Eonon D1001 Instruction Manual

Model: D1001

WELCO ME !

Dear customer,
Thank you for you purchasing the EONON D1001 In-Car DVD/MP3/CD player with AM/FM
radio and USB/SD/MMC memroy card interface and front panel A/V Auxiliary input.

It has been designed, engineered and manufactured to bring you the highest level of
performance and quality, and will give you years of listening pleasure.

WARNING !

When Driving

• Do not watch the video program or operate this car DVD player while driving.

• Keep the volume level Iow enough to be aware of the road and traffic conditions.

When Was hin g you r Vehi cle

• Do not expose the product to water or excessive moisture. Moisture can cause electrical
shorts, fire or other damage.

When Parked

• Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the
interior a chance to cool down before starting playback.

Use the Proper Power Supply

• This product is designed to operate with a 12 volt DC negative ground battery system.

Protect the Disc Mechanism

• Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or
permanent damage due to the precise mechanism of this unit.

CLAS S 1 LASER

THIS DEVICE IS A CLASS 1 LASER PRODUCT.

PROD UCT

The device has a safety system that prevents dangerous laser rays from escaping from the
device during normal use. In order to avoid injury to the eyes, never interfere with or damage
the unit's security system.

The invisible laser beam which could cause hazardous radiation if open or the

interlocks defeated. Do not open covers and do not repair by yourself to avoid
exposure to beam directly.

All packaging and packaging materials that are no longer required should be
recycled.

At the end of its life, you should need to dispose of this product, please note that
the waste electrical product should not be disposed of with household waste.
Check with your local authority or retailer for recycling advice.

Conte nt

Conte nt. ... ................. ... ... ....... ... ... .... ... ... ... .... ... ... ... .... ... ..0 1

Preca uti ons ... ... .... ... ... ... ... ... .... ... ... ... ... ....... ... ... ... ... ....... ..0 2

In sta lla tion ... .... ... .... ... .... ... ... .... ... .... ... .... ... .... ... ... .... ... 03-0 5

Removing,keeping an d ins tal l t he de tac hab le fro nt pa nel ... ..0 5

Location and fun cti on o f ke ys. ... ... ... ... ... ... ... ... ... ... ... ... ... ... .06

Location and fu nct ion o f the r emo te co ntr ol. ... ... ... ... ... ... ... ... 07

Gene ral operations.... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..0 8-1 2

Radio operations........ ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .12 -14

RDS (Ra dio d ata s yst em) o per ati ons... ... ... ... ... ... ... ... ... ..1 4-1 5

Media p lay ing b asi c ope rat ion s.. ... ... ... ... ... ... ... ... ... ... ... ..1 6-1 7

Media pla yin g ad van ced ope rat ion s.. ... ... ... ... ... ... ... ... ... .17 -20

Data d isc p laying operations... ... ... ... ... ... ... ... ... ... ... ... ... ... .21

USB operations........... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..2 1

SD/MM C ope rat ion s.. ... ... ... ... ... ... ... ... ... ... ... .....................22

Exte rna l AU X AV inpu t dev ice o p era tio ns. ... ... ... ... ... ... .........22

Setup ... ... ....... ... ... ....... ... ... ....... ... ... ....... ... ... ....... ... ... ..23 -27

S yst em se tup ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..2 3-2 4

Langu age setu p.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25

Audio s etu p.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .25

Speaker set up. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..2 5-2 6

Di git al setup.... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .27

Basic co nce pts on D VD pla yer. ... ... ... ... ... ... ... ... ... ... ... ... .28 -29

Tru oub leshoot ing ... ... ... ....... ... ... ... ... ... ....... ... ... ... ... ... ....... .30

Electri cal connections.......... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..3 1

Specific ati ons ... ... ... ... ... .......... ... ... ... ... ... ... ... ... ... .......... ... .32

01

Precautio ns

Head unit

a. To prot ect t raffi c saf ety a nd to a voi d vio lat ion s of tr affic l aws , do no t wat ch a vi deo p rog ram
or operate the u nit in the v ehicle driving.
b. In or der t o ens ure s afe ty an d nor mal u sin g, pl eas e mak e the p rof ess ion al to
install this product, do no t una uth ori zed d isassembly or repair of th e uni t avo id damage and
accidents.

. Do not plac e thi s pro duc t in a we t env iro nme nt an d water to p rev ent a n ele ctr ica l sho ck by

c

electric sho ck, d ama ge and fire.

.

d Thi s LCD d isplay uses exact electr oni c str uct ure , do no t bea t LCD d isp lay s tro ng, s o as to
avoid damage the product.

. insert an y oth er ob jects in to th e dis c loa der l ike a c oin o r pin, etc a s thi s may c aus e

e Do not

damage or a short circuit.

. Do no t cle an th e uni t wit h alc oho l, on ly cl ean w ith a s oft d ry cl oth ; bef ore c lea n, pl eas e tur n

f

off th e pow er su ppl y.
g. Do not e xpo se th e uni t in di rec t sun lig ht fo r a lon g tim e

. un or

h Do not plug the map card, wiring harness accessories when the unit is powered on, to
avoid damage to the unit or att ach men t.

i.

We sug ges t you d o not i ncr eas e the v olu me of t his u nit t oo hi gh, b eca use l ist eni ng to h igh
sound over time, it w ill a ffe ct th e hea lth o f you r ear s and h ear ing . At the s ame t ime , whe n you
are driving, if the v olume is too hi gh in car ca n cause yo u don't hear other vehicles whistle
sound, and other security tips , whi ch af fec ts th e saf ety o f dri ve .

. read th manual befo re using

j For u sin g thi s pro duct saf ely a nd co rre ctl y, ple ase
and keep the manual for reference in future.
For we f oll ows a principle of constant imp rovement, the s

subject to cha nge for fu rth er im pro vem ent w ith out n oti ce.

e carefully

pecifications and design are

Disc

.

a Use 12-cm CDs. Use o nly conventional, fully circular discs. Do not use s hap ed discs.

. Do no t use t he di rt, d ust , scr atc hes a nd wa rpi ng di scs i n thi s uni t.

b

c. Do not p lac e sti cke rs or m ake s cra tch es on d isc s.

. Do no t war p dis cs.

d

. A disc s hou ld al way s be ke pt in i ts ca se wh en no t in us e to pr eve nt fr om da mag e.

e

f. Do not p lac e dis cs in t he fo llo win g pla ces :

1. Dir ect s unl igh t.

2. Dir ty, du sty a nd da mp ar eas .

Nea r car h eat ing p ipe e tc. hea t sou rce s.

3.

On th e sea ts or d ash b oar d.

4.

tech nic ian

Clea n

Labe l si de u p

Use a dry sof t clo th to w ipe t he su rfa ce, i f the
disc is quite dirty.
Use a soft cl oth s lig htl y moi stu res w ith i sop rop yl
(rubbing) alcohol.
Never use solvents such as be nzene, thinner or
conventional record cleaners as they may
mar th e sur fac e of th e dis c.

Wipe t he d is c fr om t he cent er t ow ar d th e out si de e dg e

To remo ve th e rou gh sp ots o n the e dges of a new disc

A new disc may have irregularities. It will sometimes be
necessary to r emo ve th ese r oug h edges in advance by using
a ballpoint pen or pencil as shown in the illustration.

Roug h sp ot s on i ns ide edg e

Do not t ou ch t he u nd ersid e of d is c

Roug h sp ot s on o ut side ed ge

Ball p oi nt p en
or pen ci l

02

Insta llat ion

Safety pr ecautions :

a. Bef ore i nst all ing t he un it, d isc onn ect t he ca ble a tta che d to th e veh icl e bat ter y's n ega tiv e
(-) te rmi nal . Rem ove t he tw o scr ews a t the t op of t he he ad un it (a s sho wn as t he be low f ig. ).

b. Choose the mo unting location where the unit will not interfere with the normal drive of th e
driver. Insta ll th e unit where it does not ge t in th e dri ver 's vi sua l lin e and it will not get in the
driver's way and cannot injure the passenger if th ere is a sud den or emergency stop.
Avoi d ins tal lin g the u nit w her e it wo uld b e s ubj ect t o hig h tem per atu re, s uch a s fro m dir ect
sunlight, or from h ot ai r, fro m the h eat er, or wh ere i t wou ld be s ubj ect t o dus t, di rt or e xce ssi ve
vibration.
c. The u nit m ay no t wor k pro per ly if i s ins tal led a t an an gle o f mor e tha n 30° f rom h ori zon tal .

d. Only u se th e par ts pr ovi ded w ith t he un it to i nst all i t to ens ure p rop er in sta lla tio n.
The un aut hor ize d par ts ma y cau se ma lfu nct ion s.
e. Cons ult w ith y our n ear est d eal er if i nst all ati on re qui res t he dr ill ing o f hol es or o the r
modificati ons of the v ehi cle .
f. Befo re fi nal ly in sta lli ng th e uni t, te st t he co nne cti on an d mak e sur e it is a ll con nec ted u p
properly and make the u nit is w ork ing p rop erl y.

DIN Fr ont -Mo unt / R ear -Mo unt :
This unit can be p roperly installed either from 'Fron t' (c onv ent ion al DI N Fro nt- mou nt) o r
'Rear' (DIN Rear-mount insta llation, utilizing threaded screw Holes at the sides of the unit
chassis). Fo r det ail s, re fer t o the f oll owi ng il lus tra ted i nst all ati on me tho ds.

1. DIN F RON T-MO UNT ( Met hod A)

This unit can be i nstalled in any dashboard opening with the
following dimensions (DIN standard):

182 m m

53 mm

Befo re in sta lli ng th e unit, te st al l of th e con nec tio ns an d mak e sur e tha t the u nit i s wor kin g
properly, the n fol low t hes e s tep s to in sta ll th e uni t

.

1 Make s ure t he ig nit ion i s tur ned o ff. D isc onn ect t he ca ble a tta che d to th e veh icl e bat ter y's

:

negative (-) term ina l.

2. Discon nect the w ire h arness and th e antenna.

3. Pre ss th e but ton t o fol d dow n the f ron t pan el, t hen r emo ve th e fro nt pa nel .

4. Lift the t op of t he ou ter t rim r ing , the n pul l it ou t to re mov e it.

5. Use t he tw o sup pli ed release keys supplied to
remo ve th e unit fro m the m oun tin g bra cke t.
Inse rt th e lef t (“L ”) an d rig ht (“ R”) r ele ase k eys
as far a s the y wil l go (w ith t he no tch es fa cin g
up) into th e appropriate slots at the c ent er of

Oute r tr im ri ng

Fron t pa nel

Slee ve

Key( L)

Notc h up

the left an d rig ht si des o f the u nit .
Then slide the unit out of the mo unt ing b rac ket .

Key( R)

03

6.Fi t the m oun tin g bra cke t by in ser tin g it in to th e das hbo ard o pen ing a nd bend out the tabs

located around the bracket with a scr ewdriver. Not all tabs will be able to make contact, so
choose th e ones which will be most effe cti ve wi th th e das hbo ard .

Tabs

Scre wd riv er

Dash bo ard

Slee ve

7. Reconnect the wi re harness and the ante nna, being careful not to pinch any wires or cables.

8. Sli de th e unit into the s lee ve until i t loc ks in to pl ace .

9. To furt her s ecu re th e uni t, us e the s upp lie d met al st rap t o att ach t he ba ck of t he ca r rad io.
Use th e sup plied Hex Nut (M5mm) and Spring Was her t o att ach o ne en d of th e str ap to t he
mounting bolt(M5x 29.3mm) on the ba ck of t he un it.
If nec ess ary, b end t he me tal s tra p to fi t you r veh icl e's m oun tin g are a.
Then use th e sup plied Tapp ing S cre w (5x 25m m) an d Pla in Washer to attach the other end of
meta l str ap to a s oli d met al pa rt of t he ve hic le un der t he da shb oar d.

Note : To inst all t he sh ort t hre adi ng te rmi nal o f the m oun tin g bol t to th e bac k of th e uni t and t he
other long threading terminal to the dashboard.

Spri ng Was he r

Meta l st rap

Moun ti ng bo lt

Hex Nu t

Plai n Wash er

Tappin g Sc rew

10.Reconnect th e cab le to the ve hicle batte ry' s neg ati ve (- ) ter min al.

Then replace the outer trim r ing a nd insta ll th e unit's f ron t pan el.

Removin g the u nit

1. Mak e sur e the i gni tio n is tu rne d off , and t hen d isc onn ect t he ca ble a tta che d to th e veh icl e
battery 's ne gat ive ( -) te rmi nal .

2. Discon nect the w ire h arness and th e antenna,

3. Pre ss th e but ton t o fol d dow n the f ron t pan el, t hen r emo ve th e fro nt pa nel .

4. Lift the t op of t he ou ter t rim r ing t hen p ull i t out t o rem ove i t.

5. Use t he tw o sup pli ed release keys supplied to remove the unit from th e mou nti ng bracket.
Inse rt th e lef t (“L ”) an d rig ht (“ R”) r ele ase k eys a s far a s the y wil l go (w ith t he no tch es fa cin g
up) into th e appropriate slots at the c ent er of t he le ft an d rig ht si des o f the u nit .
Then slide the unit out of the mo unt ing b rac ket .

04

2. DIN R EAR -MO UNT ( Met hod B )

If you r veh icl e is a Ni ssa n, Toyo ta, p lea se fo llo w thi s mou nti ng in str uct ion t o ins tal i t.
If you r veh icl e is th e TO YOTA, pl eas e ins tal l wit h the s cre w hol es ma rke d T bo th si des o f the
unit; If yo ur ve hic le is t he NI SSA N, pl eas e ins tal l wit h the s cre w hol es ma rke d N bot h sid es
of the u nit.
Fixe d the u nit on the m oun tin g brackets wi th sc rew s. Ali gn th e scr ew ho les o n the m oun tin g
bracket with t he he ad unit, then t igh ten t he sc rew s on bo th si des .
(Note: We w ill n ot su ppl y the b rac ket , if ne ces sar y, yo u can c hoo se to u se th e ori gin al
vehicle mounting bracket, or buy it from t he de ale r.)

Left h an d sid e of t he h ead u ni t

N

T

T

N

5mm MAX

Choo se p rop er s crew ho le s mar ke d T or N bot h si de of t he u nit.

Moun ti ng br ac ket

Scre w

Righ t ha nd si de o f the hea d un it

T N

N

NT

N/T

T

5mm MAX

Scre w

Note :

Dash bo ard o r Co nsole

The outer trim r ing , mou nti ng sl eev e and t he me tal s tra p are n ot us ed fo r ins tal lat ion m eth od
B.

Removing, k eepi ng and i nsta ll the d etac habl e fron t pane l

Removin g the d eta cha ble f ron t pan el fr om th e hea d uni t

1. Pre ss th e OPE N but ton t o fli p dow n
the fr ont p ane l.

2. Gra sp th e rig ht si de of t he fr ont
panel, then gently push the fron t pan el
towards the le ft si de be for e pul ling it ou t
from t he un it.

Open b ut ton

Prot ec tiv e ca se

3.St ore t he fr ont p ane l in th e pro tec tiv e cas e pro vid ed fo r saf e kee pin g,
fron t pan el time .if the is not to b e use d for l ong

TO ATTACH T HE FR ONT PA NEL

Hold the right side of the f ron t pan el wi th th e pla te fa cin g dow n.
Firs t att ach t he le ft si de of t he fr ont p ane l to th e uni t by in ser tin g
the hole into th e left hol der.
Then slightly push it leftw ard s and atta ch th e rig ht si de ho le into
the ri ght holder. Finally push up the front panel.

Fron t pa nel

Fron t pa nel

2

2

1

1

05

Locat ion an d func tion o f keys

3

1 2

8

9

1

2

INT

10

MUTE

VOL

VOL

15

16

14

4

CAR PLAYER 65Wx4

EQ

DISP

TA

AF

REG

PTY

18

17

20

19

5

D1001

When yo u press the bu tton a nd the f ront p anel i s remo ved:

22

23

24

26

27

7

6

AUX

4

RDM

STOP

GOTO

11

5

12

6

13

21

25

Desc ri pti on s of F unc ti on Cont ro ls

(1) Po we r on /o ff ( ) B ut to n, MUTE B ut to n

(2) Vol um e In cr ea se( )/ De cr ea se ( ) Bu tto n
(3) BA ND (B ND ) Bu tton, M OD E( MO D) B utt on
(4) DI SP But to n (S ys te m Infor ma ti on D is pla y) ,
EQ But to n
(5) LC D Di sp la y
(6) US B po rt
(7) Op en ( ) B ut to n
(8) Pr es et S ta ti on 1, (Pl ay /P au se ) But to n
(9) Pr es et S ta ti on 2, INT (Intr o Sc an ) Bu tt on

(10) P re se t St at ion 3,R PT (Re pe at ) Bu tt on
(11) Pr es et S ta ti on 4, RDM ( Ra nd om ) Butto n

(12) P re se t St at ion 5, STOP Bu tton
(13) P re se t St at ion 6, GO TO But to n
(14) AS /P S (A ut om at ic S ea rc h & Pr es et m em or y Sc an ) Bu tt on

(15) B ut to n: Tu ne d own, Se ek d ow n,

prev io us t ra ck , fast re ve rs e

(16) M EN U Bu tt on
(17) B ut to n: Tu ne u p, Seek u p,

next t ra ck , fa st f orwar d

(18) I R Re mo te C on trol Se ns or
(19) P TY (P ro gr am Type ) Butto n,

REG( Re gi on al P rogra m) B ut to n
(20) AF (L is t of Al te rnati ve F re qu encie s) ,
TA(Tr af fi c Ann ounce me nt ) Bu tton

(21) AU X (A ud io /V id eo a uxili ar y In pu t) Jack
(22) S D/ MM C Me mo ry Card S lo t
(23) D is c sl ot
(24) D is c sl ot I nd icato r
(24) E je ct D is c ( ) ke y
(25) An ti -t he ft L ED Indi ca to r
(26) R ES ET B ut to n

06

Locat ion an d func tion o f the re mote c ontr ol

(1) P ow er on/off ( ) Bu tt on

(2) D IS P Bu tt on ( Sy st em I nf or ma ti on D is pl ay )

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Remark:

TA PTY

AF/REG

(3) A-B Bu tt on ( Para gr ap h Re pe at )
(4) R PT ( Re pe at p la yb ac k) B ut to n

16

(5) Z OO M( Zo om i n /Z oo m ou t) B ut to n
(6) C ur so r Bu tt on s ( )

17

(7) E NT ER B ut to n

18

(8) S ET UP B ut to n
(9) Tu ne d ow n, S ee k do wn , pr ev ou s tr ac k Bu tt on

19

(10) Tun e up , Se ek u p, n ex t tr ac k Bu tt on

20

(11) TIT LE ( DV D Tit le M en u) / P BC (P la yb ac k Co nt ro l) B ut to n
(12) (P la y/ Pa us e) B ut to n

21

(13) Preset Sta ti on 1 ~6 B ut to n, N um er ic 1 ~6 B ut to n
(14) TA (Tra ff ic An no un ce me nt ) Bu tt on , Nu me ri c 7 Bu tt on
(15) AF(List of Alternati ve Fre qu encies) Bu tt on ,

22

REG (R eg io na l Pr og ra m) B ut to n, N um er ic 8 B ut to n
(16) Source selector (MOD E) B ut to n

23

(17) AUDIO(Audio language/channel Select) Button

24

(18) SUB-T(Su bt it le L an gu age select/
Pla yb ac k in fo rm at io n se le ct ) Bu tt on ,

25

(19) MUTE But to n

26

(20) ANGLE(Camera angle selection for some disc) Button

27

(21) Volume Increase(VOL+)/Decrease(VOL-) Button
(22) MENU Butto n
(23) Fast F or wa rd B ut to n ( )

28

(24) Fast R ev er se B ut to n ( )
(25) GO TO B ut to n[ Se ar ch t it le /c ha pt er /t ra ck ( VC D/ CD )/ ti me ],

AS/P S (A ut om at ic S ea rc h & Pr es et m em or y Sc an ) Bu tt on

29

(26) Stop Playback Butt on ( )
(27) PROG(P ro gr ammed play mode) , LOC /D X Bu tt on

30

(28) RDM(Random playback) Button, MO/ ST B ut to n
(29) Numeric 0 Butt on , BA ND B ut to n
(30) PTY( Pr og ra m Typ e) B ut to n, N um er ic 9 B ut to n

◄/► , ▲/ ▼

♦ Remove th e insulating tape before using for the fi rst t ime .
♦ Point the r emo te co ntr ol at t he re mot e sen sor w ith in 2 me ter s.
♦ It may n ot be p oss ibl e to op era te th e rem ote c ont rol i f the r emo te co ntr ol se nso r is
expo sed t o dir ect s unl igh t.
♦ Operati on angle: about ±30°i n each the direction of the fr ont o f the r emo te se nso r.
♦ The re mot e con tro l is a sm all , lig htw eig ht pr eci sio n dev ice . To avo id da mag e, sh ort
batt ery l ife , ope rat ion al er ror s and p oor r esp ons e.
Please take note of the fo llo win g points for th e rem ote c ont rol :

- Do not subj ect the re mot e con tro l to ex ces siv e sho ck.

- Do not put in a t rou ser p ock et.

- Keep away from f ood , moi stu re an d dir t.

- Do not place in direct sunshine.

Battery replacement

Batt ery t ype : a but ton c ell l ith ium b att ery ( CR2 025 3 V)

1. Remove the ba tte ry ho lde r by pr ess ing t he lo cki ng
tab with yo ur th umb a nd pulling it out.

2. Replace the battery w ith t he sa me ty pe an d the ( +)
side faci ng up.

3. Closing the cover : Gen tly p ush i n the h old er un til
securely locked into place.

B

A

07

Gener al ope rati ons

Reset fun cti on

Operati ng th e unit the f irs t tim e, af ter c onn ect wir e har nes s ,

1. all th e properly ple ase p res s
the RESET b utt on (y ou ca n see i t aft er re mov e the f ron t pan el) t o

fact ory s ett ing s.

2.

Once t he sy ste m of th e uni t hal ts, e rro r dis pla y, fun cti on bu tto ns do n ot wo rk, p res s the
RESE T but ton w ith e ith er a ba llp oint pen or thi n met al ob ject to

fact ory s ett ing s.

restore t he un it to t he or igi nal

Turni ng th e uni t on and off
In power off mod e, sw itc h on th e uni t by pr ess ing a ny bu tto n on th e hea d uni t (ex cep t the
OPEN b utt on an d the E JEC T but ton ) or on t he re mot e con tro l. If y ou in ser t a dis c to di sc sl ot,

you can also switch on the unit. Whe n the s yst em is o n, pr ess a nd ho ld th e pow er on / off
button ( ) on t he he ad un it, o r bri efl y pre ss th e pow er on /of f but ton ( ) t o tur n off the u nit .

Adju sti ng th e Volu me Le vel

Briefly pres s the V OL / VO L bu tto n on th e hea d uni t or br ief ly pr ess t he VO L+/ - but ton
the re mot e con tro l to ad jus t the v olu me le vel o f thi s uni t.

Mute o n/o ff
When the un it is s wit che d on, b rie fly p res s the M UTE b utt on to t ogg le mu te on o r off .

System menu se tti ngs

- During FM radio mode, briefly press the ME NU bu tto n on th e hea d uni t or re mot e con tro l to
access th e sys tem m enu s ett ing m ode . Bri efl y pre ss th e or bu tto n on th e hea d uni t or
remo te co ntr ol, y ou ca n acc ess t he fo llo win g sub -me nus :

“RDS”->” ”RA DIO ”-> “AUDIO”->“ SYS TEM ”

- During the disc, SD c ard , USB p lay ing m ode o r ext ern al au ido/video auxiliary input mode,
you can access the fo llo wing sub-menus by pressing the or bu tto n:

restore t he un it to t he

“AUD IO” - >“S YST EM”

Afte r sel ect ing a ny on e of ab ove m enu s, br ief ly pr ess t he ME NU bu tto n aga in to a cce ss th e
selecte d menu. If y ou wa nt to e xit t he cu rre nt me nu an d ret urn t he up per m enu , pre ss th e

AS/P S but ton o n the h ead u nit o r rem ote c ont rol .
The st ruc tur e of sy ste m men u:

TA SEE K/TA ALAR M
PI MU TE/PI S OUND
TA VOL (TA Vol ume pre set): T he adju stabl e range i s 00 ~ 50
RET UNE L( Lon g, 60 sec onds) / RETUN E S(Sh ort , 40 seco nds)
REG O N/REG O FF

STE REO/M ONO
DX/ LOC
VOL (volu me): fr om 00~5 0
BAS (bass )/MID (midd le)/T RE(tr eble) : -10 ~-1, 00 , +1~+1 0The a djust able ra nge is
BAL (bala nce): 08L ~01L, L (Left )=R(R ight) , 01R~0 8RThe a djust able ra nge is
FAD( fader ): 08F~0 1F, F(Fro nt)=R (Rear ), 01R~ 08RThe a djust able ra nge is
CET (cent er): ON /OFF
CET (cent er): -8~- 1, 0, +1~ +8The a djust able ra nge is
SUB (subw oofer ): ON/ OFF
SUB (subw oofer ): -8~ -1, 0,+ 1~+8The a djust able ra nge is
DSP (Digi tal sig nal pro cessi ng): DS P OFF/F LAT/PO P/ROC K/CLA SS

LOU D(lou dness ): OFF/ ON

VOL (volu me) LAS T / ADJ (Swit ches on a t the las t switc hed off v olume l evel / at c ustom ized vo lume le vel)

V-AD J(cus tomiz ed volu me adju st): 0 0~50The a djust able ra nge is

24 HO URS/1 2 HOURS
XX: XX (hou r : minut e, )To adju st hour s by usin g the VOL ; To adj ust min utes by u sing th e VOL .
BEE P tone( Pro mpt voi ce of the p ush but ton) : ON/ O FF

SPK (spea ker out put): O N/OFF
MIX C H(4.1 c hanne l)/ 5.1 C H (It onl y for rec orded 5 .1 chan nel DVD d isc / MPE G4 file )

( You ca n sele ct 12/2 4 hour di splay f ormat a ccord ing to yo ur need .)

MENU

RDS

RADI O

AUDI O

SYST EM

08