Eonon D1301 Instruction Manual

D1301

Front Rear Audio Video

Sys

Exit

Model:D1301

Thank you for buying this product, please read through these operating instructions,
so you will know how to operate your model properly. after you have finished reading
the instructions, put them away in a safe place for future reference .

CONTENTS

PRECAUTIONS

FRONT PANEL

SYSTEM MENU

REMOTE CONTROL

BASIC OPERATION

RADIO OPERATION

BLUETOOTH OPERATION

TV OPERATION

3

5

7

16

20

21

24

27

DVD/VCD/CD OPERATION 28

SYSTEM SETUP

MP3 OPERATION

31

36

IPOD OPERATION 38

INSTALLATION

TROUBLE SHOOTING

CABLE CONNECTION

39

41

43

ACCESSORIES

SPECIFICATION

IMPORTANT: Please adjust screen to make the touching effect function best when
you initiate the unit for the first time.
For the details, please refer to the operation at Page 15.

NOTE: Due to the continuous product improvement, specifications and design are
subject to change without prior notice.

43

44

3

PRECAUTIONS

Notes on Installation

The unit is designed for 12VDC,negative ground operation system only.
Before installing the unit, make sure your vehicle is connected to DC12V
negative ground system.

Be sure to connect the color coded leads according to the diagram.Incorrect
connections may cause the unit to malfunction or damage the vehicle s

,

electrical system.

Be sure to connect the speaker (-) leads to the speaker (-) terminal.

Never connect the left and right channel speaker cables each other or to the
vehicle body.

Make sure all the connections are completely correct before turning on your unit.
When replacing the fuse(s), the re-placement must be of the same amperage
as shown on the fuse holder.

Do not block vents or radiator panels. Blocking them will causeheat to build up
inside and mayresult in fire.

After completing the installation and beginning to play the unit (including replacing
the battery),please remove the guard against theft front-panel at first, and then
press RESET button on the base with pointed object (such as ball-point pen) to
set the unit to initial status.

IMPORTANT: Please adjust screen to make the touching effect function best
when you initiate the unit for the first time.

(For the details, please refer to the operation at Page 15.)

4

PRECAUTIONS

This unit can play the following discs only:

F

Type of disc

DVD

VCD

Label on the disc

TM

VIDEO

Recorded material

Sound and moving
pictures

Sound and moving
pictures

Size of disc

12cm

12cm

CD

MP3

NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.

Sound only

Sound only

12cm

12cm

*Do not attempt to modify the unit, modifying the unit may cause an accident.

*Stop the vehicle before carrying out any operation that could interfere with your driving.

*Do not work in extremely high or low temperature. Be sure the temperature inside the
vehicle is between +60 C and -10 C before turning on your unit .

*To enjoy optimum sound and images while playing, handle the discs as follows:

Handle the disc by its edge to keep the disc clean, and do not touch the surface.

Do not use your CDs with paste residue or ink attached.

Do not use CDs with labels or stickers attached, which may leave a sticky residue

while beginning to peel off. (Shown as the picture)

Clean the discs with an optional cleaning cloth. Wipe each disc from the center out.

(Shown as the picture)

5

FRONT PANEL

15

16

1

2

14

PTY AF OPEN

REL

VOL

DN

UP

3

BAND/

4

MUTE

POWER

SRC

5

6

A/V IN

7

A/V IN

DISP

8

MIC

TA

17

13

12

11

IR

10

9

IR

TILT

MENU

191818

6

FRONT PANEL

1.REL:Press to open the guardagainst theft front-panel.

2.VOL:Rotate VOL button clock wiseto increase the volume level; and rotate VOL

button anticlockwise to decreasethe volume level.

Press the button to select one of the audio control:L-front/R-front/L-rear/R-rear/Subwoof

/Bass/Middle/Treble/TILT/Volume.

Rotate the button to adjust the selecteditem

3. / / / :In radio mode, long press switches to manual seek station .

Short press switches to automatic.

In playback mode, short press to select previous or next track or chapter.

Long press will perform fast reverse or fast forward.

4. /BAND: Press to pause or play playback mode.

In radio mode, press to change current band.

5.SRC: Press to switch sources.

6.POWER/MUTE:Press to turn on the unit, press and hold the button for 1 second or longer to

turn off the unit. In power on, press to shut off the sound output, press it again to resume

previous sound.

7.A/V IN: Insert the A/V cord, then press PWR/SRC button to selectAUX1 source.

8.SD slot: Insert SD card, the unit will play the files of SD card automatically.

NOTE: Once the SD card could not eject automatically after pressing, just pull it out manually .

9.USB slot: Insert USB device, the unit will play the files of USB automatically.

10. IR window

11. :Short press to eject a disc.

12. OPEN: Press to open or close the TFT panel.

13. DISP/AF: in radio mode, press to turn the AF function on/offpress and hold to display

the current time ,source of the front and rear display and media (Disc,USB,SD)available.

14. MIC

15. TA: In radio mode, press to turn the TA function on /off

16. PTY: press to switch PTY program type

17. RESET: press to return to the initialization

18. / (TILT):Press to set the angle of TFT panel.

19. MENU:In DVD mode, press to display DVD SETUP menu;

Long press or press in other mode to display SYSTEM SETUP menu.

7

SYSTEM MENU

The users can perform operationby touching screen directly.

Radio Operation

1

2

1: 65.00M 2: 67.10M

4: 72.50M

3

4
5

3: 70.40M

6: 65.00M5: 74.00M

65.00MHz

Page1

10

6
7

8
9

1. BACKLIGHT
Turn on /off the backlight.
(The function can be used to change the screen brightness while travelling at night)

2. SOURCE
To display the SOURCE screen

3.Station preset button
To display the preset station list
(touch one of the station preset button to recall the radio which stored on the position;
long touch to save the current frequency into the station)

4.BAND
To switch bands.

5.LOC
To select strong or weak stations reception

6.EQ
To select a preset equalizer mode.

7.LOUD
To switch LOUD control function on/off

8.PAGE 1
To switch to RDS operation page.(Refer to RDS Opetation for detail)

9.SEEK-/SEEK+
To seek a station automatically,
To seek a station manually(long touch).

10.AMS
To browse preset stations.
To search and store stations automatically(long touch).

8

RDS Operation

1.TA

1
2
3

EON:OFF REG:OFF

PTY:NONE

RT:

TA AF

PTY

Seek-

65.00MHz

PS:

PTY:

Seek+

Page2

4
5

To turn on /off TA function

2.AF
To turn on /off AF function

3.PTY
To switch RDS program type

4.Page2
To switch to radio operation page.

5.SEEK-/SEEK+
To seek a station automatically.
To seek a station manually(long touch).

EON(Enhanced Other Networks)
ON: Active the EON function, the receiver automatically tunes in the station that broadcasts

the traffic information when it occurs, After broadcasted ,the unit will automatically return
to the original source play before the traffic information broadcast began.

OFF: Deactive the EON function
REG(Regional)
ON: Active the REG function, the unit automatically keeps receiving the related RDS

station.
OFF: Deactive the REG function

Multi-- Player Operation

In DVD mode, the touching screen display as following after touching at random position.

PAUSE

STOP

PLAY

1
2
3

PREV NEXT

MENU

4
5

9

1.PLAY
To start the playback.

2.PAUSE
To pause the playback.

3.STOP
To stop playing, touch twice to stop

completely.

4.MENU
To display the DVD SETUP screen.

5.PREV/NEXT
To select previous/next chapter or tracks.

NOTE:Touching the left middle position twice to display the TITLE MENU selection screen,

touching the right middle position twice to display the ROOT MENU selection screen, ouching
the right top position to display the number keyboard. You can select chapter(track) by
pressing the touchable screen or the RC.

Bluetooth Operation

Hands-free phone Operation

1

2

3

4

5

1.

to display the Bluetooth main screen

2.

To display the phone book screen

3.

To display the Bluetooth steup screen

4.

To display the source selection screen

5.dial number list

6.
To dial a call

7.

To clear the inputted telephone number

8.
To hang up a call

9.
To transfer calling audio output mode

10

6

7

8

9

7

The phone book screen

4

1
2

3

1.

To display a telephone number list of the received calls

2.

To display a telephone number list of the

dialed calls

3.

To display a telephone number list of the received but you missed

4.

To change the list page

The Bluetooth Setup screen

1

2

5

3
4

6

7

8

1.

To connect the Bluetooth deviece

2.

to pair up the Bluetooth device.

3.

To disconnect the Bluetooth device

4.

To reset the unit if there is something wrong with the Bluetooth function.

5.
Playback/pause

6.
To stop playback

7.
To find the begin of the last or next track

8.
To adjust the volume

The touching button(from5 to 7) are available if the A2PD function is activated

8

11

TV Operation

1

TV

0: 44.25 1: 55.75

2: 63.75

3: 77.25

5: 115.25

4: 44.25

PAL-I

Ant-1 CH:0

44.25Mz

4

5

CH- CH+

2
3

AMS

Seek-

Seek+

SYS

6
7

1.channel preset button

To display the preset channel list
Touch any one of the list to watch the TV which stored on the position
Touch and hold any one of the list to stored the current channel frequency on the position

2.CH-/CH+

To switch the preset channel list downward or upward.

3.AMS
To search and store channels automatically

4.PAL-I

To switch output system

5.Ant-1

To switch the receiving antenna

6.SYS
To display the system setup screen.

7.SEEK-/SEEK+

To seek a channel automatically
To seek a channel manually(long touch)

Setup Operation

TOUCH ON THE TOP LEFT POSITION TO ENTER SOURCE INTERFACE.
The unit will return to previous mode display screen if any operation is not perform in 5 s.

12

Front Rear Audio Video

1
2
3

Sys

Exit

6
5

4

9

1.Front

To display the source selection screen.

Front Rear Audio Video

Sys

Exit

Touch the item to select source displayed on the unit screen.

2.Rear

To select a source which display on the rear monitor

Video

Sys

Exit

SYS

Exit

Front Rear Audio Video

It is unavailable in AUX or TV mode.

*
* If another monitor(rear)is connected to the unit,image/audio of the rear
monitor can be changed from the unit,so you can enjoy separate image/audio
in the rear seats.
* The unit will output corresponding source sound through REAR-VIDEO-OUT
or DUAL-AUDIO-OUT

3.Audio

Touch on the AUDIO button and the screen will display as following:

Volume

L-front

R-front

Rear

Front

Audio

In this menu, there are items of Volume, L-front,R-fornt, L-rear, R-rear , Subwoof, Bass,
Middle and Treble can be adjusted. Touch on the button to adjust each item and
touch on button to turn pages and select the item listed above.

10

13

4.Video

Press on the VIDEO button and the screen will display as following:

Bright

HUE

Contrast

Sharp

Front

Rear

Audio

Video

SYS

Exit

In this menu, there are items of Bright, Hue, Contrast, Sharp can be adjusted.
Touch on the item that need adjusted then touch on the button to adjust.

5.SYSTEM

To display the system setup screen.Refer to system setup operation for detail

6.EXIT

To return to current source screen.

SYSTEM SETUP OPERATION

Clock Adjust

Night Lum

Clock Sys

Key Beep

Touch Adjust

Local Area

Rear

Front

Front

Rear

Audio

Video

Audio

SYS

Clock Sys

Set the time display mode(12H/24H)

Key Beep

Turn on/off the sound guide function
ON:activate the sound guide mode
OFF:deactivate the sound guide mode.
The sound guide beep will not be produced when a button on the unit is pressed.

Local Area

Touch the provided option to change the radio frequency for different country.

Switch page button

Sys

Video

Exit

Exit

Bass freq

Middle freq

Treble freq

Front

Rear

Audio

Video

SYS

Exit

Touch the provided option to adjust the bass freq middle freq treble freq.

14

11