Envirovent PROFILE–150S, PROFILE–150T, PROFILE–150HT Installation And Wiring Instructions

PROFILE-150

Installation and Wiring Instructions

PROFILE-150 AXIAL EXTRACTOR FANS

Suitable for kitchen applications

Thank you for placing your confidence in EnviroVent

by buying this product. It
has been manufactured in accordance with current safety regulations, production
and quality standards as laid down by the international Quality Standard ISO

9001. Please read this instruction booklet carefully before installing or operating
the product. It contains important information on personal and user safety
measures to be followed whilst installing, using and carrying out maintenance
work on the equipment. Once the product has been installed, please pass this
booklet to the end user.

Check that the product is in perfec t condition while unpacking. Any fault or
damage caused in origin is covered by the EnviroVent guarantee. Please make
sure that the product corresponds to the one you have ordered and that the
detail on the instruction label fulfil your requirements.

IMPORTANT:

BE SURE TO HAVE READ AND UNDERSTOOD THESE INSTRUCTIONS BEFORE
BEGINNING THE INSTALLATION PROCESS

S

AFETY AND RECOMMENDATIONS

•

All wiring must comply with Building Regulations and the current I.E.E. Wiring
Regulations (BS7671) or the equivalent standards for your country.
The

final installation should be examined and tested by a competent person.

This fan is I -X4

rated.

•

Do not install near sources of heat in excess of 40°C.

•

PPosition the fan at the furthest distance from the main source of air replacement in
the room in order to achieve maximum airflow performance.

•

This appliance is not intended for use by young children or infirm persons unless
they have been adequately supervised by a responsible person to ensure that they
can use the appliance safely. Young children should be supervised to ensure that
they do not play with the appliance.

INSTALLATION: PROFILE –150

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.2Fig.1

L

N

L

N

L

N

L

N

+

-

60

90

2

20

% Hr
60/90Hr60/90

t min
2/20

min

2/20

1

2

3

5