
ENT
TEC
Aleph CV LED
Tape Driver
Drive your LED tape
Drive your LED tape/strip with the CV driver. A powerful 250W power supply and driver in one allows you drive up
to 25 meters of 24V LED strip from a single unit without needing extra wiring.
DISCLAIMER This brochure is for general marketing purposes only and should not be relied upon as being complete or accurate.
www.enttec.com
ENTTEC HEAD OFFICE
17/5 Samantha Court
Knoxfield VIC 3180 Australia
Tel : +61 3 9763 5755
Fax : +61 3 9763 5688
sales@enttec.com
ENTTEC AMERICAS
604A Cornerstone Ct.
Hillsborough NC 27278 USA
Tel & Fax : (888) 454-5922
sales.americas@enttec.com
Controls . Lights . Solutions
ENTTEC EUROPE
Unit B23, Parkhall Business Centre
40 Martell Road, Dulwich London
Se21 8EN UK
sales.europe@enttec.com

ENT
TEC
Aleph CV LED Tape Driver
The complete solution for driving LED tape
www.enttec.com
► Features
All in one driver power supply
& dimmer
Simple 120-240V AC input
DMX512 controllable and RDM
configurable
Compatible with all 24V strips
White, CTA, RGB, RGBW
Smallest size only 42mm wide
► Wiring
► Accessories
Advanced heat management
Isolated DMX input
5 Amps per channel output
250 watts total output power
Fused outputs
Power and status LEDs
Standard 19" rack mount unit
using 8 Way mounting
The modular rack allows up to 8 Aleph CV units to be
stacked up using only 3 standard rack units (3RU). Also
has an in-built fan at the rear side.
The converter from 4 pin XLR to screw terminal allows
easy installation by using a
flat screw driver, avoiding the
need of wiring and soldering.
► RDM
The Aleph1 CV Driver has full RDM capabilities, that
means you can configure the driver remotely and
softpatch channels to any address you need. The ENTTEC
RDM controller software can be downloaded for free
from ENTTEC website and be used in combination with a
USB Pro, RDM USB Pro or a DMX USB Pro Mk2 widget.
PART NUMBERS
73520 - 24V CV Driver
73522 - 12V CV Driver
73530 - Stackable modular rack
73526 - Screw terminal output
► Dimensions