Ensa WM3431xx Service Manual

9. DISASSEMBLY INSTRUCTIONS

󳢬

Be sure to unplug the machine from the outlet before disassembling and repairing the parts.

① Unscrew 2 screws on the back of the top plate.
② Pull the top plate backward and upward as

shown.

③ Disconnect the Display PWB Assembly

connector from Flat cable.

④ Pull out the drawer and unscrew 2 screws.
⑤ Push 2 upper hooks and pull the Control Panel

Assembly forward.

⑥ Unscrew the 6 screws from the Control Panel

Assembly.

⑦ Disassemble the Display PWB Assembly.

PANEL ASSEMBLY(CONTROL)

Hook

CONTROL PANEL

PLATE ASSEMBLY(TOP)

29

PWB ASSEMBLY(DISPLAY)

30

① Unscrew the 4 screws from the back cover.
② Unscrew the 2 screws from the lower-left

side of the cabinet.

③ Disconnect the connectors.
④ Disassemble the Main PWB Assembly in

arrow direction.

① Disassemble the Top plate assembly.
② Pull out the drawer.
③ Unscrew the 2 screws and push out the

dispenser assembly.

④ Disassemble the clamps and hoses.
⑤ Disassemble the bellows at the lower side of

the dispenser.

PWB ASSEMBLY(MAIN)

DISPENSER ASSEMBLY

DISPENSER ASSEMBLY

DRAWER

31

① Disassemble the 4 connectors from the valves.
② Unscrew the 2 screws from the back of the

cabinet.

󳢮Wire color

2

1

3

4

INLET VALVE

VALVE 󳡉(DRY) YL - BK
VALVE 󳡊(BLEACH) GY - BK
VALVE 󳡋(MAIN WASH)

WH/ - BK

VALVE

󳡌

(HOT)

BL - BK

① Open the door.
② Unscrew the 2 screws from the Cabinet Cover.
③ Disassemble the door upward.

※ When removing the Door Assembly, it is

necessary to hold the Bracket that is inside of
the Cabinet Cover.

Drain in to bucket by pulling out hose and
removing cap.

CAP (REMAINING HOSE)

DOOR

Method of removing remaining water