Enwork Ambition Beams Installation Manual

Ambition Beams

Ambition Beam Add-On Kit // Rev A

Add-on Kit

Installation Guide

2) Tools and Supplies Required

INSTALLATION GUIDE

Drill/Driver 1/4” Hex Drive Bit or

Allen Wrench

#2 Square Drive Bit

#2 Phillips Drive Bit 3/8” Nut Driver Bit Socket Wrench/Ratchet

Socket Wrench Extension 1/4” & 3/8” Socket Set

5/16” Drill Bit

2) Tools and Supplies Required

INSTALLATION GUIDE

Marker/Pen Level Hammer Punch

1) Parts and Fasteners Included

INSTALLATION GUIDE

Aluminum Support Bar (1x)

5/16”-18 x 2 3/4” Socket

Head Screw (1x)

5/16” Square Nut (1x)

1/4”-20 x 1/2” Hex Bolt (16x)

10-24 x 3/8” Phillips Machine

Screw (2x)

10-24 Hex Nut (2x)

Jig for Support Bar Holes Jig for Connection Block Holes

Connection Block (2x)