Page 1
Log #1
Log #3
Log #5
Log #2
Log #4
Rocks
LOG SET INSTALLATION GUIDE
E30 | E33
DRIF TWOOD
Important
The placement of the logs is not arbitrary. If they are positioned incorrectly, the
ames can be impinged and will not burn correctly. NOTE: The logs are fragile and
should be handled gently. Ensure you have all the elements shown below.
Page 2
Step 1
Follow instructions in your
owners manual to install liners
and burner media.
Step 2
Place Log #1 in the back towards
the back liner panel as shown
with both dowels facing up.
Step 3
Using a dowel on Log #1
position Log #2 as shown.
Step 4
Using the remaining dowel on
Log #1 position Log #3 across
from Log #2 as shown.
Log #1
Log #3
Log #2
Page 3
Step 6
Place Log #4 at the front of
the rebox touching Log #3.
Step 7
Place Log #5 at the front of
the rebox touching Log #2.
Your log set is now complete.
Step 5
At this stage you can distribute the numbered rocks in the pattern demonstrated above.
Log #4
15
6
7
4
19
Log #5
Page 4
enviro.com
C-15115
Visit www.enviro.com/mobile/DriftwoodLSG.html or scan the provided
QR code to watch an easy to follow step-by-step video guide on
setting up your new Enviro Driftwood log set.
Loading...