Envision Peripherals L32W461, L27W461 User Manual

User's Manual

LCD TV

L27W461

Q41T3201673 1A

L32W461

TABLE OF CONTENTS

TABLE OF CONTENTS …………………………….………………….. 1
FOR YOUR SAFETY …………………………………………………... 2
PRECAUTIONS AND REMINDERS ……………………………………3
IMPORTANT SAFETY INSTRUCTIONS …………………………….. 5
PREPARAT ION ………………………………………………………… 7
PERIPHERAL CONNECTION GUIDE ………………………………. 9
OPERATING INSTRUCTIONS ………………………………………. 11

Apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, Such as vases, Shall be placed on the apparatus.
Caution - Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.

TO USE THE FRONT PANEL CONTROL …………………….. 11
TO USE THE REMOTE CONTROL ……………………………. 12
TO USE THE MENUS ……………………………………………. 13
SETUP MENU …………………………………………………….. 13
VIDEO MENU ……………………………………………………... 14
AUDIO MENU ……………………………………………………... 15
FEATURE MENU …………………………………………………. 16
TIPS ………………………………………………………………… 20

PRODUCT SPECIFICATION …………………………………………. 22

BEFORE CALLING SERVICE ………………………………………… 23

GLOSSARY ………………………………………………………... 24

APPENDIX

………………………………………………...….......25

SYMBOL SYMBOL DEFINITION

DANGEROUS VOLTAGE: The lightning flash with
arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated

SA 1965

“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of
electrical shock to persons.

INSTRUCTIONS: The exclamation point within on
equilateral triangle to alert the User to the presence of
important operating and maintenance (servicing)

SA 1966

instruction In the literature accompanying the appliance.

English

1

FOR YOUR SAFETY

Before operating the TV please read this manual thoroughly. This manual should
be retained for future reference.

FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a

English

residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTICE

1. The changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the
equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused

by unauthorized modification to this equipment. It is the responsibilities of the
user to correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Dangerously high voltages are present inside the TV. Do not open the cabinet.
Refer servicing to qualified personnel only.

SAFETY: Lamp Disposal

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE
INFORMATION, CONTACT THE ELECTRONIC
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.

2

PRECAUTIONS AND REMINDERS

Place unit on even surfaces.

Don't place the TV in confined spaces
or in a box when using it.

English

Unplug immediately if is malfunction
like no picture, no video/audio,smoke
and bad odor from TV.

Don't throw any object inside the TV
box like metals or other flammable
materials.

Unplug immediately if other foreign
materials are put inside TV box or if
the TV fell down.

Prohibit/Avoid opening TV cabinet

3

English

Remember to unplug the AC cord
from the AC outlet before cleaning. Do
not use liquid cleaners or aerosol
cleaners to clean the display.

Avoid direct sunlight, dusty, high
humidity and smoky areas.

Make sure to unplug the unit when not
in use for a long period of time (days).

Do not cover or block any vents and
openings. Inadequate ventilation may
shorten the life of the display unit and
cause overheating.

Call service personnel to clean the
internal part of the TV once a year.

Do not place the display near water,
such as bathtub, washbasin, kitchen
sink laundry tub, swimming pool or in
a damp basement.

Notice for Remote Controller

Avoid Dropping Avoid Liquids Avoid Aerosol Cleaners

3

2

1

6

5

4

9

8

7

0

3

2

1

6

5

4

9

8

7

0

3

2

1

6

5

4

9

8

7

0

4

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A

polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and third grounding prong. The wide blade or third
prong is provided for your safety. When the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.

English

13. The TV should be operated only from the type of power source indicated on

the label. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.

14. Unplug this apparatus during lightning storms or when unused for long

periods of time.

15. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into apparatus,
the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

16. This product may contain lead or mercury. Disposal of these materials may

be regulated due to environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronic Industries
Alliance: www.eiae.org

17. Damage Requiring Service – The appliance should be serviced by qualified

service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked

change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

5

18. Tilt/Stability – All televisions must comply with recommended international

global safety standards for tilt and stability properties of its cabinets design.
 Do not compromise these design standards by applying excessive pull

force to the front, or top, of the cabinet, which could ultimately overturn
the product.

 Also, do not endanger yourself, or children, by placing electronic

equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage

19. Wall or Ceiling Mounting – The appliance should be mounted to a wall or

English

20. Power Lines – An outdoor antenna should be located away from power lines.

21. Outdoor Antenna Grounding – If an outside antenna is connected to the

and/or personal injury.

ceiling only as recommended by the manufacturer.

receiver, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides
information with respect to proper grounding of the mats and supporting
structure grounding of the lead-in wire to an antenna-discharge unit, size of
grounding connectors, location of antenna-discharge unit, connection to
grounding electrodes and requirements for the grounding electrode. See
Figure below.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL
CODE
Note to the CATV system installer: This reminder is provided to call the
CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Please, make sure to connect the power plug to the wall outlet socket after
connecting the TV to the adapter!

22. Objects and Liquid Entry – Care should be taken so that objects do not fall

and liquids are not spilled into the enclosure through openings.

6

PREPARATION

Please, make sure to connect the power plug to the wall outlet socket after
connecting the TV to the power cord!

. Install the base stand; place the TV on a solid surface.

1

Ensure that the TV is placed in a position to allow free flow of air. Do not cover
the ventilation openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as lighted
candles, should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure to rain or water. The equipment shall
not be exposed to dripping or splashing.

2. Connect the antenna cable or CATV cable to the aerial socket ANT IN 75Ω at

the back of the TV set.

English

7

3. Remote control:
Remove the cover of the battery compartment. Insert the 2 batteries supplied

(Type AA 1.5V).

English

4. Power:

Insert the power cord in the wall socket having an AC power supply. Then push
the AC power switch to ON state. You can see LED states at the front panel. If
the LED color is Blue, means the TV set is power on. If the LED color is
amber, which means this TV set is in stand by state.

5. Turn on the TV:

Push the POWER key on the Remote control or the control knobs on top of TV.
The TV will be power-on and the user can see the display on the screen
few seconds .

POWER key

after a

8

PERIPHERAL CONNECTION GUIDE

S-Video / Composite / Component /

HDMI / VGA interface

SPDIF Out

RF IN

(ATSC / NTSC)

AC Pow er

(Socket and Switch)

SPDIF
Digital Audio
output Video2 S-Video

Video Out

input Rear Video5 Component 1 input

Video8 Video1 Composite Video6 Component 2 input

HDMI input Input Rear

Once your equipment is connected, use the following procedure to view the input

DVD/VCD/VCR/STBDVD/VCD/VCR/STB

signal:

Press the source button on the remote controller to select the relevant source to
view. (ex: Press VIDEO button to select “Video1 Composite Rear” if you have
connected a DVD player to Video1 Composite socket.)

"HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC."

English

9

English

RS-232 (for update)

Video4 S-Video Earphone
input Side OUT

Video3 Composite L/R Line IN Video7 VGA

Input Side

DVD/VCD/VCR/STB

PC L/R Line Output
of PC terminal

15-pin D-Sub VGA Output
of PC terminal

Note: The

MUTE key on the remote control works on both TV internal speaker

and the earphone output.

10

OPERATION INSTRUCTIONS

TO USE THE FRONT PANEL CONTROL

⑤
④
③
②
①

English

SOURCE

①

- VOL +

②

③

- CH +

④

MENU

⑤

Source key: Press to select the input source.

VOL - : Press to decrease the sound volume level.
VOL +: Press to increase the sound volume level.

Power key: Press to turn on / off (standby) the TV set.

(Press to turn on TV after the Power-ON status LED had
changed to the Amber color and finished flashing.)

CH - : Press to select the next lower Program number.
CH +: Press to select the next higher Program number.

Menu key: Press

to open or exit the OSD menu.

11

TO USE THE REMOTE CONTROL

“POWER”

Press to power ON/OFF (standby) TV.

(Note:1.TV is never completely power off

unless physically unplugged.

2.Press to turn on TV after the power
on status LED had changed to the
amber color and stopped flashing. )

“VIDEO”

Press repeatedly to choose S-Video/

English

Composite source mode (Video 1 ~ 4).

“COMP”

Press repeatedly to choose Component
source mode (Video 5 ~ 6).

“PC”

Press repeatedly to choose VGA or
HDMI source mode (Video 7 ~ 8).

“TV”

Press to choose ATSC/NTSC TV source
mode.

“0 ~ 9 /- number”

Press to enter TV channel number to
select channel (Press ‘-’ to indicate
choosing the sub-channel).

“SLEEP”

Press to set a time period (OFF/ 30min/
60min/ 90min) after which the TV should
switch itself to standby mode.

“FREEZE”

Press to freeze the displayed picture

“VOL- / VOL+”

Press + or - to adjust the volume.

“MENU”

Press to open or exit menu.

“ ”,“ ”,“＜”,“＞”,“OK”

Press to adjust the various function
items on the menu.

“V-CHIP”

Press to lock / unlock Parental Control
temporarily.

table of MPAA or TV Rating.)

(After setting the restricted

“DISPLAY”

Press to show the information about the
input source、TV channel、display
resolution and current time.

“MUTE”

Press to set TVsound mute ON/OFF

“PREV CH”

Press to display the previous TV

“MTS/SAP”

Press to activate the NTSC TV sounds,
such as: Stereo, SAP or Mono tone.

“WIDE”

Press to choose the display aspect as:
Normal, Wide, Zoom or Cinema mode.

“SOURCE”

Press repeatedly to choose the various
input sources (Video 1 ~ 8).

“CH- / CH +”

Press + or - to browse through the TV
channels.

“Exit”

Press to exit menu or OSD.

“VIDEO ADJ”

Press to choose the Brightness or
Contrast adjustment.

“AUDIO ADJ”

Press to switch the ATSC multi-channel
TV sounds.

“CC”

Press repeatedly to change the closed
caption type as
CC1/CC2/CC3/CC4/TEXT1/
TEXT2/TEXT3/TEXT4/Off.

“EPG”

Press to show the information the same
as “DISPLAY” key

“FAV”

Press to display the favorite TV channel.

(After setting the favorite TV channel on
main menu)

.

.

.

.

12

TO USE THE MENUS

1. Press the MENU button to display the main menu

2. Use the cursor up/down to select a menu item.

3. Use the cursor left/right to enter a submenu.

4. Press the OK button to enable/disable the function.

5. Press the MENU or EXIT button to exit the menu.

Press the MENU button to enter the main OSD (On Screen Display). Adjust the
items including Setup menu, Video menu, Audio menu and Feature menu.
However, some function items in the menus may only be enabled in the particular
source modes.

SETUP MENU

The Setup menu in TV mode shows as below. In others source modes, the Setup
menu only shows Menu Language and Aspect Ratio items.

English

1. Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV).

2. DTV Signal: Show the intensity of the received DTV signal.

3. Auto Ch Search: Automatically scan all NTSC / ATSC TV channels and

then store in the channel table. In channel scan process, the
display the number of channels which had been found.

13

OSD can

4. Manual Ch Set: Show the channel setup table. User can choose to display the

ATSC or NTSC TV channels and then edit (add/delete) the channel numbers.

5. Channel Labels: Show the NTSC or ATSC TV channel label menu for user

modifying channel labels specifically.

6. Menu Language: Select the menu display language. (English /Spanish /

French)

7. Aspect Ratio: Select the display aspect ratio. (Normal / Zoom / Wide / Cinema)

8. Favorite Channel: Set or cancel the most favorite TV channel. After setting

English

once, user can change to the favorite channel immediately through pressing
the FAV key of the remote control.

VIDEO MENU

The Video menu in most source modes shows as below. It provides several video
adjustment items for user fine tuning the video display. Only in VGA source
modes, the Video menu simply provides Contrast, Brightness, Back light and
Settings (Preset) items.

1. Contrast: Video contrast adjustment, the tuning range is 0 ~ 100.

2. Brightness: Video brightness adjustment, the tuning range is 0 ~ 100.

3. Sharpness: Video sharpness adjustment, the tuning range is -50 ~ 50.

4. Color: Video color chroma adjustment, the tuning range is 0 ~ 100.

5. Tint: Video tint adjustment, the tuning range is R50 ~ G50.

6. Back Light: Back light strength adjustment, the tuning range is 0 ~ 10.

7. Settings: Restore the default video settings.

14

AUDIO MENU

The Audio menu in TV mode shows as below. It provides some audio adjustment
items for user to modify the audio setting. Excepting in ATSC TV mode, the
Audio Language option is disable in others source modes. The audio language
setting is only available in ATSC TV source.

Treble items are enabled as well

effect).

1. Audio Language: Change the audio language setting on ATSC TV programs.

The number of the supported audio languages depends on the ATSC TV
programs.

2. Bass: Bass tone adjustment, the tuning range is 0 ~ 63. (The default state is

enabled)

3. Treble: Treble tone adjustment, the tuning range is 0 ~ 63. (The default state is

enabled)

4. Balance: Audio balance adjustment, the tuning range is L31 ~ R31.

5. Digital Audio Output: Digital audio output format selection, user can choose

RAW (default) or PCM format.

6. SRS: Choose to turn on / off the SRS sound effect. The default value is Off.

7. TV Speaker: Choose to turn on / off the TV internal speaker. The digital audio

output signals、earphone output signals and the composite L/R audio output
signals will not be turn-off even though the TV speaker is off. The default

setting is On.

8. Settings: Restore the default audio settings.

SRS, SRS and
designed using SRS technology with permission from SRS Labs, Inc.

are registered trademarks of SRS Labs, Inc.This product is

as SRS option set “Off”

The Default states of Bass and

(tune-off the

While

sound

English

15

FEATURE MENU

The Feature menu in TV mode shows as below. It provides certain optional
control functions such as timer setting, standby timer, video noise reduction,
parental control (V-chip) and close caption style setting. This menu gives users
the most flexibilities to satisfy their generally demands. According to the various
requirements in different source modes, certain features should be hidden
(disable) on the menu. The details footnotes will be described clearly below.

English

1. Time Set: Set current time. This sub-menu includes Time Zone and Time

items. 【Time Zone 】item provides user to

、

Pacific
user to set the time clock.

2. Sleep Timer: Enable or disable the TV standby timer. User can set the TV

standby timer
cursor leaving the sub-menu. (At the moment, the item shows 『** min Left』

and the cursor highlights on the Feature icon.)

3. Advanced Video Menu:

Temperature

Alaska、Hawaii、Eastern、Central and Mountain. 【Time】item provides

as off / 30 min / 60 min / 90 min. Timer starts to count down after

Provide the

and

3D Y/C filter

options for enhancing video quality.

16

set current time zone, such as:

Noise Reduction

setting、Color

【

Noise Reduction】gives four NR effect degrees, such as: Low、Mid、High and Off.

The default setting is Low.

【

3D Y/C】provides On / Off switches. The default setting is On.

【

Color Temperature】gives three color temperature modes as: Normal、Warm and

Cool. The default mode is Warm.

【

Setting】restores the default advanced video option settings.

English

4. Password Set: Change the 4-numeral parental control password. Three steps

are required for changing the password:
Password -> Confirm New Password. Note: This item is only available in TV,
Composite and S-Video source modes. The default password is

5. Parental Control: provide the parental Control (V-chip) function setting.

entering the Parental Control sub-menu, user has to key in the password first. Then
enter the Parental Lock item, User can modify the restricted table about MPAA or
TV Rating respectively. While exiting the sub-menu, the parental control function is
working.
the V-CHIP key on the remote control and then key in the correct password. Note:
This feature is only available in TV, Composite and S-Video source modes. (The
default password is: 0 0 0 0.)

The inhibitive channels or source signals can be un-lock through pressing

Enter Old Password -> Enter New

『

0 0 0 0』.

Before

17

English

6. Digital Close Caption: Provide numerous options for setting the close caption

style. In the sub-menu,【Style】item
If Custom mode is selected, user can modify the detail styles described below.

The setting result will be shown immediately on the bottom side of the sub-menu
OSD. Note: This feature is only available in Digital TV (ATSC) mode.

can be set as Automatic or Custom mode.

18

【Size】: Digital close caption font size, which can be set as

Small、Normal or

Large.

【Font】: Digital close caption font style, which can be chosen as

Default or

Font 1 ~ 7.

【

Text Color】: Giving Red / Green / Blue / Yellow / Magenta / Cyan / Black / White

Colors.

【Text Opacity】: Giving
【Background Color】:

Transparent / Translucent / Solid / Flashing modes.

Giving Red / Green / Blue / Yellow / Magenta / Cyan / Black /

White Colors.

【Background Opacity】:
【Edge Effect】: The text edge effects, which gives

Giving Transparent / Translucent / Solid / Flashing modes.

None / Raised / Depressed /

Uniform / Left Shadow / Right Shadow modes.

【Edge Color】: The colors of text edge effects, which provides

Red / Green / Blue

/ Yellow / Magenta / Cyan / Black / White Colors.

7. Component Set: This option only shows and is available in component mode,

which provides several items for the component display fine tuning, such as :
【H-Position】、【V-Position】and 【Phase】. All these items giving the

tuning range from 0 to 100. 【Setting】item provides
setting values restoring.

Component setting-480i

H-Position

V-Position

Phase

Setting

the default component

Preset

English

To Move To Select To Exit

8. VGA Set: This option only shows and is available in VGA mode, which provides

several items for the VGA display fine tuning, such as : 【H-Position】、【V-
Position】、【Clock】and 【Phase】. All these items giving the tuning range
from 0 to 100.【Setting】item provides

the default VGA setting values restoring.

19

TIPS

Care of the screen

Do not rub or strike the screen with anything hard as this may scratch, mar, or
damage the screen permanently.
Unplug the power cord before cleaning the screen. Dust the TV by wiping the
screen and the cabinet with a soft, clean cloth. If the screen requires additional
cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol cleaners.

English

Mobile telephone warning

To avoid disturbances in picture and sound, malfunctioning of your TV or even
damage to the TV, keep away your mobile telephone from the TV.

End of life directives

We are paying a lot of attention to produce environmentally friendly in green focal
areas. Your new receiver contains materials, which can be recycled and reused.
At the end of its life specialized companies can dismantle the discarded receiver
to concentrate the reusable materials and to minimize the amount of materials to
be disposed of.
Please ensure you dispose of your old receiver according to local regulations.

Regulatory Notices – Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

˙Reorient or relocate the receiving antenna.
˙Increase the separation between the equipment and the TV.
˙Connect the equipment into wall power outlet on a circuit different from that to

which the receiver is connected.

˙Consult the dealer or an experienced radio or television technician for help.

Modifications –

The FCC requires the user to be notified that any changes or modifications made
to this device that are not expressly approved by Norcent Technology Inc. may
void the user’s authority to operate the equipment.

Cables –

Connections to this device must be made with shielded cables with metallic
RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.

20

Canadian notice –

This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.

Avis Canadian –

Cat apparel numerous de la classed B respected toutes les exigencies du
règlement sur le materiel brouilleur du Canada.

English

21

PRODUCT SPECIFICATION

NOTE:
*This model complies with the specifications listed below.
*Designs and specifications are subject to change without notice.
*This model may not be compatible with features and/or specifications that may be added in

the future.

English

Television System:

NTSC standard
ATSC standard (8-VSB, Clear-QAM)

Channel Coverage:

VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mild band (A - 8 through A - 1,

Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)

A through

Power Source:

AC power supply: 100V~240 V, 50/60 Hz

Power Consumption

≤ 27" : 150W

32" : 180 W

≤

1 W in standby mode (power cord plugged in
and power OFF)

Audio Power

10 W + 10 W, Internal Speaker

Video/Audio Terminals:

Side AV include 1 Group:

S-Video/Video/Audio Input
Rear AV include 1 Group:
S-Video/Video/Audio Input

S-VIDEO INPUT:

Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75
ohm

VIDEO/AUDIO INPUT:

VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms)

Component INPUT:

Rear Component include 2 Groups:

Y : 1V(p-p), 75 ohm, including sync.
Pr/Cr: ±0.35V(p-p), 75 ohm
Pb/Cb: ±0.35V(p-p), 75 ohm

AUDIO: 150 mV(rms)
Suggested resolutions:1080i, 720p, 480p,
480i

HDMI Terminals:

HDMI INPUT: Rear HDMI include 1 HDMI Input
HDCP compliant
E-EDID compliant
Suggested scan rates: 1080i, 720p, 480p, 480i

VGA Terminals:

VGA INPUT:
Rear VGA include 1 D-SUB 15 Pin Input
E-EDID compliant

I )

Suggested scan rates: 640X480 /60Hz

Audio INPUT: Headphone Mini-jack for stereo (3.5Φ)

800x600 /60Hz
1024X768 /60Hz
1360X768 /60Hz

Video/Audio Output:

VIDEO: 1 V(p-p), 75 ohm, negative sync
AUDIO: 150 mV(rms)

Dimensions:

Include Stand:

27":695mm(W) x540 mm(H) x 230mm(L)

32":810 mm(W) x 605 mm(H) x 236mm(L)

Weight: 27":14.3kg

Wall Mounting:

VESA

32":15.6 kg

Optional

27":100 X 100 mm
32":200 X 200 mm

Supplied Accessories:

1pcs Power cord
1pcs Remote control
(with two AA alkaline batteries)
1pcs User manual

1pcs Signal cable
1pcs Pc Audio cable

NOTE: This TV set does not provide HD video

Output.

22

BEFORE CALLING SERVICE

Please make these simple checks before calling service. These tips may save
you time and money since charges for receiver installation and adjustments of
customer controls are not covered under your warranty.

Symptoms Items to Check and Actions to follow
“Ghost ” or double image

*This may be caused by obstruction to the

antenna due to high rise buildings or
hills. Using a highly directional antenna
may improve the picture.

No power *Check that the TV’s AC power cord is plugged

into the mains socket.

*Unplug the TV, wait for 60 seconds. Then re-

insert plug into the mains socket and turn on
the TV again.

No picture *Check antenna connection at the rear of the

TV to see if it is properly connected to the TV.

*Possible broadcast station trouble. Try

another channel.
*Adjust the contrast and brightness settings.
*Check the Closed Captions setting. Some

TEXT modes could block the screen,

Good picture but no sound *Increase the VOLUME.

*Check that the TV is not muted; press the

MUTE button on the remote control.

Good sound but poor color *Adjust the contrast, color and brightness

settings.

Poor picture *Sometimes, poor picture quality occurs when

having activated an S-VHS camera or

camcorder connected and having connected

another peripheral at the same time. In this

case switch off one of the other peripherals

Snowy picture and noise *Check the antenna connection
Horizontal dotted line *This may be caused by electrical interference

(e.g. hairdryer, nearby neon lights, etc.)
*Turn off the equipment.

Television not responding to
remote control

*Check whether the batteries are working.

Replace if necessary
*Clean the remote control sensor lens on the

TV.
*You can still use the buttons at the front of

your TV.
*Select the TV mode to be sure your remote

control is in the TV mode.

English

23