How it Works
Entone
Loading...
Kamai 500
Quick Start
8 pgs403.97 Kb2
Specification Sheet
4 pgs301.29 Kb0
User Manual
9 pgs1.14 Mb0

Entone Kamai 500 User Manual

Download
Page 1
Kamai
Hybrid TV media Player
500 Series Product Manual
®
Page 2
Table of Contents
OVERVIEW
2 What’s Included 4 Front and Rear Panel 5 Side Panel
COPYRIGHT ©2012 Entone, Inc. All rights reserved. This document contains proprietary information protected by copyright. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of Entone, Inc., 20863 Stevens Creek Blvd, Suite 300, Cupertino, CA 95014, U.S.A.
DISCLAIMER IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE PERMISSION FROM THE COPY­RIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR OTHER REMEDIES.
CONNECTING VIDEO
6 High-Denition TVs 7 Standard-Denition TVs
CONNECTING AUDIO
8 Stereo 9 Surround Sound
CONNECTING TV SOURCE
10 Cable or Antenna
CONNECTING NETWORK
11 Wireless or Wired
POWERING UP
12 Setting up Remote Control 13 Connecting to Power Source
TRADEMARKS Entone and the tagline “Connecting the Home” are trademarks of Entone, Inc. All other trademarks or registered trademarks belong to their respective owners.
CHANGES The material in this document is for information only and is subject to change without notice. While rea­sonable eorts have been made in the preparation of this document to assure its accuracy, Entone, Inc. assumes no liability resulting from the use of the information contained herein. Entone, Inc. reserves the right to make changes in the product design without reservation and without notication to its users.
P/N: 99-708808-02 - V1.1
1
Page 3
PRODUCT MANUAL

What’s Included

DIN-to-RCA Cable
Kamai Hybrid TV Media Player
IR Remote Control*
2 Batteries for
Remote Control
Kamai Product Manual Remote Control Guide*
PRODUCT MANUAL
Ethernet Cable (Optional)
HDMI Cable (Optional)
AC Power Adapter*
Additional items that may be required (not included):
• Ethernet Cable
• HDMI Cable
• RF Coaxial Cable
• Digital Audio Cable
• Network Router
*The Remote Control may vary and is dependent on your service provider. *The AC Power Adapter may vary and is dependent on your service provider.
32
Page 4
Kamai — Front and Rear Panel
Kamai — Side Panel
PRODUCT MANUAL
1
2
Name Description
Power Indicator Solid blue indicates the unit is on
1
Antenna/Cable
2
Connector
Digital Audio S/PDIF digital optical audio TOSLINK output
3
SD Video 9-Pin DIN conector for connecting to video output us-
4
HDMI Digital video and audio port for connecting to a high-
5
Ethernet RJ45 plug for connecting to ADSL modem or network
6
Power DC power jack (100-240V, Output 12V/1A)
7
3 3
4
Flashing blue indicates the unit is starting up
IEC/F port for connecting to cable / antenna source (tuner is optional item)
ing DIN-to-RCA cable
denition TV (HDTV)
access equipment
5
6
7
1
Name Description
Factory Reset Reset the device to factory settings with a thin metal
1
SD Card Reader SD Memory Card Reader
2
USB To connect USB devices such as USB Flash Drive and
3
probe
For accessing media on an SD memory card
External Hard Drive (max 500mA load)
2
PRODUCT MANUAL
Availability of certain features is dependent on your service provider. Availability of certain features is dependent on your service provider.
54
Page 5
PRODUCT MANUAL
STEP 1: CONNECTING VIDEO
Kamai provides two video options for connecting to your TV: HDMI or Composite Video. Select a video option and proceed accordingly.
Make sure your TV is turned on and the correct video input is selected.
Option 1: HDMI (Recommended)
If your TV has an HDMI connection, use an HDMI cable (may not be included) and connect Kamai to the HDMI IN port on your TV. This con­nection provides both video and audio so you do not need a separate audio connection. Proceed to “Connecting TV Source” on page 10.
Delivers the best video & audio quality via a single cable
Option 2: Composite Video
Use the DIN-to-RCA cable provided and connect the yellow cable to the
Composite Video
Delivers good picture quality
yellow VIDEO IN port on your TV. Then proceed to the next step (“Con­necting Audio”) to connect the red/white cables.
If you have already selected HDMI as your video connection, then do not use this cable.
PRODUCT MANUAL
Cable is optional and may not be included
S-VIDEO
S-VIDEO
Cable included
76
Page 6
PRODUCT MANUAL
STEP 2: CONNECTING AUDIO
Kamai has two audio options: Stereo or Surround Sound. Se­lect an audio option and proceed accordingly.
NOTE: If you have already selected HDMI as your video con­nection, then skip this audio section and proceed to “Connect­ing TV Source”.
Option 2: Surround Sound
If your TV is connected to an A/V Receiver that supports Dolby Digital 5.1 Surround Sound, use a digital audio cable (sold separately) to connect Kamai to the OPTICAL AUDIO IN port on your A/V Receiver.
Option 1: Stereo
Use the DIN-to-RCA cable provided and connect the red/white cables to the AUDIO IN port on your TV.
Cable included
PRODUCT MANUAL
Cable not included
S-VIDEO
98
Page 7
STEP 3: CONNECTING TV SOURCE
STEP 4: CONNECTING NETWORK
PRODUCT MANUAL
Connect an RF coaxial cable (sold separately) from Kamai to either a basic unencrypted Cable TV source or antenna source.
NOTE: A built-in tuner for receiving o-air programs is an op­tional feature of Kamai. Contact your service provider for more details.
Select from one of the following networking options.
Option 1: Wireless
Connect your Kamai to a Wireless Network Router or Access Point.
NOTE: Internal Wi-Fi is an optional feature for Kamai. Contact your service provider for more details and instructions about the wireless network conguration.
Option #2
Connect an Ethernet cable (sold separately) from Kamai to a cable/DSL modem or Network Router.
PRODUCT MANUAL
Cable not included
Cable is optional and may not be included
Router not included
1110
Page 8
PRODUCT MANUAL
STEP 5: POWERING UP

Setting Up Remote Control

1. Open the battery cover by pressing down on the battery cover latch and sliding it o.
2. Insert the batteries, matching the “+” and “-” marks on the batteries with the interior of the remote control.
3. Snap on the battery cover to close.

Connecting to Power Source

1. Connect the power cord to the POWER port on the back of the Kamai.
2. Plug the AC power adapter to a power outlet.
3. Follow the on-screen instructions.
NOTE: Make sure your TV is turned on and the correct video input is selected.
NOTE: Refer to the Remote Control Guide for more details about other remote control features.
PRODUCT MANUAL
1312
Page 9
®
©2012 Entone, Inc. Entone, Kamai and connecting the home are trademarks of Entone, Inc. Other company, product, and service names may be trademarks or service marks of others. All information contained in this document is subject to change without notice. Information contained in this document is provided on an as is basis. In no event will Entone be liable for damages arising directly or indirectly from any use of the information contained in this document. Subject to change without notice.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use