Envision EN-780e User Manual

EN-780e

EN-780e

17 inch Flat CRT Color Monitor

User’s
Manual

EN-780e_31MY02

by Envision Peripherals, Inc.
www.ENVISIONmonitor.com

Before operating your monitor, please read this
manual thoroughly.

1

31MY02

For Your Safety

EN-780e

FCC Statement

This equipment has been tested and f ound to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to prov ide reasonable protection
against harmful inte rference in a residential
installation. This equipmen t generates, uses and
can radiate radio frequency energy, and if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. H owever, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on,the us er is encouraged to try
to correct the interference by one or more of the
following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment
and receiver.

3. Connect the equipment into an outlet ona circu it
different from that to which the receiver is
connected.

4. Consult the dealer or an experienced radio/TV
technician for help.

Notice

1. The changes or modi fications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.

2. Shielded interface c ables and AC power cord, if
any, must be used in order to comply with the
emissionlimits.

3. The manufacturer is not responsible for any
radio or TVinterference caus ed by unaut horized
modification to this equipment. It is th e
responsibility of the user to correct such
interference.

As an ENERGY STAR
Peripherals, Inc. has determined that this product

meets the ENERGY STAR
efficiency.

®

Partner, Envision

®

guidelines for energy

Warning

To prevent fire or shock hazard, do not expose the
monitor to rain or m oist ure. Dangerously high
voltage is present inside the monitor. Do not open
the cabinet. Refer servicing to qualified personnel
only.

EN-780e

2

31MY02

For Your Safety

EN-780e

Precautions

• Do not use the monitor near water, e.g. near a
bathtub, washbowl, kitchen s ink, laundry tub,
swimming pool or in a wet basement.

• Do not place the monitor on an unstable cart ,
stand, or table. If the m onitor falls, it can injure a
person and cause serious damage to the
appliance. Use only a cart or stand
recommended by the m anufacturer or sold with
the monitor. If you mount the monitor on a wall
or shelf, use a mounting kit approved by the
manufacturer and follow the kit instructions.

• Slots and openings in the back and botto m of
the cabinet are provided for ventilation. To
ensure reliable operation of the monitor and to
protect it from overheating, be sure these
openings are not b lock ed or covered. Do no t
place the monitor on a bed, sofa, rug, or similar
surface. Do not place the monitor near or over a
radiator or heat register. Do not place the
monitor in a bookcas e or cabinet unless proper
ventilation is provided.

• The monitor should be operated only w ith t he
type of power source indicated on the label. If
you are not sure of the t y pe of power supplied to
your home, cons ult your dealer or local power
company.

• The monitor is equipped with a three-pronged
grounded plug, a plug with a third (grounding)
pin. As a safety fe ature, this plug will only fit into
a grounded power outlet. If your outlet does not
accommodate the three-wire plug, have an
electrician install the correct outlet, or use an
adapter to gr ound the appliance safely. Do not
defeat the safety purpose of the grounded plug.

• Unplug the unit d uring a lightning storm or when
it will not be use d f or long periods of time.
This willprotect t he monitor from damage due to
power surges.

• Do not overload power strips and extension
cords. Overloading can result in fire or elect ric
shock.

• Never push any object into the slot on the
monitor cabinet. It could short circuit parts
causing a fire or electric shock. Never spill
liquids on the m onitor.

• Do not attempt to service the monitor yourself;
opening or removing covers can expose you to
dangerous voltage and other hazards. Please
refer all servicing to qual ified service personnel.

• To ensure satisfactory operation, us e t he
monitor only wit h UL-listed computers which
have appropriately configured receptacles
marked between 100 - 240 V AC, Min. 3.5A.

EN-780e

• The wall socket should be installed near the
equipment a nd should be easily acce ssible.

3

31MY02

For Your Safety

EN-780e

General Notes

• Do not install the monitor near heat sources
such as radiators or air ducts.

• Do not place m onitor in direct sunlight or in
areas with excessive dust, mechanical vibration
or shock.

• Save the original shipping carton and packing
materials in case you need to ship your monitor.
Be sure to repackage yo ur monitor as it was
originally packed at the factory.

• Periodically clean your monitor wit h a soft cloth.
Stubborn stains may be removed with a cloth
lightly dampened with a mild detergent solution.

Never use strong s ol vents such as thinners,
benzene, or abrasive cleaners, sin ce these
will damage the cabinet. Always unplug the

monitor before cleaning it.

Using the Right Power Cord

ThesuppliedpowercordisaNEMA5-15style
plug. It is UL-listed an d CSA labeled for
125 volts AC.

General Features:

• 17" (43.2 cm) Color Monitor

• Crisp, Clear Display for Windows

• Supports Resolutions up to 1600 X 1200 pi xels
@75Hz

• EPA ENERGY STAR

®

Package Contents

The box that your monitor was sh ipped in should
have included the fo llowing items:

1. EN-780e Color Monitor

2. Powe r Cord

3. Quick Start Guide

4. Booklet
(containing Warranty and Safety information)

If the monitor will be connected to your computer’s
power outlet, use a minimum No. 18 AWG, type
SJT or SVT three conductors cord with one end
terminating with a m ale grounded plug, rated 10A,
250V, CEE-22. The ot her end must terminate with
a molded-on ty pe connector body, rated 10A,
250V, having standard CE E-22 female
configuration.

EN-780e

4

31MY02

Before You Operate the Monitor

Installing & Removing the Base

EN-780e

EN-780e

5

31MY02