Page 1
AP200
AP200
owner's
guide
AP200-0906012
by
by
Page 2
TABLE OF CONTENTS
Thank you for purchasing the Allergy Pro™
200 air purifier. With True HEPA filtration
to purify the air, the Allergy Pro™ 200 air
purifier will greatly improve the quality
of the air in your home, office or other
environments. We want you to be fully
satisfied with your Allergy Pro™ 200.
That’s why your Allergy Pro™ 200 comes
with a one-year limited warranty.
Once you’ve experienced the purity of
Allergy Pro™ 200 air, visit us at our
website to find out more ways to improve
the quality of your air and your life with
our premium products and upgrades.
Please be sure to read the following
instructions carefully to ensure optimal
performance and safety.
www.envionproducts.com
SAFETY INSTRUCTIONS 2
PRODUCT BENEFITS 4
MAIN PARTS 5
OPERATING THE ALLERGY PRO
Getting Ready 6
Operation 7
Controls/Settings 8
™
200 AIR PURIFIER 6
MAINTENANCE 9
Filter Replacement 9
Cleaning External Surfaces 10
TROUBLE-SHOOTING 11
ONE-YEAR LIMITED WARRANTY 12
Allergy Pro™ by Envion, LLC
P.O. Box 9159
Van Nuys, CA 91409-8291
800.875.8577
by
ARBITRATION AGREEMENT 13
AP200
Page 3
2 3
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARNING: RISK OF ELECTRICAL SHOCK
Safety precautions should always be used when operating this or any electrical appliance.
Decrease the risk of electrocution, electric shock, injury or fire by reading and following all the
warnings below.
Use only as described in this Allergy Pro
not attempt to service the product in any way other than in the manner described in the
“Cleaning & Maintenance” section of this manual.
READ ALL INSTRUCTIONS BEFORE OPERATING THE AIR PURIFIER.
» This product operates at 120V AC, 60Hz only.
» Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar
coverings. Arrange cord away from traffic area and where it will not be tripped over.
» Do not operate the product in any greasy environment, such as in the kitchen. This product is
not intended to filter oil or grease from the air.
» Do not use the Allergy Pro
use near fireplaces or in areas where flammable or combustible vapors or products may exist.
™
200 air purifier in bathrooms or other humid environments. Do not
» Always unplug the power cord from the electrical outlet when the purifier is not in use, before
cleaning, inserting or removing parts or before moving to another location.
» Never run the air purifier unless it is fully assembled.
™
200 manual. To reduce the risk of electric shock, do
» Do not operate this product with a damaged cord or plug. Discard the product or return to an
authorized service facility for examination and/or repair.
» Never use the power cord to pick up, carry, drag, pull, or lift the Allergy Pro
not pull the cord against or around sharp corners and edges. This could result in injury to the
user or damage to the cord.
™
200 air purifier. Do
» Always remove the plug from its power outlet by holding onto the plug itself and pulling gently.
» Never pull on the cord itself to unplug it from its power outlet.
» Use care when operating the Allergy Pro
fingers, body parts, hair, loose clothing and jewelry away from openings.
» Never touch the Allergy Pro
» The Allergy Pro
operating the Allergy Pro
™
200 air purifier is an electrical appliance. Adult supervision is required when
™
200 air purifier or its plug when your hands are wet.
™
200 in the presence of children.
™
200 air purifier by keeping all foreign objects,
» To reduce the risk of fire or electric shock, do not use this air purifier with any solid-state speed
control devices.
» This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do
not attempt to defeat this safety feature.
» Always turn off all controls before unplugging the Allergy Pro
» Attempting to service the Allergy Pro
owner’s manual will cause the warranty to be voided and could cause serious personal injury
to the user and/or result in considerable damage to the unit.
™
200 air purifier in any way that is not described in this
™
200 air purifier from the outlet.
» Do not place the cord near a heated surface.
by
AP200 AP200
Page 4
4 5
PRODUCT BENEFITS
» Air purification:
1. True HEPA filter takes particles
out of the air, purifying it.
» Effectively removes smoke, pollen, dust,
animal dander, dust mites, mold and bacteria.
» 3 speed fan setting–lets you select the
desired cleaning level.
MAIN PARTS
1. Locking Latch
2. Air Inlet Grill
3. True HEPA Filter: Captures at least 99.7% of allergens and irritants that pass
through the filter down to 0.1 microns.
4. Control Dial: Off, HI, MED, LOW
5. Air Outlet Grill
1. Locking Latch
2. Air Inlet Grill
3. True HEPA Filter
4. Control Dial
5. Air Outlet
Grill
AP200 AP200
Page 5
6 7
OPERATING THE ALLERGY PRO™ 200
Before using the Allergy Pro™ 200 air purifier, please read the following important information.
Electrical Ratings:
• 120V Setting: 120Vac, 60 Hz
• Power consumption: 55 watts (0.5 ampere) at high fan speed,
• Net weight: 8.7 lbs
• Dimension (L x W x H): 8.8” x 6.9” x 25.5”
Replacement Parts:
Filter – AP200FA
Locate a level surface on which to place the Allergy
™
Pro
200 air purifier near a 120V outlet (follow
warnings in the “SAFETY INSTRUCTIONS” and
“IMPORTANT WARNINGS” sections of this manual).
Position your Allergy Pro
(12 inches) from the wall. Plug in the unit.
™
200 at least one foot
OPERATING THE ALLERGY PRO™ 200
Safety
1. Do not place near fans.
2. Keep both sides of the unit at least 1 foot away from a wall.
3 Do not place the unit near curtains.
4. Placing the unit close to the source of air pollution is an effective way to improve
indoor air quality.
1.
2.
3. 4.
Note:
DO NOT run the Allergy Pro
or a hole in it.
If the filter is damaged or needs replacement, please visit the Allergy Pro
www.envionproducts.com to order for a replacement filter. Or call 1.800.875.8577.
AP200 AP200
™
200 with a broken filter. Replace the filter if the filter has a tear
™
website at
Page 6
8 9
OPERATING THE ALLERGY PRO™ 200
CONTROLS/SETTINGS:
Power Control – To operate the Allergy Pro™ 200 air purifier, turn dial clockwise to turn on the air
purifier. Turn dial counter-clockwise to OFF position to turn the unit off.
Fan Speed Control – The Allergy Pro
LOW. Turn the control dial clockwise to your desired speed.
™
200 has three different speeds of cleaning, HI, MED and
MAINTENANCE
The Allergy Pro™ professional air purifier is almost maintenance free! Our true HEPA filter lasts up to
twelve months, depending on use and environment conditions. It is recommended to replace the
true HEPA filter every twelve months.
Before replacing the true HEPA filter of your Allergy Pro
unplug the unit from the electrical outlet and read all safety instructions and important warnings in
this owner’s manual.
Replacing the True HEPA Filter
1. Make sure unit is turned off and unplugged. Release the inlet grill by pressing on the locking
latch (see diagram of Main Parts).
2. Remove the inlet grill from the unit as shown below.
3 . Grasp the left and right frames of the True HEPA filter through the indentations
on the sides of the filter enclosure and remove the filter.
4 . Insert a new True HEPA filter, then snap the inlet grill back into position.
To Order A Replacement True HEPA Filter
The true HEPA filter should be changed every six months, simply contact our customer service
department at 1.800.875.8577.
The Allergy Pro™ replacement true HEPA filter part number is: TPP200FA
™
professional air purifier, turn off and
1.
2.
Control Dial
3.
AP200 AP200
4.
Page 7
10 11
CLEANING & MAINTENANCE
Cleaning External Surfaces
1. Turn off and unplug unit.
2. Use a washcloth slightly dampened with a little water and dishwashing soap
to wipe the outer case surfaces.
3. Do not allow water to slip into the internal parts as this could damage your unit
and result in electrical shock and injury to you.
4. Allow the unit to thoroughly dry before use.
TROUBLESHOOTING
PROBLEM REASON SOLUTION
Unit will not operate.
Reduced airflow or
poor filtering.
Control Dial not turned to
ON position.
Unit is unplugged.
The inlet grill has not been
installed & locked into place.
The inlet or outlet grill may
be blocked.
True HEPA filter may
be clogged.
Turn the Control Dial
clockwise.
Check to ensure unit
is plugged in.
Check to make sure filter
is properly installed & locked
into place.
Check to ensure nothing is
blocking air inlet & air outlet.
Replace with a new True HEPA
filter, if necessary.
AP200 AP200
Page 8
12 13
ONEYEAR LIMITED WARRANTY
ONE YEAR LIMITED WARRANTY
Your
Allergy Pro™ air purifier
for one year from the original purchase date. Should the product have a defect in materials or
workmanship, we will repair or replace it without charge to you (a shipping and processing fee
will apply). To obtain service under warranty, simply call our customer service center toll-free at
800.875.8577
.
This warranty does not cover damage caused by accident, misuse or any use other than as intended
and described in this product manual, or damage resulting from failure to maintain and clean this
product as specified in this product manual. This warranty applies only to the original purchaser of
the
Allergy Pro™ air purifier
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION
TO THE WARRANTY PERIOD, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THIS PERIOD.
Some states do not allow limitations on the duration of implied warranties, so the above limitation
may not apply to you. While this warranty gives you specific legal rights, you may also have other
rights which may vary from state to state.
Contact Info for Warranty Service:
Allergy Pro
™
by Envion LLC
P.O. Box 9159 | Van Nuys, CA
1.800.875.8577 | www.envionproducts.com
© 2012 Envion, LLC. All Rights Reserved. Patents pending.
The energy efficiency of this ENERGY STAR qualified
model is measured based on a ratio between the
model’s CADR for dust and the electrical energy it
consumes, or CADR/Watt.
is warranted to be free from defects in materials and workmanship
.
| 91409-8291
ARBITRATION AGREEMENT
PLEASE READ THIS AGREEMENT CAREFULLY. YOU ACCEPT THE TERMS OF THIS AGREEMENT BY RETAINING THE
PRODUCT(S) SHIPPED IN CONNECTION WITH THIS AGREEMENT (THE “PRODUCTS”) FOR MORE THAN THIRTY (30)
DAYS AFTER RECEIPT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU MAY RETURN THE PRODUCT TO
COMPANY WITHIN THIRTY (30) DAYS OF RECEIPT FOR A FULL REFUND.
THIS ARBITRATION AGREEMENT (“AGREEMENT”) AFFECTS YOUR LEGAL RIGHTS AND REMEDIES BY PROVIDING THAT
DISPUTES BETWEEN YOU AND THE MANUFACTURER, DISTRIBUTOR AND/OR SELLER OF THIS PRODUCT (COLLECTIVELY,
“COMPANY”), MUST BE RESOLVED THROUGH BINDING ARBITRATION AND NOT IN COURT. IT ALSO PROVIDES THAT
ANY DISPUTE CANNOT BE RESOLVED IN A CLASS ACTION OR OTHER PROCEEDING WHERE YOU REPRESENT OTHER
PERSONS OR OTHER PERSONS REPRESENT YOU, AND THAT NO CLASS OR REPRESENTATIVE ARBITRATIONS ARE
PERMITTED. PLEASE CAREFULLY READ ALL TERMS IN THIS AGREEMENT.
1. RESOLUTION OF CLAIMS OR DISPUTES.
Any claim or dispute between you and Company (or any of Company’s subsidiaries or affiliates) arising out of
or relating in any way to the Product or this Agreement shall be resolved through final, binding arbitration. This
arbitration obligation is reciprocally binding on both you and the Company and applies regardless of whether the
claim or dispute involves a tort, fraud, misrepresentation, product liability, negligence, violation of a statute, or any
other legal theory. Both you and Company specifically acknowledge and agree that you waive your right to bring a
lawsuit based on such claims or disputes and to have such lawsuit resolved by a judge or jury.
2. LIMITATION OF LEGAL REMEDIES.
All arbitrations under this Agreement shall be conducted on an individual (and not a class-wide) basis, and an
arbitrator shall have no authority to award class-wide relief. You acknowledge and agree that this Agreement
specifically prohibits you and the Company from commencing arbitration proceedings as a representative of
others or joining in any arbitration proceedings brought by any other person. The parties agree that no class or
representative actions of any type are permitted.
3. ARBITRATION PROCEDURES.
a. Before instituting an arbitration, if you have any dispute, we strongly encourage you to contact the Company to
try to resolve the matter by calling 800.218.3560, although you are not required to do so.
b. The arbitration of any claim or dispute under this Agreement shall be conducted in accordance with the
expedited procedures set forth in the JAMS Comprehensive Arbitration Rules and Procedures as those Rules exist
on the date you receive the Product, including Rules 16.1 and 16.2 of those Rules. These rules and procedures are
available by calling JAMS or by visiting its web site at www.jamsadr.com. The arbitration of any claim or dispute
under this Agreement shall be conducted by an arbitrator who has at least five years of experience conducting
arbitrations.
c. The arbitration of any claim or dispute under this Agreement shall be conducted in the State of California or
the location in which you received this Agreement. For claims of $10,000 or less, you may choose whether the
arbitration proceeds in person, by telephone, or based only on submissions.
d. The Company shall pay costs for the arbitration of claims, including any JAMS Case Management Fee and all
professional fees for the arbitrator’s services. The Company shall pay the fees and costs of its own counsel, experts
and witnesses and shall not be able to recoup them from you even if you do not prevail in the arbitration. Unless
otherwise provided by law, you acknowledge and agree that you shall pay the fees and costs of your own counsel,
experts and witnesses.
4. CHOICE OF LAW.
The arbitration provisions of this Agreement and any arbitration conducted pursuant to the terms of this Agreement
shall be governed by the Federal Arbitration Act (9 U.S.C. Secs. 1-16). In this respect, the parties acknowledge that
this Agreement involves a transaction conducted in interstate commerce. Otherwise, this Agreement and the rights
of the parties hereunder shall be governed by and construed in accordance with the laws of the State of California,
exclusive of conflict or choice of law rules.
5. SEVERABILITY.
If any provision of this Agreement is declared or found to be unlawful, unenforceable or void, such provision will be
ineffective only to the extent that it is found unlawful, unenforceable or void, and the remainder of the provision
and all other provisions shall remain fully enforceable.
by
AP200 AP200
Loading...