Entone remote, NEP DATASTREAM REMOTE Quick Start Manual

2

3

datastreamnep

datastreamnep

remote Guide //

QUICK START

Manual Program Remote for Television

Auto Program Remote for Television

Program NEW Remote to Control STB

1. Visit www.nep.net/remote to download TV codes or locate your
TV type and make in the TV Codes pamphlet or pdf.

2. Turn on TV.

3. Hold down the TV button until it lights up and stays lit.

4. Type in a 4 digit code from the TV Codes pamphlet or pdf.
a. Test Volume - press volume up and down
b. Test Power - press Blue Power button at the top of remote
If either test fails go to next code in TV Codes pamphlet/pdf.

If HD codes do not work locate and test SD codes.

5. Once a working code is found hit the STB button to be sure you
can control the Set Top Box.

6. Write working code here for future access:

1. Turn on TV.

2. Hold down the TV button until it lights up and stays lit.

3. Press the Blue Power button once aiming the remote at TV.

4. Press either the Channel Up or Channel Down to start Auto Scan.

5. Auto Scan will test a Code in 5 second intervals. The TV button
will blink everytime a new code is tested. This can take up to

15 minutes to complete.

6. If / When the TV turns off press the OK button on the remote to
lock in the code.

If all codes have been tested and the OK button was not pressed
the TV key will blink 7 times and Auto Scan will be terminated.

1. Program Remote for TV rst. See options above.

2. Hold down the STB button until it lights up and stays lit.

3. Press the Blue Power button once aiming the remote at the
Set Top Box.

4. Press the Number 1 button. Remote will be programed to work
that Set Top Box.

www.nep.net

3

2

4

4

6

5

3

4

datastreamnep

datastreamnep

remote Guide //

www.nep.net

DEVICE SELECTION

Press to control

your TV, STB, or

Auxiliary Device

PLAYBACK CONTROLS

Control playback of

DVD or DVR

DVR & LIVE TV

Press DVR to use

the DVR functions,

and press LIVE TV to

return to live TV from

viewing a recording

ASPECT RATIO SETTINGS

Change TV’s aspect

ratio or switch from

SD to HD

OK

Enter a choice you

have selected

BACK

Return to the previous

selection / screen

VOL + / -

Adjust volume

MUTE

Toggle audio on/off

NUMBER PAD

Enter a channel

number or PIN

INPUT

Choose between TV

connections

POWER

Turn a selected device
on or off

RECORD

Begin recording

CALLER ID

Press for On Screen
Caller ID Log

VUDU

Press to activate Vudu
Movies & Apps

MENU

Display main menu

INFO

Display information
about the current
program

ARROW KEYS

Move the highlight in
menu screens

EXIT

Exit current menu

GUIDE

Display the guide

CH/PG UP/DOWN

Change the channel
or move guide up or
down an entire page

LAST

Return to the previous
channel

CC

Toggles Closed
Captioning on/off

Entone Remote Overview

QUICK START