Enterasys Networks 1G587-09 User Manual

Matrix E1™1G587-09
Gigabit Distribution Switch

• 6 Gigabit Ethernet ports via mini-GBICs with three modular expansion
slots for copper or fiber Fast and Gigabit Ethernet

• Line-rate performance to support bandwidth-intensive applications

• Standards-based switching and routing support

• Superior Quality of Service (QoS) and industry-leading security

• Mixed fixed-modular
platform

— 6 Gigabit Ethernet ports

via mini-GBICs with 3
modular expansion slots

— Up to 12 fiber Gigabit

Ethernet or half
copper/half fiber Gigabit
Ethernet configuration

• Line-rate performance

— 24 Gbps switching

capacity; exceeds 16
Mpps switching and
routing throughput

• Switching and routing
support

— Spanning Tree; Rapid

Reconfiguration Spanning
Tree; IEEE 802.1Q VLANs

— IPv4 Routing with RIP,

OSPF and VRRP; IP
Multicast with IGMP and
DVMRP; Link
Aggregation; Port
Mirroring

• Superior Quality of Service

— IEEE 802.1p with 4 hard-

ware priority queues/port

— Layer 2, 3, 4 traffic classi-

fication

— Hardware-based rate lim-

iting; ToS rewrite support

• Simplified management

— CLI or embedded web

server; NetSight; RMON

— SNMPv3, Telnet Access

via SSHv2

• Industry-leading security

— 802.1X and MAC-based

authentication, MAC­based port locking and
RADIUS

— DoS prevention and

enhanced ACL support

Page 1 of 4 • Data Sheet

Multilayer, “Fixed-Modular”
Switch for Enterprise Wiring
Closet Aggregation

Ideal for networks that require high­performance, high-bandwidth connec­tions and robust multilayer features, the
Matrix E1 Gigabit Distribution Switch
(GDS) can handle the demanding require­ments of bandwidth-intensive enterprise
applications such as videoconferencing,
distance learning, enterprise resource
planning, and disaster recovery as well as
simultaneous intranet and Internet con­nectivity—all at wire speed.

Whether you’re upgrading the network
infrastructure or expanding at the distri­bution layer, the Matrix E1 GDS is ideally
suited for wiring closet aggregation or for
small to mid-sized network backbones.
Wire-speed performance and industry­leading features allow seamless integration
into any small or medium business, or
large enterprise network.

The Matrix E1 GDS is a 6-port Gigabit
Ethernet switch with three expansion
slots, which accept a variety of copper
and fiber Fast and Gigabit Ethernet
expansion modules. All feat ures and
functionality are supported on all ports,
and any combination of expansion modules
may be installed in the base system.

The Matrix E1 GDS performs Layer 2 –
Layer 4 packet classification, providing
control at the application, port and user
levels. With this degree of traffic manage­ment, advanced services such as security
and prioritization can be used to optimize
the network.

The Matrix E1 GDS ships with full Layer
2 and Layer 3 switching capabilities without
additional cost. This routing support
enables the Matrix E1 GDS to improve
overall network functionality, reliability,
security and performance from the edge to
the distribution/core of the network.

Superior Security

With built-in security—authentication,
encryption and preven tive features—
the Matrix E1 is set apart from its compe­tition. From MAC address authentication
and MAC port locking to RADIUS and
IEEE 802.1X authentication support and
DoS prevention, the Matrix E1 allows
networks to effectively filter out unautho­rized users and applications.

Inherent Flexibility

The flexibility of a mixed fixed-modular
platform can easily match network media
preferences, whether fiber Fast Ethernet,
high-density copper 10/100 or triple­speed 10/100/1000. The Matrix E1 GDS
also supports a variety of fiber Gigabit
Ethernet expansion modules.

Flexibility also means the physical
resiliency of dual integrated power sup­plies, as well as the virtual resiliency of
standards-based switching and routing
failover firmware features such as Spanning
Tree (802.1D), Rapid Reconfiguration
Spanning Tree (802.1w) and VRRP. The
physical and logical redundancy make the
Matrix E1 GDS the ideal solution for mis­sion-critical networks.

Leading Management

Managing security and flexibility—
whether by inbound or out-of-bound man­agement techniques—allows network
administrators to control all the features
and functionality of the Matrix switch.
From SSH encrypted Telnet management
to the full suite of NetSight

T M

Atlas network
mana geme nt applications, Matrix E1
multilayer switches are easy to install,
implement, maintain and troubleshoot.

Specifications

Technical Specifications

Switching Mode

Store and forward

Switching Bandwidth

24 Gbps

Routing Throughput

16 Mpps

MAC Address Capacity

64,000

VLAN Capacity

4,094

Flash Memory

8 MB

DRAM

64 MB

Power System

AC Input Power (auto-sensing)

85 VAC – 264 VAC

Heat Dissipation

156 BTU/hr maximum

ACVA Rating

50 ACVA maximum

System LED Indicators

Power Supply Status

CPU Status

Port Status (link and activity)

System MTBF

>121,000 hours predicted

Media Type Supported

Base System

1G587-09: 6 mini-GBIC ports, 3 expansion slots

Expansion Modules

1H-8FX: 8 100Base-FX MTRJ ports
1H-16TX: 16 10/100 RJ45 ports
1G-2TX: 2 10/100/1000 RJ45 ports
1G-2MGBIC: 2 Mini-GBIC slots

Management Access

In band: SNMP, HTTP, Telnet, SSH

Out of band: Serial RS-232 COM port

Physical Specifications

Dimensions

8.9 cm (3.5") H x 44.45 cm (17.5") W x 43.9 cm (17.3") D

Rack Unit Height

2

Weight

8.75 kg (19.23 lb)

Environmental Specifications

Operating Temperature

5° C to +40° C (41° F to 104° F)

Non-Operating Temperature

-30° C to 73° C (-22° F to 164° F)

Operating Humidity

5% to 90% RH, non-condensing

Agency and Standards Specifications

Safety

UL 60950, CSA 60950, EN 60950, EN 60825 and IEC 60950

Electromagnetic Compatibility

47 CFR Parts 2 and 15, CSA C108.8, EN 555022, EN
55024, EN 61000-3-2, EN 61000-3-3, AS/NZS CISPR 22,
and VCCI V-3

IEEE Standards

IEEE 802.3
IEEE 802.1D
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1w
IEEE 802.1X

Page 2 of 4 • Data Sheet