Entrelec MA 2, M 4/6.P, M 4/6.3A.P Catalog Page
T01120 001229
How to connect ground terminal blocks electrically to the mounting rail
DIN 3 rail
Screwdriver
Movable
foot ensures
positive
connection
to the rail
1. Position the block on the mounting rail
Ground terminal blocks
electrically connected to
the mounting rail
Compression clamp
DIN 1 - 3
2
1
DIN 1 rail
2. Screw down the center of the block
to tighten the movable foot on the rail
Blocks can slide on the rail before tightening.
MA 2,5/5.P M 4/6.P M 4/6.3A.P
Spacing 5 mm + 0,08 .200" Spacing 6 mm + 0,05 .238" Spacing 6 mm + 0,05 .238"
R
Characteristics
Wire size
Short circuit current
Rated wire size / Gauge
Compression Solid wire
clamp
Stranded wire
Other characteristics
Approvals
Accessories
1 End section yellow
2 Separator end section grey
On rail : Recomm.screwdriver/Recomm.torque
R See markers
78
yellow
marking method
Type
Green-yellow Green-yellow Green-yellow - UL 94 V0
MA 2,5/5.P 0165 488.27
MA 2,5/5.P.V0 0195 488.16
Terminal block for ground wire, same size
as MA 2,5/5 terminal block.
IEC
NFC-DIN
0,2-4 mm² 24-12 AWG 24-12 AWG
0,22-2,5 mm²
300A/1s
2,5 mm²/A3 12 AWG 12 AWG
Wire stripping Recomm. Recomm. Protection
length screwdriver torque
10 mm 3.5 mm 0,4-0,6 Nm
.39" .14"
UL CSA
24-12 AWG 24-12 AWG
Type
FEM6 2,8 mm 0103 062.21
FEM6 V0 2,8 mm 0199 305.02
SCF6 3 mm 0118 707.03
10 12
th.
th.
th.
3,5 mm .14" / 0,6 Nm 5.5 lb.in
Part number
3.5-5.3 lb.in
Part number
Type
MA 4/6.P 0165 113.16
MA 4/6.P.V0 0195 113.05
Terminal block for ground wire, same size
as M 4/6 terminal block.
IEC
NFC-DIN
0,2-4 mm² 24-10 AWG 24-10 AWG
0,22-4 mm² 24-10 AWG 24-10 AWG
480A/1s
4 mm²/A4 10 AWG 10 AWG
Wire stripping Recomm. Recomm. Protection
length screwdriver torque
9,5 mm 4 mm 0,5-0,8 Nm
.37" .16"
UL CSA
Type
FEM6 2,8 mm 0103 062.21
FEM6 V0 2,8 mm 0199 305.02
SCF6 3 mm 0118 707.03
11 12
th.
th.
th.
4 mm .16" / 0,8 Nm 7.0 lb.in
Part number
4.4-7 lb.in
Part number
Type
M 4/6.3A.P.V0 0195 637.12
Terminal block for ground wire, same size
as M 4/6.3A terminal block.
IEC
NFC-DIN
0,2-4 mm² 22-10 AWG 12 AWG max.
0,22-4 mm² 22-10 AWG 12 AWG max.
480A/1s
4 mm²/A4 10 AWG 12 AWG
Wire stripping Recomm. Recomm. Protection
length screwdriver torque
9,5 mm 4 mm 0,5-0,8 Nm
.37" .16"
UL CSA
Type
FEM3AP V0 3 mm 0199 876.26
11 12
green th.
4 mm .16" / 0,8 Nm 7.0 lb.in
Part number
4.4-7 lb.in
Part number
Loading...