EOS Wireless Core System Quick Start Guide

Setting Up Your Eos System

wireless

TM

TM

Quick Start Guide

1. Connect the power adapter
cord to the Base Station
(jack marked “DC15V”)

3. Select the correct universal
iPod docking adapter for your
iPod (See section on “Selecting
the correct universal iPod
docking adapter”.)

4. Place iPod in dock.

2. Connect the power supply
to the wall outlet.

5. Plug your Wireless Speaker
into any wall outlet.

6. Turn the volume knob clock­wise to apply power to the
Wireless Speaker.

7. Press the play button on
your iPod or the IR remote

Removing the Integrated Power Supply From the Wireless Speaker

CLICK!

CLICK!

To use your Wireless Speaker on a desktop/bookshelf, remove the power supply from the wireless speaker by
following these steps:

1. Press down on the top of the power supply. The swivel plate beneath the power supply will make a “click”
sound and rotate outward.

2. Rotate adapter forward and remove the power supply from the enclosure.

Reattaching the Power Supply to the Wireless Speaker

1. Coil the cord around your hand.

2. Place the coil of cord in the bottom of the cavity.

3. Press lower edge of swivel plate to rotate forward

4. Insert the power supply into the cavity leaning forward.

5. Press down on the top of the power supply.

6. Rotate the power supply back to a vertical position (making sure to lock the tab at the top of the speaker

cabinet with the groove at the top of the power supply.)