Eonon E0858 Instruction Manual

Download

Page 1

E0858

User Manual

Pleare read this manual before using and save this manual for future reference.

Page 2

Page 3

SPECIFICATIONS:

Power supply..........................................................................................................DC 12V

Power range...............................................................................................10.8-16.0V DC

Max operate current.....................................................................................................10A

Ground system.........................................................................................Negative ground

FM tuner

Frequency range...........................................................................................87.5-108MHz

Signal/Noisse ratio......................................................................................................55dB

Stereo separation............................................................................................(1KHz)30dB

Search station volt.............................................................................................20-30dBuv

Distortion rate.............................................................................................................1.5%

WELCOME

Thank you for enjoying our series of digital car A/V product. To properly use this product, please go through this instruction manual for installation and operation, put it in a safe place for future use!

WARNING

1.Please keep the disk slot clean, wipe it off when there is some dirty on it, please wipe off the dirty on disk before slot it into the unit. If dirty on disk go into the slot with disk, that will lead unit to slow slot or cannot read disk. In fact ,that is not quality problem. Please ask professional to clean the laser. That will bring you some inconvenience.

2.Playing disk for long time or high volume level will influence the lift of unit. To protect this unit, please work with radio, middle level volume level during long time use.

3.This unit is set up by precision parts. Please do not open the unit or adjust any parts inside unit by yourself.

AM tuner

Frequency range..........................................................................................522-1620KHz

Limit noise sensitivity..................................................................................................32dB

DVD PLAYER

Signal/Noise ratio.......................................................................................................70dB

Frequency response......................................................................................20Hz-20KHz

4.Please do not touch LCD display by hard object to protect in form scratch.

5.To avoid accident caused by scatterbrain, driver should not operate this unit or watch its screen. If needed, please park the car in a safe play before operation.

6.This unit is for 12V and negative ground system car, please do not connect it directly in 24V truck or bus.

NOTE: We keep improving this product, if there is any change, forgive us do not announce.

Page 4

NOTE

● This unit can play the following disc:

MODE

DVD

VCD

ICON

CONTENT

Sound,image

DISC SIZE

12CM

WIRING DIAGRAM

This player is equipped with ISO standard connector, please follow below instruction:

● Red - ACC ON (+12V) ● Grey/Grey black - Right front speaker anode/cathode

● Yellow - Battery anode (+12V) ● White/White black - Left front speaker anode/cathode

● Black - Ground line ● Purple/Purple black - Right rear speaker anode/cathode

● Blue - Power Antenna Control line ● Green/Green black - Left speaker anode/cathode

● Orange - Backsight camera power

control line

● Pink - Braking line

MP3

Note: 1. This unit is compatible with MP4/DVD/VCD1.0/2.0/3.0 version,

Sound only

12CM

DVD, CD-R, CD-RW, MP3, WMA, JPEG.

2. When play DVD, VCD, MP3, CD disc, display will auto identify the disk and show corresponding word. When appear on display, that means no that function, please choose other function. Detailed operation please refer to other related instructions.

●It may lead to accident if you are going to change unit.

●Playing disk during car run on bumpy road will damage laser. Playing substandard disk

or damage disk will damage laser.

●The environment of inside car is not good, too much dirty, please clean the laser by laser cleanser timely.

●Do not work under terribly hot or cold environment, please ensure the temperature in car is in -20℃～60℃.

●During operation, if appear on LCD, that means unit do not support that function, operation is invalid.

●When unit is showing some abnormal, please refer to TROUBLE SHOOTING in this instruction manual, If you cannot find any solution, please press RESET to resume to initial status.

Page 5

TROUBLE SHOOTING

FEATURES

PROBLEM

Can not power on

After ignition switch off, setting information all lose

Remote control no function

Poor performance of radio station

Can not load disc

Can not play disc

Can not switch language/subtitle

No image

CAUSE

Check whether power fuse melt or not

Some factor cause MPU wrong operation

Wrong connection between ignition line ACC and power line anode pole BAIT

No enough power supply from battery

Improper set of length of antenna, poor connection of antenna grounding

There is a disc in deck

Disc is scratched

Put wrong side of disc into unit

Lens has dirty

There is only one language/ subtitle in disc

Video line between unit and TV is not properly connected

SOLUTION

Change fuse same as the old one

Press RESET button on the panel by pen point, then, power on

Reconnect line

Change battery of remote control

Check whether antenna is connected or not, or poor connection

Check grounding is connected or not

Change new disc

Slot in the disk with sign side up

Clean lens by lens clean disc

If disk is not with multi-language/subtitle, it cannot switch language/subtitle

Reconnect lines

DVD PLAYER

1. International advanced MPEG-4 DECODE TECHNOLOGY

2. COMPATIBLE WITH MP4 (AVI/DIVX/5.X), DVD(DVD-R/DVD-RW), VCD, SVCD, CD-RW, WMA, MP3 JPG

3. Multiple subtitles, angles, languages supporting, Child lock function

4. 4 CHANNEL AUDIO OUTPUT MODE

5. PAUSE, PLAY, UP/DOWN, STOP, ZOOM, PBC FUNCTION

6. FM/AM RADIO TUNER 30 RADIO STATION (18FM, 12AM)

BLUETOOTH FUNCTION

1. Bluetooth wireless transfers

2. Support displaying bluetooth paring and connection status, call status and caller's ID

3. Robust performance, fast connection, accurate and sensible search of devices in range

4. Support A2DP, AVRCP, HS/HF for handing calls and playing music.

LCD DISPLAY

1. 7inch, 16:9 TFT LCD display

2. Touch screen

3. Auto adotoried panel

4. Angle of turn adjustable

Page 6

BASIC OPERATION

OTHER PLAY MODE

1.SOURCE ON/OFF

Press SOURCE button on panel or PWR button on remote control shortly to power on, Press SOURCE button on panel or PWR button on remote control longer to power off.

2.PLAYING SOURCE CHOOSE

Press SOURCE button on remote control, unit will switch source of playing as following sequence:

RADIO → DVD → AUX → TV→Bluetooth

1)During switch mode, TFT LCD display will show the name of mode in English;

2)You can't switch to CDC and GPS mode by SOURCE button, content as follows: RADIO DVD AUX TV Bluetooth

3.MUTE CONTROL

Press MUTE button on panel or MUTE button on remote control shortly to turn off sound output, press again to back to sound output.

4.VOLUME ADJUSTMENT

1)Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch button on display to adjust volume level.

2)The tone of volume is 0-39.

TONE MODE ADJUSTMENT (SEL)

Press SEL button on remote control shortly or touch area or SEL button on panel to choose your desired tone mode:

VOL→BAL→TRE→L/R

AUX IN:

AUX IN OPERATION

1) Press “Source” button on remote control or touch “AUX” on the touch screen, switch to AUX mode.

2) Make video input plug connect to AUX video input outlet, audio input connect to AUX audio input outlet.

3)This unit only supply 1pcs video input & 1 pair audio input.

CCD (Car backsight function)

1) If there is a car back camera on your car, please connect car back control line “BACK” to your car camera control terminal, and connect video input line to the video output terminal of your car camera.

2) When car is back, the unit will auto switch to CCD mode, and there is a “ ” appeared on the screen.

3) You can set CCD image according to your car's own position in general setting mode.

F/R

NOTE:

1)At DVD playing state, MBP & User will be automatically activated.

2)After 5 seconds you choose desired mode, do not adjust volume button, the mode will auto to back to status before adjustment.

Page 7

Operations and Settings for the Bluetooth Function

1.Features of the Bluetooth function

1)You can use the function buttons on the unit to receive a call or dial a phone number.

2)You can directly use the hand-free microphone to talk on the phone.

3)You can use the build-in volume control switch to adjust the volume at will.

4)You can switch between the Bluetooth hand-free mode and the cell phone mode.

5)You can use your voice to dial a new number (valid only for cell phones with voice dialing function).

6)With the Bluetooth function, you can use the Bluetooth microphone in the car to talk with your folks and friends without having to hold your cell phone, so that your hands are dedicated for driving, which is safer and law-observing. In the mean time, magnetic radiation from the cell phone is avoided.

2.Bluetooth match conditions

You can shortly touch the Bluetooth function key  under the main menu to directly access the Blueetooth interface. With a cell phone that supports the function of Blueetooth wireless connection, you can establish a connection between your cell phone and the automobile-loaded unit under the Bluetooth mode to achieve date exchange and synchronization.

5.RESET

1) If unit is dad abnormal status appear because of wrong operation, press RES button on panel by penpoint, unit will resume work.

2) After reset, all setting will resume to setting before leaving factory.

PANEL ARRANGEMENT

3.Matching and connections between the cell phone and the Bluetooth of the unit

Set your cell phone to the Bluetooth mode, and use the cell phone to search equipments. After the Bluetooth equipment of the unit is searched, the cell phone will ask you for the Bluetooth password. Press the unit matching setup button , and enter the Bluetooth password (0000) and confirm it, and then the cell phone will ask you whether you authorize the connection with this equipment or not. Please select “YES”, and the cell phone will be automatically connected with the said Bluetooth equipment within 30 seconds. “OK LINK” will be displayed on the Bluetooth interface to show that a connection between the cell phone and the Bluetooth device has been successfully established. Under and mode (radio, TV, DVD, etc.), if there is an incoming call to your cell phone which has been stably connected to the Bluetooth device of the unit, the unit will switch from other mode to the Bluetooth mode after the cell phone rings for about 10 seconds. Current mode will be automatically restored after hang-up.

Page 8

PANEL BUTTON CONTROL INSTRUCTION

1.Power on/off/function MODE button

2.2.Disk out button

3.Band button

4.AMS program Preset /TV Auto Save/Play Repeat button

Hand-free button: After a phone number is keyed in, press this button to call

the user of this phone number. When there is an incoming call. Press this button to connect this call.

Hang-up button: When there is an incoming call, press this button to hang up

or refuse to connect it.

Delete button: When a wrong digit is keyed in, press this button to delete the

wrong digit.

5. Selection/Previous/hand-free

6. Selection/Next/Hang-up

7. Pause button

8.Release button

9.SD socket

10.AUX External input

11.USB Socket

12.Reset button

13.LCD Display window

14.Disk load slot

15.Remote controller receiving window

16.(VOL/SEL)Volume adjustment mode

17.PIC color selection button

18. UP adjustment (TFT screen)/Hand-free

19. DN Adjustment (TFT SCREEN) /hand up

20.MENU button

21.TFT screen extend/retreat

22.MUTE/TFT ON / OFF button

Number keys: You can use these number keys to enter a phone number. Phone number display: The phone number that you have just entered is Displayed

here.

Contact book mode switching

You can touch this button under the Bluetooth mode to select the next mode.

Touch this function key to search the dialed numbers. Each time

This key is touched, the cursor will move to the next dialed number.

Touch this function key to search the received numbers. Each time

This key is touched, the cursor will move to the next received number.

Touch this function key to search the missed numbers. Each time

This key is touched, the cursor will move to the next missed number.

Page 9

BLUETOOTH TOUCH OPERATION

2.Panel button control instruction

1.Power On/Off / Function MODE button

Press this button for a short moment to turn on power, and long press it to turn off power. Every button-press activates mode change as follows:

1.Bluetooth hand-free/cell phone switching

2.Voice dialing function

3.Contact book mode switching

4.Matching function during Bluetooth connection

5.Hand-free key

6.Hang-up key

7.Delete key

8.Phone number display

9.Number keys

10.Return to the main screen

Functions and Descriptions

Bluetooth hand-free/cell phone switching

If you touch this switching button at the upper-left corner of the screen under the Bluetooth hand-free mode, the speaker will beep and the hand-free mode will be switched to the cell-phone mode.

Voice dialing function

If you touch the “Voice dial” button at the lower-left corner of the screen under the Bluetooth hand-free mode and the cell-phone mode, you will hear the keying tone, and you can go ahead with the voice dialing function according to the cell-phone instructions. Eg, if you wish to call someone, you can pronounce his/her name stored in the cell phone, then ,the name of the person to be called will be played by the speaker, and the telephone number of this person will be displayed on the screen and automatically dialed.

To cancel voice dialing

If you wish to disable the voice dialing function in the voice dialing mode, you can press the “Voice dialing” key again, and this function will be disabled after you hearing the keying tone.

Every button-press activates mode change as follows:Note:When the device without connecting to USB. SD,CDC or DVD no Disc inside, the system will automatically skip These related wording mode.

2.Disc Out button

Press this button can eject the disc.

3.BAND/SYS /P.N

In radio mode, press this button to switch bank, every time to choose band, the sequence is as follows:

In TV mode, shortly press this button to switch TV sound system. The sequence is as

In play state:Short press this button can select following 3 video system

4.AMS Program preset/TV Auto Save/Play Repeat button

Under radio mode,Press this button for a short moment to start scanning preset programs. Under TV mode,Press this button for a short moment to activate auto search and TV Channels will be automatically saved . Under PLAY mode,press it to repeat playing a single song, and press it again to turn off this function.

FM1

SECAM

PAL

AM2

PAL I

FM2

PAL M

AUTO

AM1

NTSC

FM3

PAL N

RADIO

DVD

AUX

USB

GPS

CDC

(Optional)

Page 10

5. Selection/Previous/hand-free

At the Radio state:short press this button can adjust the radio frequency by single step.Long press the button can seek up the radio station automatically.At TV state:short press this button to select previous channel.Long press it can adjust the frequency step

by step.In the play state::short press this button to select the previous song .Long press it can do fast backward at X2.X4.X8.X16.X20's speed,At bluetooth state:When a phone come in, press this button can answer the phone.

Touch TV mode of the menu or press SOURCE button on remote control to switch to TV mode, auto scan and store channels. Press AMS/RPT button on remote control or SCAN touch button on display to auto scan TV channels. The range of scan if full TV channel. The channels will auto store into number button in sequence.

6. Selection/Next/Hang-up

At the Radio state:short press this button can adjust the radio frequency down by single step,Long press the button can seek down the radio station automatically.At TV state:

short press this button to select next channel.Long press it can adjust the frequency step by step.In the play state:short press this button to select the next song.Long press it can

do fast forward at X2.X4.X8.X16.X20's speed,At bluetooth sate:When a phone come in,press this button can hang up the phone.

7. Pause button

In playing state,press this button to execute play/pause.

8.Release button

Press this button can take off the control panel

9.SD socket

This is a high-spees transmission interface,which can read high-capacity date in MP3 or MP4 format.

10.Aux External Input

External connected audio input.

11.USB socket

Connect the USB memory to this socket, and the unit can play music format files supported by this unit in the USB memory

12.Reset button

Press this button can back to default mode.

13.LCD Display Window

Under radio mode:Channel and frequency are displayed,Under PLAY mode,the directory of the song and time elapsed are displayed.

1. Switch channel

1) Press SEEK + / SEEK- button on panel or SEEK + / SEEK- on remote control or / touch button on display, unit will skip to previous or next stored channel.

2) Press number button on remote control, unit will skip to appointed channel, for example, press 6 button, unit will skip to 6 channel. Press 10+, “_ _” will appear on left top corner of display, press number button 3,9, unit will skip to 39 channel.

2.Manual tuning TV channel

1) Press and hold SEEK + button on panel, SEEK + button on remote control, or touch button on display to scan TV channel in increase direction.

2) Press and hold SEEK - button on panel, SEEK - button on remote control, or touch button on display to scan TV channel in descending direction.

3.TV sound system switch

Press the AUDI button on the touch screen to switch TV sound system. The sequence is as follows:

PAL I→PAL DK →PAL BG →PAL I

4.Blue screen

The display will be blue when there is no signal.

14.Disk load slot

Opening for disks to enter or retreat.

15. Remote Controller Receiving Window

It receives infra red signals from the remote controller which fits this device.

16.(VOL/SEL) Volume adjustment mode

Repeat pressing this button can select the VOL. BAS. TRE. FAD adjustment mode. Then can rotate the button to adjust VOL. BAS. TRE. FAD as your likes.

Page 11

TV MODE

Mute on/off

Auto search and store channel

Channel choosing

Press up and down to switch channel

Enter

Press this function to adjust angel of LCD display

Back main menu

Press this button to select next channel

17.PIC Color selection button

Short press this button to chroma setup in the following level:

Bright

Self Set

18. DN Adjustment(TFT Screen)

After the display screen is extended,Press this button to adjust the downward view angle of the screen in 5 steps of adjusting angle.

19. UP Adjustment(TFT Screen)

After the display screen is extended,Press this button to adjust the upward view angle of the screen in 5 steps of adjusting angle.

20.MENU button

Press this button in any mode to go back to the main menu.

21.TFT Display screen extend/Retreat

Press this button to extend the TFT screen from the device or retreat it back.The maximum angle of extension is 104 degree. Attention:Under the disk playing mode,There is no image display at the moment of screen extension after the button is pushed.It will become normal in 3 seconds.

22.MUTE/TFT ON /OFF button

Press this button for the first time to trrn off audio output,and press again to restore to the original audio output.Press this button longer to turn on /off TFT LCD display.

Soft

Sharp

Standard

One press down to receive frequency

TV system: Press

PAL I SECAM DK PAL M

NTSC M N PAL I

One press up to receive frequency

Disc open /close

Function choosing: Please see picture(3) for detailed operation

Press this button to turn back previous channel

Audio system change: Press from

PAL I PAL DK

PAL BG

940

Page 12

MAIN MENU TOUCH OPERATION

BLUETOOTH

AUDIO FREQUENCY

DVD

GPS

USB/SD

IPOD

CCD

RADIO

AUX INPUT

This function shows that the effect of standard audio output.

TONE

PATTERN SET

Note: You can change the timbre of the sound in DVD mode. We suggest keep it in the original place.

Page 13

MUSIC SURROUNDINGS SETTING

OSD SETUP

Church

Concert

Note: This function only is used with the remote control in CD/MP3/USB/SD mode.

Wide

Live

Passive

EQ SETTING

Minute

Exit

Radio frequency setting

Car backsight left/right

image selection

Time setting

Note:There are 3 buttons automatically changed according to your setting change in radio state when you activate or exit RDS,Changes are as following: PTY LOUD, TA EQ, AF ST.

Links

RDS on/off optional

Stunde

Rechts

Note:When you touch each button,there is blue background and yellow words on the screen

User defined

Classic

Standard

Rock

Jazz

Pop

TIME DISPLAY AND ADJUST

Time display: Touch main menu into adjust mode, press time setup button, the corresponding function will be display in yellow words. (1)Press ”+” on hour to add hour, press “-” to reduce hour; (2)Press ”+” on minute to add minute, press “-” to reduce minute. NOTE: Touch the correspondence function, will be display in green background. The unit include two times system: Europe time (24 hour setup), America time (12 hour setup), when show the AM mark it indicate morning time, when appear the PM mark, it show the time of afternoon.

Remark:This unit is with RDS function, it will automatically adjust the time when you activate RDS function of have received RDS radio channels. At no received RDS radio channels or AM state,you should adjust the time.

Page 14

Modus einstellen

Brightness adjust: press this button to adjust panel brightness

Sharp adjust: press this button to adjust sharp sound high and low

10.CD program play

In CD mode, you can set the sequence of playing by the program function, the operation is as follow: When CD is playing, press ST/PROG button, then the display shows:

PROGRAM

Volume adjust: press VOL / VOL + button to adjust volume

Saturation adjust; to adjust multicolor saturation

Exit setup

Bass adjust: press this button to adjust bass volume

Return previous menu

Adjust front and rear speaker

Adjust left and right speaker

EQ mode

Rock POP Aus Rock

Tonality adjust: to adjust panel definition

Clangorous effects: press once off clangorous, press again to come back

PLAY DELETE

Input the NO. of the song you want to program by the remote control, program the first song, input your desired song, for example, the sixth song, and press number button 6 on the remote control. Program the second song, press button move the cursor to 2 . Input your desired song, for example, the ninth song, press number button 9 on the remote control. Press button to program play. Back to the normal mode, press the ST/PROG button , then press button, Note: This function can only be worked by the remote control.

11.MP3 program play

In MP3 mode, you can set the sequence of playing by the program function, the operation is as follow: When MP3 is playing, press ST/PROG button, then the display shows:

PROGRAM

PLAY DELETE

Then, input desired song by remote control. For example: Program the first song, input 01, press button move the cursor to the second lattice, input desired song, for example the third song. Program the second song, press button, work with button, move the cursor to 2 . Input 01, press button move the cursor to the second lattice, input desired song, for example, the sixth song (press 6). Press button to program play. Back to the normal mode, press the ST/PROG button , then press button, Note: This function can only be worked by the remote control.

Contrastness adjust: press this button to adjust black and white of panel

Resume standard video

Page 15

CD/MP3 BASIC OPERATION

REMOTE CONTROL FUNCTION

Slot in CD/MP3 disc unit will play it automatically. If disc is in slot, press DVD touch button on main menu can to play.

1. Repeatedly play

In mode, press AMS/RPT button on remote control, to startup following, repeat

CD/MP3

Single song repeat→ Repeat play off.

CD disc:

Single song repeat→ → Repeat play off.

MP3 disc: Directory repeat

2.Speed forward / backward play

Press SEEK + / SEEK - button on remote control, or / touch button on display to speed forward or backward playing. Note: Hold above button a bit longer to operate.

3.Previous / next song play

In playing mode, press SEEK + / SEEK - on remote control, or / touch button on display to choose previous/next song.

4.Pause play

In playing mode, press button on remote control, or touchbutton on display to pause. Press again to back to normal play.

5.Stop play

In playing mode, 1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.

2) Press button on remote control twice to enter into stop mode, here, press button on remote control or touch button on display, unit will play from the first song.

6.OSD

In playing mode, short press OSD on remote control to show all information of present disk.

7. Randomly play

In CD mode, press LOC/RDM button on remote control, to instantly play each song. Press again to back to the normal play.

8. EQ mode

1) This function can only be worked by remote control.

2) When playing CD/MP3, press the “ZOOM” button on the remote control, you can choose the sound mode.

9.EJ

Press EJ button on panel to eject disc3) When enter this function, press the button / / / to move the course to select sound mode which in the system menu, after your

selection position will show red color to indicate the confirmation.

POWER ON/OFF

MUTE

TIME DISPLAY

SOURCE

SEEK+/SEEK-

VOL+/VOL-

SEL

LOUD

BAND/P/N

LOC/RDM

STOP

PLAY/PAUSE

ST/PROG

0-10+

AMS/RPT

TITLE

AUDIO

SET PLAYING TIME

SUBTITLE

PBC/MENU

UP/DOWN / L / ENTER

SLOW

ANGLE

SET UP

OSD

ZOOM

1.POWER

Press once to switch on, press again to switch off.

2.MUTE button

Press once to turn off audio output, press again to resume volume level.

3.DSP

Press this button to show the time.

4.SOURCE button

Press this button to choose audio sources.

5.EQ button

Press this button to choose POP, ROCK, EQ off.

6.SEEK + ( ) / SEEK ( ) button

Press this button to manual turning, speed or quick back, previous song and next song.

7.VOL + ( → ) / VOL - ( ← )

Press this button to increase or decrease volume level.

8.SEL button

Press this button to choose sound feature.

9.LOUD button

Press this button to startup LOUD function.

10.BAND/P/N button

In radio mode, press this button to choose band. In VCD, DVD mode, press this button to choose AUTO, PAL or NTSC system.

11.LOC / RDM button

In radio mode, press this button to switch between local and direction. In VCD, CD mode, press this key to randomly play.

12.STOP button

Press this button to stop playing.

13.PLAY /PAUSE button

Press this button to switch between play and pause. In stop mode, press this button to play.

14.ST/ PROG button

In radio mode, press this button to choose stereo or mono station. In audio mode, it can help STOP button to programmed play.

1336

Page 16

15.0 - 10 + button

Press this button to choose desired song, section, preset stations. * Decimal numbers, for example the 19

song, press 1,9 button; * Centesimal numbers, for example, the

120 song, press 1,2,0 button.

16.AMS / RPT button

In radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly.

17.TITLE button

In DVD mode, press this button to play back to the top menu of disk.

24.ANGLE button

In DVD mode, press this button to change play angle.

25.SETUP button

In audio mode, press this button to choose different set items.

26.OSD display

Press this button to display the title chapter and the left time.

27.ZOOM button

In DVD/VCD mode, press this button to ZOOM in. In CD/MP3/USB/SD mode, press this button to choose EQ.

15. PBC (MENU) play

In VCD mode, press this button then play the PBC and display will show whole menu in disk, work with number button to choose song. When you are playing either song of the PBC, and you want to stop to select another song, press the button to turn off. Note:

1) This function can be worked by the control.

2) PBC is suitable for the SVCD and VCD 2.0 disc.

3) In PBC mode, you can not press number button only to choose song.

16. VCD program playing

In VCD mode, you can set playing sequence of songs by program play function. The program playing operation steps are as follows: In VCD mode, press ST/PTOG button, display will show;

PROGRAM

18.AUDIO button

In DVD mode, press this button to switch language of dialogue. In VCD mode, press this button to choose left track, tight track, and stereo.

19.SET playing time

In DVD mode, press this button, you can define playing time.

20.SUBTITLE button

In DVD mode, press this button to switch language of subtitle.

21.PBC button

In VCD mode, press this button to display all song menu, work with number button to choose songs.

22.UP, DOWN, LEFT, RIGHT, ENTER button

In DVD mode, press this button to move cursor up, down, left, right to choose item in menu. Press enter button to confirm choice.

23.SLOW button

In audio mode, press this button to slow backward and slow forward.

28.MENU button

Press button to back to the main menu.

BATTERY CHANGE

When control distance of remote control become shorter or no function, please change

battery. Please confirm polarity before change.

Put battery into controller.

Insert battery holder into controller.

PLAY DELETE

Input the songs which you want to programmed by the number buttons on remote control. Fr example: Program the first song, input your desires song, for example, the fourth song, and press number button 4 on the remote control. Program the second song, press button move the cursor to 2 . Input your desired song, for example, the eighth song, press number button 8 on the remote control. Press button to program play. Back to the normal mode, press the ST/PROG button, then press button. Note: This function can only be worked by the remote control.

Page 17

8. OSD

In playing mode, short press OSD on remote control to show all information of present disc.

9.Number button

In VCD mode, press 0-9 number button to input song. For example, you want to choose

th th

13 song, press 10+ button, and then press 3 button once to play 13 song. Note: This function can only be worked by the remote control.

10. Repeatedly play

In playing mode, press AMS/RPT button on remote control, to startup following, repeat function. Single song repeat→ Repeat play off. Note:

1) When playing VCD disc, if PBC is on, no repeat function.

2) After unit is power off or mode is switched to other playing mode except VCD mode, if you switch back to VCD mode, repeat playing will be cancelled.

11. Randomly play

In VCD mode, press LOC/RDM button on remote control, to instantly play each song. Press again to back to the normal play. Note: When VCD disk, if PBC is on, RDM will not work.

12.Scan play

In playing mode, instantly play each song for 15 seconds to scan your desired song.

1) Press 3/INT touch button on display to scan and play from the first song.

2) When heard you desired song, press those button to cancel scan playing, back to normal playing.

13.Switch Track

In VCD mode, press AUDIO button on remote control to switch track as following sequence: Links → Rechts → Stereo →Links

14 EJ

Press EJ button on panel to eject disc.

This white bar shows the rate of process of loading a disc.

Note: When loading a disc, touch screen function can not be used.

Page 18

DISC PLAY TOUCH OPERATION

Touch this area to enter & exit main menu.

At MP3 playing state, press this button can move the cursor to left/right/up/down and select the songs which in the system menu

At DVD state, press this area, it will appear touch functions icon

VCD BASIC OPERATION

Slot in VCD disc, unit will play it automatically. If disc is in slot, press DVD touch button on main menu can to play.

1.Pause play

In playing mode, press button on remote control, or touchbutton on display to pause. Press again to back to normal play.

2.Stop play

2) Press button on remote control twice to enter into stop mode, here, press button on remote control or touch button on display, unit will play from the first song.

3.Speed forward / backward play

In playing mode, press SEEK + button on remote control, or touch button on display to speed play. When you need quick back, press SEEK - button on remote control, or touch button on display to quick back play. Note: Hold above button a bit longer to operate.

4.Previous / next song play

In playing mode, press SEEK + / SEEK - on remote control, or / touch button on display to choose previous/next song.

5.Switch system

In playing mode, short press the BAND/P/N button on remote control, to select PAL, AUTO, NTSC TV system. Note: This function can only be worked by the remote control.

Touch option:

next song; previous songs; adjust monitor angles;

Pls refer to Pic 5 when touch “SET” button; There is a yellow remind when touch any button.

You can select “X →X →X →X →X → ” to speed up when you press this

Play

button .You can select “X →X →X →X →X → ”to backward when you

16 20 Play

press this button .

2 4 8 16 20

2 4 8

6.Slow play

Press SLOW button on remote control to slow play. The level of slow playing is as follows. Sequence is :

SLOW 1/2 →SLOW 1/3 →SLOW 1/4 → SLOW1/5

PLAY ← SLOW 1/7 ← SLOW1/6

Note: This function can only be worked by the remote control.

7.Zoom in / Zoom out

Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are as follows:

ZOOM IN 2 →ZOOM IN 3 →ZOOM IN 4 →ZOOM IN 1/2

ZOOM IN OFF ←ZOOM IN 1/4 ←ZOOM IN 1/3

Note:

1. This function can only be worked by the remote control.

2. Image which is zoomed in can be moved by up/down/left/right cursor to move.

3. Image which is zoomed out cannot be moved.

Page 19

DIGITAL SETUP

DVD MODE

OP MODE:How to setup op mode rorm.

(1.Press or button

DIGITAL SETUP

OP MODE DYNAMIC RANGE DUAL MONO

EXIT SETUP

DYNAMIC RANGE:How to setup dynamic bound form.

(1.Press or button

DIGITAL SETUP

OP MODE DYNAMIC RANGE DUAL MONO

EXIT SETUP

(2.Press or / / button, Then

to enter.

DIGITAL SETUP

OP MODE DYNAMIC RANGE DUAL MONO

EXIT SETUP

LINE OUT RF REMOD

(2.Press or / / button, Then

to enter.

DIGITAL SETUP

OP MODE DYNAMIC RANGE DUAL MONO

EXIT SETUP

AUDIO SETTING ON TOUCH SCREEN

Audio selection: VOL →BAS →TRE →BAL→FAD

When using this function, the position will have a groove for nothing.

EQ mode: Touch the button everytime from

ROCK POP

OFF ROCK

The best listening position choosing

DUAL MONO:How to setup dual mono.

(1.Press or button

DIGITAL SETUP

OP MODE DYNAMIC RANGE DUAL MONO

EXIT SETUP

(2.Press or / / button, Then

to enter.

DIGITAL SETUP

OP MODE DYNAMIC RANGE DUAL MONO

EXIT SETUP

STEREO MONO L MONO R MIX MONO

Loud choosing: this function is defined open, when it is touched at the first time, the loud function will be closed, at the same time, yellow light disappear.

Bass choosing: when touched the button will be yellow, touch this button to exit, touch it again to resume..

Page 20

VIDEO SETTING ON TOUCH SCREEN

SATURATION:How to setup saturation form.

(1.Press or button

(2.Press or / / button, Then

to enter.

Video mode: When using this function, the position will have a groove for nohing.

You can choose: Brightness, contrastness, color, sharpness, adjust the image effect according to your favor, at the same time, there will be blue light for noting.

Image mode: You can choose the area in the broken line on the panel, standard, defined, soft, accord what you meed to choose, when choosing the function, the bule backsight will disappear.

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

EXIT SETUP

SHARPNESS:How to setup sharpness form.

(1.Press or button

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

EXIT SETUP

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

EXIT SETUP

(2.Press or / / button, Then

to enter.

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

EXIT SETUP

Page 21

BRIGHTNESS:How to setup brightness form.

(1.Press or button

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

(2.Press or / / button, Then

to enter.

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

RDS USER OPERATION

Touch this area to enter & exit main menu

EXIT SETUP

CONTRAST:How to setup contrast form.

(1.Press or button

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

EXIT SETUP

HUE:How to setup hue form.

(1.Press or button

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

EXIT SETUP

(2.Press or / / button, Then

to enter.

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

EXIT SETUP

(2.Press or / / button, Then

to enter.

VIDEO SETUP

BRICHTNESS CONTRAST HUE SATURATION SHARPNESS

Press this button to close sound output, re-press this button to resume sound.

Press this button each time, it will automatically execute the following operation in an order of FM1 → FM2 → FM3 → AM1 → Am2

In the radio state, press “APS” button, it will automatically seek radio channels in the whole band and preset the strongest radio channels.

Short press on this button to decrease radio frequency; longer press on this button to seek radio channels frequency decreased direction.

Short press on this button to increase radio frequency; longer press on thisbutton to seek radio channels frequency increased direction.

Press this button to adjust angles of the monitor.

Press TA, when TA is on, it means the unit is automatically track RDS radio channels.

Press PTY, when PTY is on, it means there is strong RDS signals output.

Press this button to choose radio channels' name, please refer to details user manual.

Press “SEL” to adjust other functions, please refer to pic 3.

EXIT SETUP

For details of RDS operation, please refer to other instruction

Page 22

RDS

1.EON (RDS Mark)

Indicate main unit is on auto tracking RDS mode.

2.AF (RDS Auto Tracking Mark)

Indicate radio is auto tracking RDS channel.

3.TA (RDS Signal Increasing Output)

Indicate RDS channel have signal increasing output.

4.TP (RDS Channel Stereo Mark)

Indicate RDS channel is on stereo playing mode.

5.POP.M (RDS Channel Mark)

Indicate RDS channel name.

I.RDS Tracking System Press AF button in FM mode, and then press / last 2 minutes, RDS will auto search channel up and down, it will stop searching when RDS channel be founded, but “AF” will keep remaining on the screen and waits for the next traffic emergency report.

MENU LA NG: How t o setup menu l ang f orm .

(1.Press or button

LANGUAGE SETUP

OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG

EXIT XETUP

FREQUENCY SETUP

NUMBER EXPORT:How to setup number export form.

(1.Press or button

(2.Press or / / button, Then

to enter.

LANGUAGE SETUP

OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG

EXIT XETUP

KOREAN ENGLISH GERMAN SPANISH FRENCH PORTUGUESE LATIN JAPAN

(2.Press or / / button, Then

to enter.

II.RDS Tracking on Playing Mode In playing mode, “AF” tracking system keeps on opening and waits for traffic emergency report.

1)PTY: RDS button, press once will show music mode POP, press 1-6 function memory button, every group have 2 channel. POP M ROCK M EASY M LIGHT M CLASSICS M OTHER M JAZZ COUNTRY NATION

2)Press PTY button twice and then press 1-6 function memory button, every button have 3 channel. NEWS AFFAIRS INFORMATION SPORT EDUCATION DRAMA CULTURE SCIENCE CHILDREN SOCIETT TELIGION PHONING TRAVEL

Note: RDS channel in broken line is available. AF: RDS auto search button, in radio mode also can press this button shortly auto tracking RDS channel, press this button shortly can cancel RDS function. TA: In RDS mode, press this button can output TA signal, and check RDS channel is exist or not, if no RDS signal TFT will show “NO. TA. TP”.

FREQUENCY SETUP

NUMBER EXPORT TONALITY

EXIT XETUP

TONAL ITY:How to setup tonality form.

(1.Press or button

FREQUENCY SETUP

NUMBER EXPORT TONALITY

EXIT XETUP

FREQUENCY SETUP

NUMBER EXPORT TONALITY

EXIT XETUP

OFF SOUND CODE PCM

(2.Press or / / button, Then

to enter.

FREQUENCY SETUP

NUMBER EXPORT TONALITY

EXIT XETUP

20 29

Page 23

LANGUAGE SETUP

RADIO OPERATION

OSD LANGUAGE:How to setup osd language form.

(1.Press or button

LANGUAGE SETUP

OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG

EXIT XETUP

AUDIO LANG:How to setup audio lang form.

(1.Press or button

LANGUAGE SETUP

OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG

EXIT XETUP

SUBTITLE LANG:How to setup subtitle lang form.

(1.Press or button

LANGUAGE SETUP

OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG

EXIT XETUP

(2.Press or / / button, Then

to enter.

LANGUAGE SETUP

OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG

EXIT XETUP

KOREAN ENGLISH GERMAN SPANISH FRENCH PORTUGUESE LATIN JAPAN

(2.Press or / / button, Then

to enter.

LANGUAGE SETUP

OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG

EXIT XETUP

KOREAN ENGLISH GERMAN SPANISH FRENCH PORTUGUESE LATIN JAPAN

(2.Press or / / button, Then

to enter.

LANGUAGE SETUP

OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG

EXIT XETUP

KOREAN ENGLISH GERMAN SPANISH FRENCH PORTUGUESE LATIN JAPAN

1.Band selection

In radio mode, press BAND button, BAND/P/N button on remote control, or touch position of switch bank position every time to choose band, the sequence is as follows:

Fm1 Fm2 Fm3 Am1

Fm1

2.Adjust frequency Manually adjust frequency:

Press SEEK + button on remote control, or touch button on display shortly every time, frequency will increase one step by one step till you get desired frequency. Press SEEK button on remote control, or touch button on display shortly every time, frequency will decrease on step by step till you get desired frequency.

Search station:

Press SEEK + / SEEK - button on remote control, or / touch button on display shortly every time to search station in up/down direction. When get one station, it will auto stop searching.

3.Browse / Auto search and store station

1)In radio mode, press AMS/RPT button on remote control, or APS button on display shortly to browse preset station on 1-6;

2)In radio mode, press AMS/RPT button on remote control, or APS button on display longer to auto search in whole band from present frequency and store 6 most strong frequency on 1-6;

3)This unit has FM1, FM2, FM3, AM1, AM2 band, Each band can preset 6 stations, total 30preset stations.

Note: After preset station, unit will cancel the former preset stations.

4.Mono/Stereo Selection

In radio mode, press ST/PTOG button on remote control or ST touch position on display to choose mono/stereo program. Note: In radio mode, start up the stereo function automatic, touch the ST button again on the display, the TFT display will show the ST OFF & MOMO mark, that is to turn off the stereo. When the right under foot appear the MONO mark, it show the MONO on.

5.Manual preset and store station

In radio mode, press 1-6 button on remote control, or 1-6 position on display longer to store preset frequency into preset channel. For example, the present frequency is

89.8MHz, press 2 button longer, then 89.8MHz frequency is stored in 2 channel.

Page 24

DVD BASIC OPERATION

Slot in DVD disc, unit will play it automatically. If disc is in slot, press DVD touch button on main menu can to play.

1.Pause play

In playing mode, press button on remote control, or touchbutton on display to pause. Press again to back to normal play.

2.Stop play

2) Press button on remote control twice to enter into stop mode, here, press button on remote control or touch button on display, unit will play from the first song.

3.Speed forward / backward play

4.Previous / next song play

In playing mode, press SEEK + / SEEK - on remote control, or / touch button on display to choose previous/next song.

5.Switch system

In playing mode, short press the BAND/P/N button on remote control, to select PAL, AUTO, NTSC TV system. Note: This function can only be worked by the remote control.

PASSWORD:How to setup password form.

(1.Press or button

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

RATING:How to setup ratubg form.

(1.Press or button

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

(2.Press or / / button, Then

to enter,Password:0000

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

Note:

1.Affer input code,Dress ENTER button to tum on child lock.

2.Move cursor to level itern,Choose desired level.

3.You only can choose level at unlock state.

(2.Press or / / button, Then

to enter.

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

1 KID SAFE 2 G 3 PG 4 PG13 5 PG-R 6 R 7 NC-17 8 ADULT

6.Slow play

Press SLOW button on remote control to slow play. The level of slow playing is as follows. Sequence is : SLOW 1/2 →SLOW 1/3 →SLOW 1/4 → SLOW1/5

PLAY ← SLOW 1/7 ← SLOW1/6

7.Zoom in / Zoom out

Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are as follows:

ZOOM IN 2 → ZOOM IN 3 → ZOOM IN 4 → ZOOM IN ½

ZOOM IN OFF ←ZOOM IN 1/4 ←ZOOM IN 1/3 Note:

DEFAULF:How to setup defaulf form.

(1.Press or button

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

(2.Press or / / button, Then

to enter.

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

RESTORE

1. This function can only be worked by the remote control.

2. Image which is zoomed in can be moved by up/down/left/right cursor to move.

EXIT SETUP

3. Image which is zoomed out cannot be moved.

22 27

Page 25

SYSTEM SETUP

8.OSD

In playing mode, short press OSD on remote control to show all information of present disc.

TV SYSTEM:How tosetup tv system form.

(1.Press or button

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

VIDEO :H ow to set up vide o form.

(1.Press or button

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

(2.Press or / / button, Then

to enter.

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

NTSC PAL AUTO

(2.Press or / / button, Then

to enter.

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

VIDEOFREQUENCY HEFT TV-RGB P-SCAN YPBPR S-VIDEO

9.Repeatedly play

In play mode, press AMS/RPT button on remote control to start up follow repeat function.

Repeat(chapter)→Repeat(section)→Repeat(off)

10.Angle switch

If the DVD disc is recorded with multi-angles, you can press the ANGLE button to switch the angle during playing. The sequence is as follow: ANGLE 1 → ANGLE 2 → ANGLE 3

Note:

1. It just can be worked by the remote control.

2. It is only for the DVD disc which has multi-angle.

3. If there is a sign on the cover of the DVD disc. The number in the sign means how many angles the disc has.

4. You can not switch the angle when slow playing.

11.Multi-audio

There are different languages of dialogue and audio systems in DVD disc. If the DVD disc is recorded with multi-audio, you can switch the language of dialogue and the audio systems when playing. Press the AUDIO button repeatedly to change the language of dialogue. Note

1. It just can be worked by the remote control.

2. It is only for the DVD disc which has multi-language.

3. If there is a sign on the cover of the DVD disc, means that it was recorded by multi-language/audio system.

4. In VCD mode, press the AUDIO button to select the L/R or STEREO track.

TV TYPE:H ow t o etup tv typ e fo rm.

(1.Press or button

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

(2.Press or / / button, Then

to enter.

SYSTEM SETUP

TV SYSTEM VIDEO TV TYPE PASSWORD RATING DEFAULT

EXIT SETUP

4:3PS 4: 3LB 16:9

12.Multi-subtitle

If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle. Press the sub-t button repeatedly to change the language. Note:

1. It just can be worked by the remote control.

2. It only for the DVD disc which is recorded with multi-wubtitle.

3. If there is a sign on the cover of the DVD disc means theat it has several subtitle.

13. Title select

In DVD mode, press TITLE button to back to the title menu. Display shows all the titles of the disc. You can select the chapter you want by the cursor, press play button to play the chapter. Note: It just can be worked by the remote control.

Page 26

14. MENU select

In playing mode, press PBC button on remote control to back to the menu, display will show chapter and section in disc. Work with / button on remote control or touch button on display to choose your desired song. Press EJ button / ENTER button to play. Note: This function can only be worked by the remote control. OPEN: Press EJ button on panel to eject disc.

15. Program play

In DVD mode, you can set the sequence of playing by the program function, the operation is as follow:

PROGRAM

T C

T C T C T C

PLAY CHEAN

When DVD is playing, press ST / PROG button, then display shows: For example, program the first song, input 01, press button move the cursor to the second lattice, input desired song, for example, the third song. Program the second song, press button, move the cursor to 2 . input 01, press button move the cursor to the second lattice, input desired song, for example, the 6 song (press 6).

Press button to program play. Back to the normal mode, press the ST/PROG button, then press button.

Note: This function can only be worked by the remote control.

17. Set up

Press SET UP button, display will show the system set up menu and the submenu, select the item you want by , after selecting the proper item, press / / / to press ENTER to confirm. Note:

1. It just can be worked by the remote control.

2. Some function setting maybe different because of the different model or disc.

3. If the selected language is not recorded in the disc, then unit will show the appointed language,

4. About the “SET UP”, please read the follow. Press “SET UP” on the remote control, it will appear the following touch menu:

16. Digital album

Play the disc contains JPEG pictures, read the picture menu first.

1. Press button on remote control, the pictures will be browsed automatically. (It also can be worked to press number 6 button on the unit.)

2. Press ENTER button on the remote control, it can be manual browsed by SEEK +and SEEK -.

3. ZOOM in picture function: During auto browsing, press pause button stop the screen, press ZOOM button to zoom in or zoom out the picture. During manual browsing, you can press ZOOM button to zoom in or zoom out picture directly.

4.Under zoom in picture, you can move the picture by .

Note: You can not move picture in normal mode and zoom out mode.