E1012
User Manual
Pleare read this manual before using and
save this manual for future reference.
WELCOME
Thank you for enjoying our series of digital car A/V product.
To properly use this product, please go through this instruction manual for installation
and operation, put it in a safe place for future use!
WARNING
1.Please keep the disk slot clean, wipe it off when there is some dirty on it, please wipe
off the dirty on disk before slot it into the unit. If dirty on disk go into the slot with disk,
that will lead unit to slow slot or cannot read disk. In fact ,that is not quality problem.
Please ask professional to clean the laser. That will bring you some inconvenience.
2.Playing disk for long time or high volume level will influence the lift of unit. To protect
this unit, please work with radio, middle level volume level during long time use.
3.This unit is set up by precision parts. Please do not open the unit or adjust any parts
inside unit by yourself.
4.Please do not touch LCD display by hard object to protect in form scratch.
5.To avoid accident caused by scatterbrain, driver should not operate this unit or watch
its screen. If needed, please park the car in a safe play before operation.
6.This unit is for 12V and negative ground system car, please do not connect it directly in
24V truck or bus.
NOTE: We keep improving this product, if there is any change, forgive us do not
announce.
1
NOTE
● This unit can play the following disc:
MODE
DVD
VCD
MP3
CD
Note: 1. This unit is compatible with MP4/DVD/VCD1.0/2.0/3.0 version,
ICON
CONTENT
Sound,image
Sound,image
Sound only
Sound only
DISC SIZE
12CM
12CM
12CM
12CM
DVD, CD-R, CD-RW, MP3, WMA, JPEG.
2. When play DVD, VCD, MP3, CD disc, display will auto identify
the disk and show corresponding word. When appear on
display, that means no that function, please choose other function.
Detailed operation please refer to other related instructions.
●It may lead to accident if you are going to change unit.
●Playing disk during car run on bumpy road will damage laser. Playing substandard disk
or damage disk will damage laser.
●The environment of inside car is not good, too much dirty, please clean the laser by
laser cleanser timely.
●Do not work under terribly hot or cold environment, please ensure the temperature in
car is in -20℃～60℃.
●During operation, if appear on LCD, that means unit do not support that function,
operation is invalid.
●When unit is showing some abnormal, please refer to TROUBLE SHOOTING in this
instruction manual, If you cannot find any solution, please press RESET to resume to
initial status.
2
SPECIFICATIONS:
FEATURES
Power supply..........................................................................................................DC 12V
Power range...............................................................................................10.8-16.0V DC
Max operate current.....................................................................................................10A
Ground system.........................................................................................Negative ground
FM tuner
Frequency range...........................................................................................87.5-108MHz
Signal/Noisse ratio......................................................................................................55dB
Stereo separation............................................................................................(1KHz)30dB
Search station volt.............................................................................................20-30dBuv
Distortion rate.............................................................................................................1.5%
AM tuner
Frequency range..........................................................................................522-1620KHz
Limit noise sensitivity..................................................................................................32dB
DVD PLAYER
Signal/Noise ratio.......................................................................................................70dB
Frequency response......................................................................................20Hz-20KHz
DVD PLAYER
1. International advanced MPEG-4 DECODE TECHNOLOGY
2. COMPATIBLE WITH MP4 (AVI/DIVX/5.X), DVD(DVD-R/DVD-RW),
VCD, SVCD, CD-RW, WMA, MP3 JPG
3. Multiple subtitles, angles, languages supporting, Child lock function
4. 4 CHANNEL AUDIO OUTPUT MODE
5. PAUSE, PLAY, UP/DOWN, STOP, ZOOM, PBC FUNCTION
6. FM/AM RADIO TUNER
30 RADIO STATION (18FM, 12AM)
BLUETOOTH FUNCTION
1. Bluetooth wireless transfers
2. Support displaying bluetooth paring and connection status, call status and caller's ID
3. Robust performance, fast connection, accurate and sensible search of devices in range
4. Support A2DP, AVRCP, HS/HF for handing calls and playing music.
LCD DISPLAY
1. 7inch, 16:9 TFT LCD display
2. Touch screen
3. Auto adotoried panel
4. Angle of turn adjustable
46
3
BASIC OPERATION
1.SOURCE ON/OFF
Press SOURCE button on panel or PWR button on remote control shortly to power on,
Press SOURCE button on panel or PWR button on remote control longer to power off.
2.PLAYING SOURCE CHOOSE
Press SOURCE button on remote control, unit will switch source of playing as
following sequence:
RADIO → DVD → AUX → TV→Bluetooth
1)During switch mode, TFT LCD display will show the name of mode in English;
2)You can't switch to CDC and GPS mode by SOURCE button, content as follows:
RADIO
DVD
AUX
TV
Bluetooth
3.MUTE CONTROL
Press MUTE button on panel or MUTE button on remote control shortly to turn off
sound output, press again to back to sound output.
4.VOLUME ADJUSTMENT
1)Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch
button on display to adjust volume level.
2)The tone of volume is 0-39.
WIRING DIAGRAM
This player is equipped with ISO standard connector, please follow below instruction:
● Red - ACC ON (+12V) ● Grey/Grey black - Right front speaker anode/cathode
● Yellow - Battery anode (+12V) ● White/White black - Left front speaker anode/cathode
● Black - Ground line ● Purple/Purple black - Right rear speaker anode/cathode
● Blue - Power Antenna Control line ● Green/Green black - Left speaker anode/cathode
● Orange - Backsight camera power
control line
● Pink - Braking line
TONE MODE ADJUSTMENT (SEL)
Press SEL button on remote control shortly or touch area or SEL button on panel to
choose your desired tone mode:
VOL→BAL→TRE→L/R
F/R
NOTE:
1)At DVD playing state, MBP & User will be automatically activated.
2)After 5 seconds you choose desired mode, do not adjust volume button, the mode
will auto to back to status before adjustment.
4
45
TROUBLE SHOOTING
PROBLEM
Can not power on
CAUSE
Check whether power fuse
melt or not
Some factor cause MPU wrong
operation
SOLUTION
Change fuse same as the old one
Press RESET button on the panel by pen
point, then, power on
5.RESET
1) If unit is dad abnormal status appear because of wrong operation, press RES
button on panel by penpoint, unit will resume work.
2) After reset, all setting will resume to setting before leaving factory.
PANEL ARRANGEMENT
After ignition
switch off, setting
information all lose
Remote control no
function
Poor performance
of radio station
Can not load disc
Can not play disc
Can not switch
language/subtitle
No image
Wrong connection between
ignition line ACC and power
line anode pole BAIT
No enough power supply
from battery
Improper set of length of
antenna, poor connection of
antenna grounding
There is a disc in deck
Disc is scratched
Put wrong side of disc into unit
Lens has dirty
There is only one language/
subtitle in disc
Video line between unit and
TV is not properly connected
Reconnect line
Change battery of remote control
Check whether antenna is connected or not,
or poor connection
Check grounding is connected or not
Change new disc
Slot in the disk with sign side up
Clean lens by lens clean disc
If disk is not with multi-language/subtitle, it
cannot switch language/subtitle
Reconnect lines
1.SOURCE BUTTON
2.REL BUTTON
3.MINI USB PORT
4.RESET BUTTON
44
5.REMOTE CONTROL RECEIVER
6.MUTE/TFT ON/OFF BUTTON
7.VOL- BUTTON
8.VOL+BUTTON
9.OPEN BUTTON
5
2.Panel button control instruction
OTHER PLAY MODE
1.SOURCE BUTTON
Press this button for a short moment to turn on power,and long press it to turn off power.
Every button-press activates mode
change as follows:Note:When the
device without connecting to USB.
SD,CDC or DVD no Disc inside,
the system will automatically skip
These related wording mode.
2.Release button
Press this button can take off the control panel.
3.MINI USB PORT
The audio and wiedo docum en ts c an be red by mini USB p or t which is with
standard high speed USB port.
4.RESET BUTTON
Press this button to make the unit back to the mode default.
RADIO
DVD
AUX
USB
SD
TV
GPS
CDC
(Optional)
(Optional)
AUX IN:
AUX IN OPERATION
1) Press “Source” button on remote control or touch “AUX” on the touch screen, switch
to
AUX mode.
2) Make video input plug connect to AUX video input outlet, audio input connect to
AUX audio input outlet.
3)This unit only supply 1pcs video input & 1 pair audio input.
CCD (Car backsight function)
1) If there is a car back
camera on your car, please connect car back control line “BACK” to your car camera
control terminal, and connect video input line to the video output terminal of your car
camera.
2) When car is back, the unit will auto switch to CCD mode, and there is a “ ”
appeared on the screen.
3) You can set CCD image according to your car's own position in general setting mode.
5.REMOTE CONTROL RECEIVER
It can receive infrared massage of remote control.
6.MUTE/TFT ON/OFF BUTTON
Press this bu tt on shortly to t ur n off v ol um e output,press again to resume former
volume level.
Press this button longer to turn on/off TFT LCD display.
7.VOL- BUTTON
Press this button to reduce the volume.
8.VOL+ BUTTON
Press this button to increase the volume.
6
43
Operations and Settings for the Bluetooth Function
1.Features of the Bluetooth function
1)You can use the function buttons on the unit to receive a call or dial a phone number.
2)You can directly use the hand-free microphone to talk on the phone.
3)You can use the build-in volume control switch to adjust the volume at will.
4)You can switch between the Bluetooth hand-free mode and the cell phone mode.
5)You can use your voice to dial a new number (valid only for cell phones with voice
dialing function).
6)With the Bluetooth function, you can use the Bluetooth microphone in the car to talk
with your folks and friends without having to hold your cell phone, so that your hands
are dedicated for driving, which is safer and law-observing. In the mean time, magnetic
radiation from the cell phone is avoided.
2.Bluetooth match conditions
You can shortly touch the Bluetooth function key under the main menu to directly
access the Blueetooth interface.
With a cell phone that supports the function of Blueetooth wireless connection, you can
establish a connection between your cell phone and the automobile-loaded unit under the
Bluetooth mode to achieve date exchange and synchronization.
9.OPEN BUTTON
In other audio source,press this button to slide up or down display.At that time,load disk,
unit will play it and close the display.If there is a disk inside,unit will auto eject disk.
10.Disk Slot
11.Slot indicator light
12.SD Slot
10
11 12
3.Matching and connections between the cell phone and the Bluetooth of the unit
Set your cell phone to the Bluetooth mode, and use the cell phone to search equipments.
After the Bluetooth equipment of the unit is searched, the cell phone will ask you for the
Bluetooth password. Press the unit matching setup button , and enter the Bluetooth
password (0000) and confirm it, and then the cell phone will ask you whether you
authorize
the connection with this equipment or not. Please select “YES”, and the cell phone will be
automatically connected with the said Bluetooth equipment within 30 seconds. “OK LINK”
will be displayed on the Bluetooth interface to show that a connection between the cell
phone and the Bluetooth device has been successfully established. Under and mode
(radio, TV, DVD, etc.), if there is an incoming call to your cell phone which has been
stably
connected to the Bluetooth device of the unit, the unit will switch from other mode to the
Bluetooth mode after the cell phone rings for about 10 seconds. Current mode will be
automatically restored after hang-up.
42
7
MAIN MENU TOUCH OPERATION
BLUETOOTH
DVD
USB/SD
RADIO
Hand-free button: After a phone number is keyed in, press this button to call
the user of this phone number. When there is an incoming call. Press this button
to connect this call.
Hang-up button: When there is an incoming call, press this button to hang up
or refuse to connect it.
Delete button: When a wrong digit is keyed in, press this button to delete the
wrong digit.
TV
Number keys: You can use these number keys to enter a phone number.
Phone number display: The phone number that you have just entered is Displayed
here.
Contact book mode switching
You can touch this button under the Bluetooth mode to select the next mode.
GPS
IPOD
CCD
PATTERN SET
AUX INPUT
Touch this function key to search the dialed numbers. Each time
This key is touched, the cursor will move to the next dialed number.
Touch this function key to search the received numbers. Each time
This key is touched, the cursor will move to the next received number.
Touch this function key to search the missed numbers. Each time
This key is touched, the cursor will move to the next missed number.
8
41
BLUETOOTH TOUCH OPERATION
OSD SETUP
1.Bluetooth hand-free/cell phone switching
2.Voice dialing function
3.Contact book mode switching
4.Matching function during Bluetooth connection
5.Hand-free key
6.Hang-up key
7.Delete key
8.Phone number display
9.Number keys
10.Return to the main screen
Functions and Descriptions
Bluetooth hand-free/cell phone switching
If you touch this switching button at the upper-left corner of the screen under the
Bluetooth hand-free mode, the speaker will beep and the hand-free mode will be
switched to the cell-phone mode.
Voice dialing function
If you touch the “Voice dial” button at the lower-left corner of the screen under the
Bluetooth hand-free mode and the cell-phone mode, you will hear the keying tone, and
you can go ahead with the voice dialing function according to the cell-phone instructions.
Eg, if you wish to call someone, you can pronounce his/her name stored in the cell
phone, then ,the name of the person to be called will be played by the speaker, and the
telephone number of this person will be displayed on the screen and automatically dialed.
To cancel voice dialing
If you wish to disable the voice dialing function in the voice dialing mode, you can press
the “Voice dialing” key again, and this function will be disabled after you hearing the
keying tone.
Exit
Time setting
Radio frequency setting
Radio frequency setting
According to different area to choose frequency,
pls as blew PIC:
Note:There are 3 buttons automatically changed according to your setting change in radio
state when you activate or exit RDS,Changes are as following:
PTY LOUD, TA EQ, AF ST.
TIME DISPLAY AND ADJUST
Time display: Touch main menu into adjust mode, press time setup button, the
corresponding function will be display in yellow words.
(1)Press ”+” on hour to add hour, press “-” to reduce hour;
(2)Press ”+” on minute to add minute, press “-” to reduce minute.
NOTE: Touch the correspondence function, will be display in green background.
The unit include two times system: Europe time (24 hour setup), America time (12
hour setup), when show the AM mark it indicate morning time, when appear the PM
mark, it show the time of afternoon.
Remark:This unit is with RDS function, it will automatically adjust the time when you
activate RDS function of have received RDS radio channels. At no received RDS radio
channels or AM state,you should adjust the time.
Hour
Minute
940
Touch
here.
If the touching is not just ,yuou can use CALIBRATION to adjust.Touch the middle of the
“+” cursor,adjust it as per the order of the figure.
TV
Touch TV mode of the menu or press SOURCE button on remote control to switch to
TV mode, auto scan and store channels.
Press AMS/RPT button on remote control or SCAN touch button on display to auto
scan TV channels. The range of scan if full TV channel. The channels will auto store into
number button in sequence.
1. Switch channel
1) Press SEEK + / SEEK- button on panel or SEEK + / SEEK- on remote control or /
touch button on display, unit will skip to previous or next stored channel.
2) Press number button on remote control, unit will skip to appointed channel, for
example, press 6 button, unit will skip to 6 channel. Press 10+, “_ _” will appear on left
top corner of display, press number button 3,9, unit will skip to 39 channel.
2.Manual tuning TV channel
1) Press and hold SEEK + button on panel, SEEK + button on remote control, or
touch button on display to scan TV channel in increase direction.
2) Press and hold SEEK - button on panel, SEEK - button on remote control, or
touch button on display to scan TV channel in descending direction.
3.TV sound system switch
Press the AUDI button on the touch screen to switch TV sound system. The sequence is
as follows:
PAL I→PAL DK →PAL BG →PAL I
4.Blue screen
The display will be blue when there is no signal.
After adjustment,the interface turn to FM status automatically.
10
39
TV MODE
Modus einstellen
Channel
choosing
Mute
on/off
Auto search and
store channel
One press down to
receive frequency
TV system: Press
PAL I SECAM DK PAL M
NTSC M N PAL I
One press up to
receive frequency
Press up and
down to switch
channel
Enter
Press this function to
adjust angel of LCD
display
Back main
menu
Press this button to
select next channel
Disc open
/close
Function choosing: Please
see picture(3) for detailed
operation
Press this button to
turn back previous
channel
Audio system change:
Press from
PAL I PAL DK
PAL BG
Brightness adjust: press this
button to adjust panel brightness
Volume adjust: press VOL / VOL + button to adjust
volume
Saturation adjust; to adjust
multicolor saturation
Exit setup
Contrastness adjust: press
this button to adjust black
and white of panel
Sharp adjust: press this button to
adjust sharp sound high and low
Bass adjust: press this button to
adjust bass volume
Return previous
menu
Adjust front and
rear speaker
Adjust left and
right speaker
EQ mode
Rock POP
Aus Rock
Tonality adjust: to adjust
panel definition
Clangorous effects: press
once off clangorous,
press again to come back
Resume standard video
38
11
REMOTE CONTROL FUNCTION
POWER ON/OFF
MUTE
TIME DISPLAY
SOURCE
EQ
SEEK+/SEEK-
VOL+/VOL-
SEL
LOUD
BAND/P/N
LOC/RDM
STOP
PLAY/PAUSE
ST/PROG
1.POWER
Press once to switch on, press again to
switch off.
2.MUTE button
Press once to turn off audio output,
press again to resume volume level.
0-10+
AMS/RPT
TITLE
AUDIO
SET PLAYING TIME
SUBTITLE
PBC/MENU
UP/DOWN / L / ENTER
SLOW
ANGLE
SET UP
OSD
ZOOM
MENU
3.DSP
Press this button to show the time.
4.SOURCE button
Press this button to choose audio sources.
5.EQ button
Press this button to choose POP, ROCK,
EQ off.
6.SEEK + ( ) / SEEK ( ) button
Press this button to manual turning, speed
or quick back, previous song and next song.
7.VOL + ( → ) / VOL - ( ← )
Press this button to increase or decrease
volume level.
8.SEL button
Press this button to choose sound feature.
9.LOUD button
Press this button to startup LOUD function.
10.BAND/P/N button
In radio mode, press this button to choose
band. In VCD, DVD mode, press this button
to choose AUTO, PAL or NTSC system.
11.LOC / RDM button
In radio mode, press this button to switch
between local and direction. In VCD, CD
mode, press this key to randomly play.
12.STOP button
Press this button to stop playing.
13.PLAY /PAUSE button
Press this button to switch between play
and pause. In stop mode, press this button
to play.
14.ST/ PROG button
In radio mode, press this button to choose
stereo or mono station. In audio mode, it
can help STOP button to programmed play.
10.CD program play
In CD mode, you can set the sequence of playing by the program function, the operation
is as follow:
When CD is playing, press ST/PROG button, then the display shows:
PROGRAM
PLAY DELETE
Input the NO. of the song you want to program by the remote control, program the first
song, input your desired song, for example, the sixth song, and press number button 6
on the remote control. Program the second song, press button move the cursor to
2 . Input your desired song, for example, the ninth song, press number button 9 on
the remote control. Press button to program play.
Back to the normal mode, press the ST/PROG button , then press button,
Note: This function can only be worked by the remote control.
11.MP3 program play
In MP3 mode, you can set the sequence of playing by the program function, the
operation is as follow:
When MP3 is playing, press ST/PROG button, then the display shows:
PROGRAM
PLAY DELETE
Then, input desired song by remote control.
For example: Program the first song, input 01, press button move the cursor to the
second lattice, input desired song, for example the third song. Program the second song,
press button, work with button, move the cursor to 2 . Input 01, press button
move the cursor to the second lattice, input desired song, for example, the sixth song
(press 6). Press button to program play.
Back to the normal mode, press the ST/PROG button , then press button,
Note: This function can only be worked by the remote control.
12
37
CD/MP3 BASIC OPERATION
Slot in CD/MP3 disc unit will play it automatically. If disc is in slot, press DVD touch
button on main menu can to play.
1. Repeatedly play
In mode, press AMS/RPT button on remote control, to startup following, repeat
CD/MP3
Single song repeat→ Repeat play off.
CD disc:
Single song repeat→ → Repeat play off.
MP3 disc: Directory repeat
2.Speed forward / backward play
Press SEEK + / SEEK - button on remote control, or / touch button on display to
speed forward or backward playing.
Note: Hold above button a bit longer to operate.
3.Previous / next song play
In playing mode, press SEEK + / SEEK - on remote control, or / touch button on
display to choose previous/next song.
4.Pause play
In playing mode, press button on remote control, or touchbutton on display to
pause. Press again to back to normal play.
5.Stop play
In playing mode, 1) Press button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press button on remote control or touch
button on display to resume playing at the stored position.
2) Press button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
6.OSD
In playing mode, short press OSD on remote control to show all information of present
disk.
7. Randomly play
In CD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
8. EQ mode
1) This function can only be worked by remote control.
2) When playing CD/MP3, press the “ZOOM” button on the remote control, you can
choose the sound mode.
9.OPEN
Press OPEN button on panel to eject disc3) When enter this function, press the button
/ / / to move the course to select sound mode which in the system menu, after your
selection position will show red color to indicate the confirmation.
15.0 - 10 + button
Press this button to choose desired song,
section, preset stations.
* Decimal numbers, for example the 19
th
song, press 1,9 button;
* Centesimal numbers, for example, the
th
120 song, press 1,2,0 button.
16.AMS / RPT button
In radio mode, press this button to
browse stored stations. In audio mode,
press this button to play repeatedly.
17.TITLE button
In DVD mode, press this button to play
back to the top menu of disk.
18.AUDIO button
In DVD mode, press this button to switch
language of dialogue. In VCD mode,
press this button to choose left track,
tight track, and stereo.
19.SET playing time
In DVD mode, press this button, you can
define playing time.
20.SUBTITLE button
In DVD mode, press this button to switch
language of subtitle.
21.PBC button
In VCD mode, press this button to display
all song menu, work with number button
to choose songs.
22.UP, DOWN, LEFT, RIGHT, ENTER
button
In DVD mode, press this button to move
cursor up, down, left, right to choose item
in menu. Press enter button to confirm
choice.
23.SLOW button
In audio mode, press this button to slow
backward and slow forward.
24.ANGLE button
In DVD mode, press this button to change
play angle.
25.SETUP button
In audio mode, press this button to choose
different set items.
26.OSD display
Press this button to display the title chapter
and the left time.
27.ZOOM button
In DVD/VCD mode, press this button to
ZOOM in. In CD/MP3/USB/SD mode, press
this button to choose EQ.
28.MENU button
Press button to back to the main menu.
BATTERY CHANGE
When control distance of remote control
become shorter or no function, please
change
battery. Please confirm polarity before
change.
Put battery into controller.
Insert battery holder into controller.
1336
LOADING
15. PBC (MENU) play
In VCD mode, press this button then play the PBC and display will show whole menu in
disk, work with number button to choose song. When you are playing either song of the
PBC, and you want to stop to select another song, press the button to turn off.
Note:
1) This function can be worked by the control.
2) PBC is suitable for the SVCD and VCD 2.0 disc.
3) In PBC mode, you can not press number button only to choose song.
16. VCD program playing
In VCD mode, you can set playing sequence of songs by program play function. The
program playing operation steps are as follows:
In VCD mode, press ST/PTOG button, display will show;
PROGRAM
PLAY DELETE
This white bar shows the
rate of process of loading
a disc.
Note: When loading a disc, touch screen function can not be used.
Input the songs which you want to programmed by the number buttons on remote
control.
Fr example: Program the first song, input your desires song, for example, the fourth
song, and press number button 4 on the remote control. Program the second song,
press button move the cursor to 2 . Input your desired song, for example, the
eighth song, press number button 8 on the remote control. Press button to program
play.
Back to the normal mode, press the ST/PROG button, then press button.
Note: This function can only be worked by the remote control.
14
35
8. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
9.Number button
In VCD mode, press 0-9 number button to input song. For example, you want to choose
th th
13 song, press 10+ button, and then press 3 button once to play 13 song.
Note: This function can only be worked by the remote control.
10. Repeatedly play
In playing mode, press AMS/RPT button on remote control, to startup following, repeat
function. Single song repeat→ Repeat play off.
Note:
1) When playing VCD disc, if PBC is on, no repeat function.
2) After unit is power off or mode is switched to other playing mode except VCD mode,
if you switch back to VCD mode, repeat playing will be cancelled.
11. Randomly play
In VCD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
Note: When VCD disk, if PBC is on, RDM will not work.
12.Scan play
In playing mode, instantly play each song for 15 seconds to scan your desired song.
1) Press 3/INT touch button on display to scan and play from the first song.
2) When heard you desired song, press those button to cancel scan playing, back to
normal playing.
13.Switch Track
In VCD mode, press AUDIO button on remote control to switch track as following
sequence:
Links → Rechts → Stereo →Links
14
.OPEN
Press OPEN button on panel to eject disc.
DISC PLAY TOUCH OPERATION
When playing disc,touch any position of the screen, it will display the function menu, touch
the menu and the operation of relative function will display.
Note:When loading a disc,touch screen function can not be used.
1.Click to choose play/pause
2.Click to reduce the volume
3.Click to stop playing
4.Click to choose the speed of quick back
5.Click to choose the speed speeding play
6.Click to leap backwards to play
7.Click to leap upwards to play
8.Click to exit
9.Click to enter the next page to setup the menu
10.Click to increase the volume
11.Audio
12.Click to display title,chapter the time already
played, the time left.
13.At MP3 mode,press this button so you can
move the cursor to left/right/up/down and select
the songs which in the system menu.Then press
“OK” button to enter.
14.Click to enter next page set up menu
15.In DVD mode,touch this button to return the
directory menu.
16.Click this button to switch to different angles
of playing picture in the disc.
17.Repeat play
DVD:Title Repeat→Chapter Repeat Repeat
play off
VCD:Single song repea Full disc repeat
t→ →
Repeat play off
MP3:Single song repeat Directory repeat
→ →
Repeat play off
18.Click on this button to enter title menu
19.Click this button to choose language,
20.Click this button and the screen will display
0-10 button
21.Click this button to ZOO in/ZOON out the
N
picture.
22.Click to enter the menu of operation for
touching.
23.Click this to choose mode as below:
t→ t→ t→ t→
VOL BASS TRE BAL FAD,after your
desired mode is selected,touch VOL+/VOL- to
adjust the volume.
→
34
15
24.Click to select your desired song or chapter
25.Return to the menu one level.
VCD BASIC OPERATION
Slot in VCD disc, unit will play it automatically. If disc is in slot, press DVD touch button
on main menu can to play.
1.Pause play
In playing mode, press button on remote control, or touchbutton on display to
pause. Press again to back to normal play.
2.Stop play
In playing mode, 1) Press button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press button on remote control or touch
button on display to resume playing at the stored position.
2) Press button on remote control twice to enter into stop mode, here, press
button
on remote control or touch button on display, unit will play from the first song.
26.Press this button to adjust angles of the monitor.
Note:
1.When playing VCD,if PBC FUNCTION is on,repeat play is not available.
2.PCB is only suitable for VCD.
3.For VCD disc with play memory,you can use the PBC function
4.Press PBC in the remote control,Play/OFF PBC,press one time to play from the first song;
5.When PBC is on,you can choose speed forwawd or backward,leap forward of backward,
but repeat play is not available.
6.When PBC is on, choose casual play ,scan play or search play,PBC function will close
automatically.
3.Speed forward / backward play
In playing mode, press SEEK + button on remote control, or touch button on display
to speed play.
When you need quick back, press SEEK - button on remote control, or touch button on
display to quick back play.
Note: Hold above button a bit longer to operate.
4.Previous / next song play
In playing mode, press SEEK + / SEEK - on remote control, or / touch button on
display to choose previous/next song.
5.Switch system
In playing mode, short press the BAND/P/N button on remote control, to select PAL,
AUTO, NTSC TV system.
Note: This function can only be worked by the remote control.
6.Slow play
Press SLOW button on remote control to slow play. The level of slow playing is as follows.
Sequence is :
SLOW 1/2 →SLOW 1/3 →SLOW 1/4 → SLOW1/5
PLAY ← SLOW 1/7 ← SLOW1/6
Note: This function can only be worked by the remote control.
7.Zoom in / Zoom out
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are as
follows:
ZOOM IN 2 →ZOOM IN 3 →ZOOM IN 4 →ZOOM IN 1/2
ZOOM IN OFF ←ZOOM IN 1/4 ←ZOOM IN 1/3
Note:
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
16
33
DIGITAL SETUP
(1.Press or button
DIGITAL SETUP DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
(2.Press or / / button, Then
to enter.
OP MODE
DYNAMIC RANGE
DUAL MONO
LINE OUT
RF REMOD
DVD MODE
AUDIO SETTING ON TOUCH SCREEN
EXIT SETUP
DIGITAL SETUP DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
DIGITAL SETUP DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
EXIT SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
EXIT SETUP
STEREO
MONO L
MONO R
MIX MONO
Audio selection:
VOL →BAS →TRE →BAL→FAD
When using this function, the
position will have a groove for
nothing.
Loud choosing: this function is
defined open, when it is touched at
the first time, the loud function will
be closed, at the same time, yellow
light disappear.
EQ mode: Touch the button
everytime from
ROCK POP
OFF ROCK
The best listening
position choosing
Bass choosing: when
touched the button will be
yellow, touch this button to
exit, touch it again to
resume..
32
17
VIDEO SETTING ON TOUCH SCREEN
You can choose: Brightness,
contrastness, color, sharpness,
adjust the image effect according
to your favor, at the same time,
there will be blue light for noting.
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
VIDEO SETUP
VIDEO SETUP
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
Video mode: When using this
function, the position will have
a groove for nohing.
Image mode: You can choose the area in
the broken line on the panel, standard,
defined, soft, accord what you meed to
choose, when choosing the function, the
bule backsight will disappear.
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
VIDEO SETUP
VIDEO SETUP
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
18
31
VIDEO SETUP
(1.Press or button
VIDEO SETUP
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
(2.Press or / / button, Then
to enter.
VIDEO SETUP
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
RDS USER OPERATION
Touch this
area to enter
& exit main
menu
EXIT SETUP
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
VIDEO SETUP
VIDEO SETUP
EXIT SETUP
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
BRICHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
VIDEO SETUP
VIDEO SETUP
Press this button
to close sound
output, re-press
this button to
resume sound.
Press this button each time, it
will automatically execute the
following operation in an
order of FM1 → FM2 → FM3 →
AM1 → Am2
In the radio state, press “APS” button,
it will automatically seek radio
channels in the whole band and preset
the strongest radio channels.
Short press on this button to decrease
radio frequency; longer press on this
button to seek radio channels
frequency decreased direction.
Short press on this button to
increase radio frequency; longer
press on thisbutton to seek radio
channels frequency increased
direction.
Press TA, when TA is on, it
means the unit is automatically
track RDS radio channels.
Press PTY, when PTY is on, it
means there is strong RDS
signals output.
Press this button to choose
radio channels' name, please
refer to details user manual.
Press “SEL” to adjust other
functions, please refer to pic 3.
For details of RDS operation, please refer to other instruction
Press this button to
adjust angles of the
monitor.
30
19
RDS
1.EON (RDS Mark)
Indicate main unit is on auto tracking RDS mode.
2.AF (RDS Auto Tracking Mark)
Indicate radio is auto tracking RDS channel.
3.TA (RDS Signal Increasing Output)
Indicate RDS channel have signal increasing output.
4.TP (RDS Channel Stereo Mark)
Indicate RDS channel is on stereo playing mode.
5.POP.M (RDS Channel Mark)
Indicate RDS channel name.
I.RDS Tracking System
Press AF button in FM mode, and then press / last 2 minutes, RDS will auto
search channel up and down, it will stop searching when RDS channel be founded, but
“AF” will keep remaining on the screen and waits for the next traffic emergency report.
II.RDS Tracking on Playing Mode
In playing mode, “AF” tracking system keeps on opening and waits for traffic emergency
report.
1)PTY: RDS button, press once will show music mode POP, press 1-6 function
memory button, every group have 2 channel.
POP M ROCK M EASY M LIGHT M CLASSICS M
OTHER M JAZZ COUNTRY NATION
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT XETUP
AUDIO SETUP
(1.Press or button
AUDIO SETUP
AUDIO OUT
KEY
EXIT XETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT XETUP
KOREAN
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
JAPAN
(2.Press or / / button, Then
to enter.
AUDIO SETUP
AUDIO OUT
KEY
EXIT XETUP
SPDIF/OFF
SPDIF/ RAW
PCM
SPDIF/
2)Press PTY button twice and then press 1-6 function memory button, every button
have 3 channel.
NEWS AFFAIRS INFORMATION SPORT
EDUCATION DRAMA CULTURE SCIENCE
CHILDREN SOCIETT TELIGION PHONING TRAVEL
Note: RDS channel in broken line is available.
AF: RDS auto search button, in radio mode also can press this button shortly auto
tracking RDS channel, press this button shortly can cancel RDS function.
TA: In RDS mode, press this button can output TA signal, and check RDS channel is
exist or not, if no RDS signal TFT will show “NO. TA. TP”.
20 29
AUDIO OUT
KEY
EXIT XETUP
AUDIO SETUP
AUDIO OUT
KEY
EXIT XETUP
AUDIO SETUP
39
LANGUAGE SETUP
(1.Press or button
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT XETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT XETUP
(2.Press or / / button, Then
to enter.
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT XETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT XETUP
KOREAN
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
JAPAN
KOREAN
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
JAPAN
RADIO OPERATION
1.Band selection
In radio mode, press BAND button, BAND/P/N button on remote control, or touch position
of switch bank position every time to choose band, the sequence is as follows:
Fm1 Fm2 Fm3 Am1
Fm1
2.Adjust frequency
Manually adjust frequency:
Press SEEK + button on remote control, or touch button on display shortly every time,
frequency will increase one step by one step till you get desired frequency. Press SEEK button on remote control, or touch button on display shortly every time, frequency
will decrease on step by step till you get desired frequency.
Search station:
Press SEEK + / SEEK - button on remote control, or / touch button on display
shortly every time to search station in up/down direction. When get one station, it
will auto stop searching.
3.Browse / Auto search and store station
1)In radio mode, press AMS/RPT button on remote control, or APS button on display
shortly to browse preset station on 1-6;
2)In radio mode, press AMS/RPT button on remote control, or APS button on display
longer to auto search in whole band from present frequency and store 6 most strong
frequency on 1-6;
3)This unit has FM1, FM2, FM3, AM1, AM2 band, Each band can preset 6 stations, total
30preset stations.
Note: After preset station, unit will cancel the former preset stations.
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT XETUP
28
LANGUAGE SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT XETUP
KOREAN
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
LATIN
JAPAN
4.Mono/Stereo Selection
In radio mode, press ST/PTOG button on remote control or ST touch position on display
to
choose mono/stereo program.
Note: In radio mode, start up the stereo function automatic, touch the ST button again on
the display, the TFT display will show the ST OFF & MOMO mark, that is to turn off the
stereo. When the right under foot appear the MONO mark, it show the MONO on.
5.Manual preset and store station
In radio mode, press 1-6 button on remote control, or 1-6 position on display longer to
store preset frequency into preset channel. For example, the present frequency is
89.8MHz, press 2 button longer, then 89.8MHz frequency is stored in 2 channel.
21
DVD BASIC OPERATION
Slot in DVD disc, unit will play it automatically. If disc is in slot, press DVD touch button
on main menu can to play.
1.Pause play
In playing mode, press button on remote control, or touchbutton on display to
pause. Press again to back to normal play.
2.Stop play
In playing mode, 1) Press button on remote control to enter the pause mode, the
position will be stored in unit. At that time, press button on remote control or touch
button on display to resume playing at the stored position.
2) Press button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SYSTEM SETUP
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
Note:
1.Affer input code,Dress ENTER button to tum on child lock.
2.Move cursor to level itern,Choose desired level.
3.You only can choose level at unlock state.
3.Speed forward / backward play
In playing mode, press SEEK + button on remote control, or touch button on display
to speed play.
When you need quick back, press SEEK - button on remote control, or touch button
on display to quick back play.
Note: Hold above button a bit longer to operate.
4.Previous / next song play
In playing mode, press SEEK + / SEEK - on remote control, or / touch button on
display to choose previous/next song.
5.Switch system
In playing mode, short press the BAND/P/N button on remote control, to select PAL,
AUTO, NTSC TV system.
Note: This function can only be worked by the remote control.
6.Slow play
Press SLOW button on remote control to slow play. The level of slow playing is as
follows.
Sequence is : SLOW 1/2 →SLOW 1/3 →SLOW 1/4 → SLOW1/5
PLAY ← SLOW 1/7 ← SLOW1/6
7.Zoom in / Zoom out
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are as
follows:
ZOOM IN 2 → ZOOM IN 3 → ZOOM IN 4 → ZOOM IN ½
ZOOM IN OFF ←ZOOM IN 1/4 ←ZOOM IN 1/3
Note:
1. This function can only be worked by the remote control.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move.
3. Image which is zoomed out cannot be moved.
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SYSTEM SETUP
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SYSTEM SETUP
1 KID SAFE
2 G
3 PG
4 PG13
5 PG-R
6 R
7 NC-17
8 ADULT
SYSTEM SETUP
RESTORE
22 27
SYSTEM SETUP
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SYSTEM SETUP
NTSC
PAL
AUTO
SYSTEM SETUP
S-VIDEO
8.OSD
In playing mode, short press OSD on remote control to show all information of present disc.
9.Repeatedly play
In play mode, press AMS/RPT button on remote control to start up follow repeat function.
Repeat(chapter)→Repeat(section)→Repeat(off)
10.Angle switch
If the DVD disc is recorded with multi-angles, you can press the ANGLE button to switch
the angle during playing.
The sequence is as follow:
ANGLE 1 → ANGLE 2 → ANGLE 3
Note:
1. It just can be worked by the remote control.
2. It is only for the DVD disc which has multi-angle.
3. If there is a sign on the cover of the DVD disc. The number in the sign means how
many angles the disc has.
4. You can not switch the angle when slow playing.
11.Multi-audio
There are different languages of dialogue and audio systems in DVD disc.
If the DVD disc is recorded with multi-audio, you can switch the language of dialogue and
the audio systems when playing.
Press the AUDIO button repeatedly to change the language of dialogue.
Note
1. It just can be worked by the remote control.
2. It is only for the DVD disc which has multi-language.
3. If there is a sign on the cover of the DVD disc, means that it was recorded
by multi-language/audio system.
4. In VCD mode, press the AUDIO button to select the L/R or STEREO track.
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
26
SYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
SYSTEM SETUP
4:3PS
4: 3LB
16:9
12.Multi-subtitle
If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.
Press the sub-t button repeatedly to change the language.
Note:
1. It just can be worked by the remote control.
2. It only for the DVD disc which is recorded with multi-wubtitle.
3. If there is a sign on the cover of the DVD disc means theat it has several
subtitle.
13. Title select
In DVD mode, press TITLE button to back to the title menu. Display shows all the titles of
the disc. You can select the chapter you want by the cursor, press play button to play the
chapter.
Note: It just can be worked by the remote control.
23
14. MENU select
In playing mode, press PBC button on remote control to back to the menu, display will
show chapter and section in disc. Work with / button on remote control or touch
button on display to choose your desired song. Press button / ENTER button to play.
Note: This function can only be worked by the remote control.
OPEN: Press OPEN button on panel to eject disc.
15. Program play
In DVD mode, you can set the sequence of playing by the program function, the
operation
is as follow:
PROGRAM
T C
T C T C T C
PLAY CHEAN
When DVD is playing, press ST / PROG button, then display shows:
For example, program the first song, input 01, press button move the cursor to the
second lattice, input desired song, for example, the third song. Program the second
song, press button, move the cursor to 2 . input 01, press button move the
cursor to the second lattice, input desired song, for example, the 6 song (press 6).
th
Press button to
program play. Back to the normal mode, press the ST/PROG button, then press button.
Note: This function can only be worked by the remote control.
17. Set up
Press SET UP button, display will show the system set up menu and the submenu, select
the item you want by , after selecting the proper item, press / / / to press
ENTER to confirm.
Note:
1. It just can be worked by the remote control.
2. Some function setting maybe different because of the different model or disc.
3. If the selected language is not recorded in the disc, then unit will show the appointed
language,
4. About the “SET UP”, please read the follow.
Press “SET UP” on the remote control, it will appear the following touch menu:
16. Digital album
Play the disc contains JPEG pictures, read the picture menu first.
1. Press button on remote control, the pictures will be browsed automatically. (It also
can be worked to press number 6 button on the unit.)
2. Press ENTER button on the remote control, it can be manual browsed by SEEK +and
SEEK -.
3. ZOOM in picture function: During auto browsing, press pause button stop the screen,
press ZOOM button to zoom in or zoom out the picture. During manual browsing, you
can press ZOOM button to zoom in or zoom out picture directly.
4.Under zoom in picture, you can move the picture by .
Note: You can not move picture in normal mode and zoom out mode.
24
25
Loading...