User Guide – RP500 Series
Professional compact repeater base station
v10/10
Common Information
RP510/520/580/580-U
Table of Contents
Common Information Page
Certification 2
Radio care / First Time Use 3
Packing List / Optional Accessories 4
Preparing the Base Station for use 5
RP500
Feature List 6
Controls & Indicators 7 & 8
Feature Operation 9
Troubleshooting Guide 10
Introduction
This guide covers the ‘basics’ of your base station operation. To meet your exact
requirements the radio may have been customised by your Entel authorised
dealer. These features will be explained in a separate guide issued by the dealer.
1
Common
Common
Certification
Declaration of Conformity
2
We Entel UK Limited of:
320 Centennial Avenue
Centennial Park
Elstree
Borehamwood
Hertfordshire
WD6 3TJ
United Kingdom
Declares under our sole responsibility that the product range:
RP500 Series Base Station Transceiver
Conforms to the following standards or other nominative documents:
• EN 300 086-2 V1.2.1, EN 301 489-1 V1.8.1: 2008-04, EN 301 489-5 V1.3.1: 2002-08,
EN 60950-1:2006, in accordance with Directive 99/5/EC.
Serial Number ________________________________
M Austin
Quality Manager
1 October 2010
Date:
3
Common
Warranty
The RP5XX comes with a 12 month warranty,
for details see our full terms & conditions.
Advice
• Do not use options or accessories not
specified by Entel
• Ensure that the radio is used within the
parameters for which it was designed
• Keep dry, do not use in high humidity areas
Warning
• Disconnect from the mains before fitting
any accessories or removing any cover
Do not install the transceiver in the following
locations:
• In explosive atmospheres (flammable gas,
dust including metallic & grain powders
etc)
• Near explosives or blasting sites
Caution
• Do not disassemble or modify the
transceiver for any reason
• Do not transmit without an antenna fitted,
be aware the base station will automatically
transmit when talk-through is enabled
• Do not transmit while touching the
antenna terminal or any exposed metallic
parts of the aerial as this may result in a
burn
• Do not obstruct the fan/vents
• Always replace fuses with the same rating.
Never fit a fuse of a higher rating. Replace
the fuse only after investigating and
correcting the cause of the blown fuse
End of Life Disposal
• When your Entel transceiver reaches the
end of its useful life, please ensure that the
unit is disposed of in an environmentally
friendly way.
For country specific information please see
www.entel.co.uk/recycling/index.htm.
Radio Care
Loading...