacing 22.5 mm)

f ≤1 kHz

VDC

VAC

2500 750

3000 800

rms

Max. dimensions w × h × l mm

Ordering code (composition see below)

1.0 7.5 × 14.0 × 27.5 B32633A3102+***

1.5 7.5 × 15.0 × 27.5 B32633A3152+***

2.2 8.0 × 16.0 × 27.5 B32633A3222+***

3.3 9.5 × 16.0 × 27.5 B32633A3332+***

4.7 10.0 × 18.5 × 27.5 B32633A3472+***

6.8 12.0 × 20.5 × 27.5 B32633A3682+***

10 15

14.0 × 23.0 × 27.5 B32633A3103+***

17.0 × 26.0 × 27.5 B32633A3153+***

1.0 5.5 × 12.0 × 27.5 B32633S4102+***

1.5 6.5 × 12.5 × 27.5 B32633S4152+***

2.2 7.5 × 14.0 × 27.5 B32633S4222+***

3.3 9.0 × 15.5 × 27.5 B32633S4332+***

4.7 11.0 × 17.0 × 27.5 B32633S4472+***

6.8 13.0 × 19.0 × 27.5 B32633S4682+***

Ammo

Reel

Untaped pack pcs./unit

pcs./unit

pcs./unit 450 650 1000 450 650 1000 450 600 500 350 500 500 350 500 500 300 400 250 250 350 250 200 300 200 650 900 500 550 750 500 450 650 500 400 550 500 300 450 500 250 350 200

Further E series and intermediate capacitance values on request.

Composition of ordering code

+ = Capacitance tolerance code: *** = Packaging code:

K = ±10% J = ±5% A = ±3.5% on request = ±2.5%

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 1 mm) Reduced Reduced Reduced Enlarged Lead spacing (mm) 15 mm 17.5 mm 20 mm 25 mm Packaging code 055 060 070 080

B32634

High pulse (wound)

Ordering codes and packing units (lead spacing 27.5 mm)

f ≤1 kHz

VDC

VAC

630 300 100

1250 450 33

1600 450 15

2000 500 10

rms

150 220 330

47 68

100

22 33 47 68

15 22 33

Max. dimensions w × h × l mm

Ordering code (composition see below)

9.5 × 18.0 × 32.5 B32634A6104+***

12.0 × 22.0 × 32.5 B32634A6154+***

13.5 × 22.5 × 32.5 B32634A6224+***

16.0 × 25.5 × 32.5 B32634A6334+***

9.5 × 18.0 × 32.5 B32634A7333+***

11.5 × 20.0 × 32.5 B32634A7473+***

13.0 × 23.0 × 32.5 B32634A7683+***

16.0 × 26.0 × 32.5 B32634A7104+***

8.5 × 17.0 × 32.5 B32634A1153+***

10.0 × 18.5 × 32.5 B32634A1223+***

12.0 × 22.0 × 32.5 B32634A1333+***

14.0 × 22.5 × 32.5 B32634A1473+***

16.0 × 25.5 × 32.5 B32634A1683+***

8.5 × 17.0 × 32.5 B32634A2103+***

10.0 × 20.0 × 32.5 B32634A2153+***

12.0 × 22.0 × 32.5 B32634A2223+***

15.0 × 25.0 × 32.5 B32634A2333+***

Further E series and intermediate capacitance values on request.

Untaped

pcs./unit 250

200 200 150 250 250 200 150 500 250 250 200 150 500 250 250 200

Composition of ordering code

+ = Capacitance tolerance code: *** = Packaging code:

K = ±10% J = ±5% A = ±3.5% on request = ±2.5%

Packaging codes for further lead configurations (untaped):

Lead configuration (lead length 6 1 mm) Reduced Lead spacing (mm) 25 mm Packaging code 090

010 = Untaped crimped (lead length 6 1 mm) 011 = Untaped crimped (lead length min. 20 mm) 008 = Untaped (straight, lead length 17±3 mm) 020 = Double crimped (lead length 6 1 mm)

Technical data

B32632 ... B32634

High pulse (wound)

Operating temperature range Max. operating temperature T

Upper category temperature T Lower category temperature T Rated temperature T

op,max

max

min

+110 °C +100 °C 55 °C

+85 °C Dissipation factor tan δ 1.0  10-3(at 10 kHz) at 20 °C 2.0  10-3(at 100 kHz) (upper limit values) Insulation resistance R

ins

100 GΩ

at 20 °C, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage 2.0  VR, 2 s Category voltage V

(continuous operation with VDCTA≤ 85 VC= V or VACat f ≤ 1 kHz) 85<TA≤100 VC= VR (165TA)/80 V Operating voltage Vopfor short operating periods TA≤ 85 Vop= 1.25  VC(2000h) Vop= 1.0  V (VDCor VACat f ≤ 1 kHz) 85<TA≤100 Vop= 1.25  VC(1000h) Vop= 1.0  V

TA(°C) DC voltage derating AC voltage derating

= V

C,rms

C,rms=Vrms

rms

 (165TA)/80

TA(°C) DC voltage (max. hours) AC voltage (max. hours)

(2000h)

C,rms

(1000h)

C,rms

Damp heat test 56 days/40 °C/93% relative humidity Limit values after damp Capacitance change ∆C/C ≤ 2% heat test Dissipation factor change ∆ tan δ ≤ 1.0  10-3(at 10 kHz)

Insulation resistance R

ins

≥ 50% of minimum

as-delivered values Reliability:

Failure rate λ 2 fit (≤ 2  10-9/h) at 0.5  VR, 40 °C Service life t

200 000 h at 1.0  VR, 40 °C For conversion to other operating conditions and temperatures, refer to chapter "Quality assurance", page .

Failure criteria: Total failure Short circuit or open circuit

Failure due to variation Capacitance change ∆C/C > 10% of parameters Dissipation factor tan δ > 4  upper limit value

Insulation resistance R

ins

< 1500 MΩ

B32632 ... B32634

High pulse (wound)

Characteristic voltages VDC, VAC, V

630

V 300

560 1250 450 1000 1600 450 1200 2000 500 1400 2500 750 1750 3000 800 1800

B32632 ... B32634

High pulse (wound)

Pulse handling capability

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs.

"k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V2/µs.

Note: The values of dV/dt and k0provided below must not be exceeded in order to avoid damaging the capacitor.

dV/dt values

Lead spacing 15 mm 22.5 mm 27.5 mm V

rms

VDC VAC dV/dt in V/µs

630 300 1250 450 1600 450 2000 500 2500 750 3000 800

5 000 3 000 2 000 12 000 7 000 4 500 14 000 9 000 5 500 17 000 12 000 7 000

 14 000 

18 000 15 000 

k0values

Lead spacing 15 mm 22.5 mm 27.5 mm V

rms

VDC VAC k0in V2/µs

630 300 1250 450 1600 450 2000 500 2500 750 3000 800

6 300 000 3 800 000 2 500 000 30 000 000 17 500 000 11 000 000 45 000 000 29 000 000 17 500 000 68 000 000 48 000 000 28 000 000

 59 000 000 

108 000 000 90 000 000 

B32632 ... B32634

High pulse (wound)

Impedance Z versus frequency f

(typical values)

B32632

High pulse (wound)

Permissible AC voltage V

versus frequency f (for sinusoidal waveforms, TA≤90 °C)

rms

For TA>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 15 mm

630 VDC/300 VAC 1250 VDC/450 VAC

1600 VDC/450 VAC 2000 VDC/500 VAC

B32632

High pulse (wound)

Permissible AC voltage V

versus frequency f (for sinusoidal waveforms, TA≤90 °C)

rms

For TA>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 15 mm

3000 VDC/800 VAC

B32633

High pulse (wound)

Permissible AC voltage V

versus frequency f (for sinusoidal waveforms, TA≤90 °C)

rms

For TA>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 22.5 mm

630 VDC/300 VAC 1250 VDC/450 VAC

1600 VDC/450 VAC 2000 VDC/500 VAC

B32633

High pulse (wound)

Permissible AC voltage V

versus frequency f (for sinusoidal waveforms, TA≤90 °C)

rms

For TA>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 22.5 mm

2500 VDC/750 VAC 3000 VDC/800 VAC

B32634

High pulse (wound)

Permissible AC voltage V

versus frequency f (for sinusoidal waveforms, TA≤90 °C)

rms

For TA>90 °C, please refer to "General technical information", section 3.2.3.

Lead spacing 27.5 mm

630 VDC/300 VAC 1250 VDC/450 VAC

1600 VDC/450 VAC 2000 VDC/500 VAC

B32632 ... B32634

High pulse (wound)

Flyback application Permissible voltage and current / waveform

Permissible current Ippversus frequency for a duty cycle of 20% (t0/t = 0.2):

Approximation formular for duty cycle higher than 20%:

B32632 ... B32634

High pulse (wound)

Flyback application Permissible current Ippversus rated capacitance C

Frequency = 15.75 kHz Frequency = 31.5 kHz

Frequency = 95 kHz

Datasheet B32632, B32634 Datasheet (EPCOS)

Specifications and Main Features

Frequently Asked Questions

User Manual