Storm 8
8-Port, multi-protocol Ethernet-to-DMX gateway
Introducing Storm 8, the world’s most powerful 8-port Ethernet to DMX512 converter.
With the ability and speed to handle large amounts of DMX over Ethernet data, it is ideal for any pixel-
mapped LED project or traditional rigs.
Through its eight RJ45 DMX ports, Storm 8 supports multiple protocols and can be congured using a
new, easy-to-use interface on any web browser thanks to the built-in web-server.
DISCLAIMER: While all due care has been taken, this brochure is for general marketing purposes only and should not be relied upon as being complete or accurate.
enttec.com
MELBOURNE AUS / LONDON UK / HILLSBOROUGH NC, USA
Storm 8
Compact yet powerful!
Controls . Lights . Solutions
Features
▶
● Web-based conguration.
● Supports Art-Net, sACN, and ESP.
● Supports either LTP or HTP Merging
(upto 2 sources).
● Supports DMX512/1990.
● Refresh rate is congurable for each
DMX output.
● Each DMX output can be assigned
up to one Ethernet Universe.
● Choose Static or Dynamic (DHCP)
IP conguration (DHCP by default).
Hardware
▶
● 8 DMX (RJ45) data output ports.
● IEC power connector.
● 10/100 Ethercon RJ45 Ethernet.
● Fits into a robust metal 9.5 inch single
unit rack.
● Two units can be mounted side by
side to form a standard 19-inch rack.
● In-built power supply (input 90 to
260V AC).
● Multi-colour RGB status LED.
Applications
▶
● University/professional theatres.
● Architectural installations.
● Touring companies/roadhouses.
● Performing Arts venues.
● Trade shows.
Easy cabling
▶
Easier and lower cabling costs using
standard RJ45 outputs. Although
XLR connectors are widely used in
the entertainment world, when your
project isn’t traveling the world on
a regular basis, RJ45s connectors
offer the best price / performance ratio. Using standard
shielded CAT5 cable to connect your whole system also
helps keep the cost per port down. We use the standard
ANSI E1.27-2 specied RJ45 pinout to make sure most
equipment connections will be simple.
Dimensions
L191mm/7.53” W105mm/4.14” H44.5mm/1.75”
PART NUMBERS
70055 - Storm 8
Recommended Apps
▶
● D-Pro
D-PRO 2U is a software-based lighting
controller which plays well with a host of
different professional level hardware devices
from ENTTEC. It has plenty of advanced
features for the most demanding lighting
professional applications. Includes D-PRO
Player, a touchscreen-friendly interface to
easily control your cues. An OSC controller
(such as TouchOSC) can also be used to
remotely control D-Pro. Windows and Mac
OSX compatible.
70053 - DMX XLR-5 (Female) to RJ45 (Male) 1m cable
70050 - Storm 24
● ELM (ENTTEC LED MAPPER)
ELM provides total control over your LED
system, regardless of shape and size.
Design your layout with vector-based
objects for maximum precision and
exibility. Load the media of your choice and
begin playback as needed.
Supports Spout and NDI. Supports RGB,
RGBW, RGBA, RGBAW/RGBWA and White
xtures.
Loading...