Eonon D2102 Instruction Manual

Model:D2102

User Manual

Please read this manual before using and

www.eonon.com

save this manual for future reference.

CONTENTS

Acknowledgements.

Warning.
I. Precautions
II. Functions and Features

Display Screen.

Disc Play

USB & SD Card Player.

Radio Tuner

TV Tuner

AUX Input/ Output and Other

Satellite Navigation.

Bluetooth

iPod Function
III. Basic Operations

/

Startup Shutdown

Play Source Selection.. Mute

/

Control

Mute Black Screen

Play

Melody Mode Selection

And Control (SEL)
IV. Operation system setting
V. Touch Screen Calibration
VI. Keying Operation

Panel Key Operation
Remote Controller Operation

VII. Radio Tuner.

Entry into Radio Tuner.
Touch Screen Operation
Interface of Radio tumer

Wave Band Selection.

Auto Search.
Fine Tuning &Semi-automatic
Search
Manual Default Frequency

Memory

Call Out Preset Memory
Frequency

VIII. TV play

Entry into TV Play

1
1
2
3
3
3
3
3
3
3
4
4
4
4
4
4

5

5
5
6
7
7
8
10

10

10
11
11

11

11

12
12
12

Touch Screen Operation
Interface

Channel Switch
Auto Search.
Semi-automatic Search
S-System Switch.
Sound System Switch
IX.Disc Play.
Entry into Disc PlayScreen
Operation Interface
Function menu

XI.

Disc Change
Breakpoint Memory Play
Pause/ Play.
Pre-stop/ Stop
Fast Forward/ Fast Back
Slow Play
Repeat Playback
Random Play
Digital Music Locate Play
Multi-title Play
Multi-angle Play
PBC Menu Play
Title Play
Zoom-in & Zoom-out Image
Play
Programme Play
E-album

X. SD Card & USB Play

Entry into SD Card & USB Play
SD Card & USB Play Interface
SD Card & USB Screen

Operation Interfac

XI. DVD Setting

System Setting.
Language Setting.
Audio Setting.
Video Setting
Loud speaker Setting.

12
13

13
13
13
13
13

14
15
16
16
16
16
16
16
16
16
17
17
17
17
17

17
17
18
18
18
18

1

19
19
20
21
21
22

9

XX. Packing List

CONTENTS

Packing List

Item

1

2

3

4

5

6

7

8

9

10

11

12

13

Name

Remote Control

Istall Holders and Screws

Power Cable

USB Cable

iPod Cable

Steering Wheel Press-key extention cable

Manual

TV Antenna

AV wire harness

KEY+USB+CAM wire harness

GPS Antenna

TV Switch cable

RCE Switch Cable

Quantity Remark

1

1

Optional

1

1

1

Optional

1

1

1

Optional

1

1

1

1

1

Optional

Optional

Dolby Digital Setting

XII. Bluetooth

Screen Operation Interface

XIII. AUX Functions

Entry into AUX play
AUX Screen Operation

Interface

XIV. iPod Functions

Entry into iPod play
iPod Screen Operation
Interface.

XV . Backing Rear View Function

22
23
23
24
24

24
24
24

24
25

Rear View Mirror(Backing Rear
View Mirror)
Rear View Mirror Image Function

XVI. Steering Wheel Control Button

Operation
XVII.Remote Control Operation
XVIII.Troubleshooting
XIX. Connector Diagram

Precautions
Connector Diagram

XX. Packing List

Safety tips

◆◆For the sake of safety, do not watch the video image or operate the unit in

driving, which is prohibited by the law in some countries.

This system only functions as an assistance while backing. The company

will bear no liability for any accident occurred during backing.

25

25

26
27
28
29

29
30
31

31

Acknowledgements

Thank you very much for purchasing our digital car audio-visual product! Plead

read through this manual carefully before use and keep it well for future reference.

Warning

1. Do not expose the unit in damp environment to prevent from fire or electric
shock.

2. This unit contains danagerous high voltage accessories, so please do not
remove the cover of the unit.

3. Any change or modification to this unit without the clear prior consent of the
authorization party may bring inconvenience to the users.

4. Keep the disc tray clean and wipe it with clean soft cloth in case of dust to
prevent from affecting play effect or slow disc entrance/ exit or no disc
response. If such problems occur, you need professionals to help clean,
which is obviously inconvenient.

5. Play the disc for too long or with a large volume will shorten the service life
of this product. To better protect the product, please use together with a radio
and with moderate volume level if you keep using it for a long time.

6. The unit comprisess of high precision parts, so please do not disassemble it
or tamper with internal parts by yourself.

7. Do not touch the screen with hard object.

Connector Diagram:

Note: All specifications are subject to change without prior notice for further
improvement of the product.

Category 1
laser product

1

30

XIX. Connector Diagram

Precautions:

◆

This unit is designed for negative ground 12V vehicle systems. Please install
proper dropping equipment if it is used in trucks, buses or coaches with 24V
systems.

◆

Disconnect the negative terminal of the battery before installation to prevent from
short circuit.

◆

Place the wire in fixable place to avoid contacting any mobile parts such as
handbrake and gear level. Do not place the wire in such hot areas as vicinity of
heat outlet to avoid short circuit arising from fusion or abrasion of wire insulating
layer.

◆

Use required 10V fuse only when replacing. Use of high-capacity fuse or not use
of fuse may cause damage to the electric wire and lead to short circuit.

◆

Do not lead the yellow wire through the mounting hole and into engine cabinet

before installing battery, otherwise, it may cause damage to the electric wire and
lead to short circuit.

◆

Do not apply the wire of other equipments to this unit, otherwise, it may cause
overloading and lead to overheating.

◆

Make sure to wrap the unused speaker lead wire with insulating tape to avoid
short circuit.

Make sure to insulate the exposed electric wires and well pack all wires to prevent

◆

connecting terminal from contacting metal parts of the unit so as to avoid short
circuit.

If ACC position is unavailable to auto ignition system, please connect the ignition

◆

lead to the “ON/ OFF” power supply with ignition switch key.

After power-on, the external amplifier control signals will be output through

◆

AMP.CONT lead. If external amplifier is connected, please do not connect
AMP.CONT lead to amplifier power port to avoid electric leakage and fault.

The output terminal of the loud speaker is forbidden to be grounded, otherwise, it

◆

may cause damage to the amplifier. Please avoid using 3 line type loud speaker
system with shared ground wire and connecting the speaker wire to the car body.

The loudspeaker connected to the unit must be of high power, and its minimum

◆

rated voltage is 50w and resistance value is 4 . Do not connect directly the leads
of several loud speakers or use loud speaker with resistance value beyond the
limited scope, otherwise, it may lead to short circuit and cause damage to the loud
speaker.

Ω

I. Precautions

● This unit is applied to the following discs:

Logo

It is applied to MP4 discs saved in the form of .avi, .dat.

It is applied to all functions of DVD VIDEO, DVD-R/ DVD­RW or DVD+R/ DVD+RW under video mode.

It is applied to all functions of video CD or CD-R/ CD-RW under
video CD mode.

It is applied to all functions of music CD or CD-R/ CD-RW
under music CD mode.

It is applied to all functions of files saved in
CD-ROM/ CD-R/ CD-RW/ DVD-R/ DVD-RW/

It is applied to all functions of files saved in CD-ROM/
CD-R/ CD-RW/ DVD-R/ DVD-RW/ DVD+R/ DVD+RW in

●

Notes: Mp4/ DVD/ VCD 1.0/ 1.1/ 2.0/ 3.0 versions, DVD, CD-R/ CD-RM/ MP3/ WMA/

●

Do not alter the unit yourself to avoid accident.

●

Playing disc in bumpy drive or playing non-standard or seriously damaged

JPEG/WMV/ MTV/ AVI/ MPG format discs are supported.

●

When playing DVD, VCD, MP3 or CD, the display screen will automatically
identify the disc and display corresponding samples. If the screen displays
“invalid”, it shows such function is unavailable under this mode, please select
another function. Refer to the instructions for specific operation.

Indications

disc can cause damage to the laser head.

●

Clean the laser head with laser head cleaning agent on a regular basis to

prevent from dust conglomeration.

●

Do not use the unit under a too high or too low temperature. Please make sure

that the temperature in car is between -20 ~+60 before power-on.

●

If the screen displays the icon of while operating, it shows that this

℃℃

operation is not supported or is invalid.

●

In case of abnormal phenomenon, please refer to the part of

“Troubleshooting” of this manual. You may also press the “RES” button to
restore factory defaults.

Disc size

12cm

1

2cm

12cm

12cm

12cm

12cm

29

2

Display Screen

◆ True color TFT-LCD

◆ Touch operation is supported.

Disc Play

◆

Such formats as DVD-R, DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW,CD-DA,
MP3, WMA, SVCD, VCD, MPEG1, MPEG2, MPEG4, JPEG are supported.

Breakpoint information memory function.

◆

Multi-language, multi-title, multi-angle play. Parental lock (V-chip) function.

◆

Fast forward/ Fast back play 2, 4, 8, 20; slow forward play 1/2 1/3 1/4 1/5 1/6

◆

1/7.
Pause, repeat play, random play, stop. GOTO search, digital music locate, PCB

◆

function, play message display.

XVIII. Troubleshooting

Phenomenon Cause Solution

Replace the burned fuse with a new one of
the same capacity.

Press “RES” button to restart the unit.

Reconnect it.

Replace with new batteries of the same
specification.

The power fails to get
through.

The information set
before completely loss
after power on/off

The remote control
fails to work

The fuse has burned down.

Maloperation of micro-processor
caused by other factors

Wrong connection of positive
wire BATT of ignition wire
ACC

The battery power is exhausted.

USB & SD Card Player

◆◆Such formats as MP3, WMA, WAV, ASF, AVI, MP4, MPEG1, MPEG2, MPEG4,

JPEG are supported.
SD and USB (2.0) port are supported.

Radio Tuner

◆◆30 station memories (FM: 18; AM: 12)

Auto search, semi-automatic search, manual search, preset memory stations.

TV Tuner

◆◆Auto/ Manual station preserving

Full system TV

AUX Input/ Output and Other Functions

One channel: AUX input

◆

One channel: backing rear view mirror input

◆

4-channel amplifier output. Loud speaker can be directly connected.

◆

4+1 channel audio output.

◆

Auto backing rear view mirror.

◆

Full-function infrared remote control and touch function.

◆

Big radio noise or no
program available

The disc can not be put in.

The disc can not be played.

Language/ Title switch is
unavailable.

No image

Malposition of touch screen

The antenna is not installed in a
correct position or the cable of
the antenna is of poor contact.

There is already one disc
in the unit.

Disc is scratched.

The front and back sides are put
upside down.

The laser head are dirty.

Only one language and one type
oftitle are available.

The video cable is not connected
properly.

The touch screen is not properly
calibrated.

Check the connection of radio auto antenna

control line ANT. Re-check the connection

of antenna and ground wire.

Press the button to pop out the disc inside
and insert the new one.

Change a fine disc.

Re-place the disc with disc logo up.

To clean it with laser head cleansing disc.

Language/ title switch is unavailable for
disc with only one language and one type
of title.

Re-connect it.

Re-calibrate the touch screen
(refer to Page 6)

3

28