Ensa LDS5811 Service Manual

7. HOW TO DISASSEMBLE

Lower Felt

Lower Cover

BEFORE DISASSEMBLING THE DISHWASHER ;

1) Remove the cord from electric outlet to avoid electric shock.

2) Close the Water Tap (faucet).

3) Remove all dishes and items in the dishwasher.

4) Remove the Lower Rack and the Upper Rack.

5) Remove the inlet hose and drain hose connetion to avoid the hose damages.

6) Prepare some towels to avoid floor wet by the water left in the dishwasher.

7-1. FULL DISASSEMBLE

1. Lower Cover and Lower Felt

1) Remove the front 2 screws.

2) Pull the Felt.

3) Remove the Inlet Hose and Power Supply
Cable.

Cabinet-L

Tub Felt

2. Cabinet and Tub Felt

1) Cabinet-R

Remove front 2 screws.
Remove rear 3 screws.

2) Cabinet-L

Remove front 2 screws.
Remove rear 3 screws.

3) Tub Felt

Cabinet-R

- 16 -

Control Panel Front Cover

F

3-1. Door Assembly

(LDF7811/7810 Series)

1) Front Cover

Open the door.
Remove 12 screws(stainless).

2) Control Panel Assembly

Remove 2 screws(Stainless).

Remove the wire connections.

Be sure the wiring should not be
changed in reassembling

Remove the Latch assembly.
Remove the Front Display.
Remove 8 screws for Controller.

Controller

ront Display

Latch Assembly

Controller

- 17 -

Control Panel Front Cover

3-2. Door Assembly

(LDF 5811 Series)

1) Front Cover

Open the door.
Remove 6 screws(Stainless).

2) Control Panel Assembly

Remove 8 screws(Stainless).
Remove the wire connections.

Be sure the wiring should not be
changed in reassembling

Remove the Latch assembly.
Remove 8 screws for Controller.

Controller

Latch Assembly

Controller

- 18 -