PowerView®
Model PV1100
Installation Manual
00-02-1020
2018-07-16
Section 78
In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our
specifications and designs at any time. The latest version of this manual can be found at enovationcontrols.com.
Please read the following information before installing.
BEFORE BEGINNING INSTALLATION OF THIS MURPHY
PRODUCT:
Read and follow all installation instructions.
Please contact Enovation Controls immediately if you have any
questions.
Table of Contents
Hardware Installation ................................................................................................................. 1
Inspecting Package Contents .......................................................................................1
Dash-Mounted Installation............................................................................................1
Mounting Bracket .........................................................................................................3
Wiring Information ..................................................................................................................... 5
Pin Out Specifications ..................................................................................................5
Configuration Information ........................................................................................................ 8
Wiring Schematics – Black Connector (Valid for all non-connected wiring) .................9
Wiring Schematics – Gray Connector (Valid for all non-connected wiring) ................ 10
Specifications ........................................................................................................................... 11
Dimensions ............................................................................................................................... 13
THIS PAGE INTENTIONALLY LEFT BLANK
Hardware Installation
The following instructions will guide you through installing the PowerView display.
Inspecting Package Contents
Before attempting to install the product, it is recommended that you ensure all parts are
accounted for and inspect each item for damage (which sometimes occurs during shipping).
The items included in the box are:
• PV1100 unit
• Installation manual web reference insert
Dash-Mounted Installation
Installation kit (sold separately) – P/N 78-00-1277 includes:
• Bracket
• Panel Seal
• (4) 8-32 machine screws
Section 78 00-02-1020
2018-07-16 - 1 -
Tools needed.
• Drill with 7/32 in. size bit
• Jigsaw
Preparing the Dash
Determine the location of the PV1100 in the dash. Cut a hole in the dash to these dimensions:
(For actual cutout template, see support.enovationcontrols.com, then search for PV1100)
• (recessed mounting): 10.45” x 6.79” (265.61mm x 172.61mm)
• (surface mounting): 7.28” x 2.56” (185mm x 65mm)
Section 78 00-02-1020
2018-07-16 - 2 -
Mounting the Unit
1. Place the back side of the display through the opening in the dash.
2. Use the four included screws from the mounting kit (78-00-1277) to attach the unit to the
bracket and torque to 10 inch-pounds.
Mounting Bracket
Section 78 00-02-1020
2018-07-16 - 3 -
Part Number
Description
Order Details
How to Order
The following PV1100 displays and accessories are available through Enovation Controls:
78700636 PV1100, Touch, Non-connected, Landscape Display
78700654 PV1100, Touch, Non-connected, Portrait Display
78090098 Programming Kit, PV780/PV1100
78001277 Kit, Mounting Bracket, PV1100
78001055 Harness, Gray Connector, USB
78001056 Harness, Gray Connector, Flying Leads
78001057 Harness, Black Connector, Flying Leads
78001017 Harness, Black Connector, Development
78001018 Harness, Gray Connector, Development
78090069 Harness, PV750/PV1100 Conversion, Power/CAN
Accessories
Section 78 00-02-1020
2018-07-16 - 4 -
Wiring Information
Pin Out Specifications
Black Connector
1
2
3
4
5
6
7
8
9
10
11
12
13
Digital Input 1
Analog Input 3
Analog Input 2
Analog Input 1
CAN1 Low
CAN1 High
Battery
Ground
Analog Input 3 Ground
Analog Input 2 Ground
Analog Input 1 Ground
Digital Input 3
Digital Input 2
14
15
16
17
18
19
20
21
22
23
Frequency Output 1
Ignition Input
No Connect
No Connect
CAN2 Low
CAN2 High
Digital Input 4
Digital Input 5
Digital Output
Frequency Output 2
Section 78 00-02-1020
2018-07-16 - 5 -
Gray Connector
1
2
3
4
5
6
7
8
9
10
11
12
Video Input 1 NTSC/PAL
Video Input 2 NTSC/PAL
Video Input 3 NTSC/PAL
RS-485 High
RS-485 Low
LINE_OUT_1_R Negative Audio Out Right
LINE_OUT_1_R Positive Audio Out - Right
LINE_OUT_1_L Negative Audio Out - Left
Video Input 1 Ground
Video Input 2 Ground
Video Input 3 Ground
No Connect
13
14
15
16
17
18
19
20
21
22
23
Frequency Input
Frequency Return
No Connect AUDIO OUT - LEFT
USB D- White (Data -)
USB D+ Green (Data +)
USB 5V Red (+5V)
USB Ground Black
USB Shield
No Connect
No Connect
No Connect
Section 78 00-02-1020
2018-07-16 - 6 -
35 Pin Black Connector
1, 2, 3, 4
5
6
7
8
9
10
11
12
13, 14, 15
16
17
18
No Connect
LINE_IN_1_L Audio In
LINE_IN_1_L Return Audio In
LINE_IN_1_R Audio In
LINE_IN_1_R Return Audio IN
LINE_IN_2_L Audio In
LINE_IN_2_L Return Audio In
LINE_IN_2_R Audio In
LINE_IN_2_R Return Audio In
No Connect
LINE_OUT_1_L Negative Audio Out - Left
LINE_OUT_1_L Positive Audio Out - Left
LINE_OUT_4_L Negative Audio Out - Left
19
20
21
22
23
24
25
26
27
28
LINE_OUT_4_L Positive Audio Out - Left
LINE_OUT_3_L Negative Audio Out - Left
LINE_OUT_3_L Positive Audio Out - Left
LINE_OUT_2_L Negative Audio Out - Left
LINE_OUT_2_L Positive Audio Out - Left
AMP_TURN_ON 3 Accessory Output 2
AMP_TURN_ON 2 Accessory Output 1
AMP_TURN_ON 1 Amp Control
No Connect
LINE_OUT_1_R Negative Audio Out –
Right
29
30
31
32
33
34
35
LINE_OUT_1_R Positive Audio Out - Right
LINE_OUT_4_R Negative Audio Out - Right
LINE_OUT_4_R Positive Audio Out - Right
LINE_OUT_3_R Negative Audio Out - Right
LINE_OUT_3_R Positive Audio Out - Right
LINE_OUT_2_R Negative Audio Out - Right
LINE_OUT_2_R Positive Audio Out - Right
NOTE: The 35-pin connector pins are only active for the connected stereo
option.
Section 78 00-02-1020
2018-07-16 - 7 -
M-12, 5-pos, A-coded
Ethernet (M12) Connector
1
2
3
4
5
Ethernet TX+
Ethernet RX+
Ethernet TX-
Ethernet RX-
Ethernet Ground
Plastic Knurl Connector Only
NOTE: Ethernet connectivity is optional. Available on connected and connected
stereo options.
Configuration Information
Follow these steps to download a custom configuration to the PV1100 display:
Step Action
1 Turn off the display.
2 Insert the USB drive that contains the new configuration file into the
display’s attached USB pigtail.
3 Place a magnet onto the spot shown here on the upper middle back of the
display:
4 Power the display back on, continually holding the magnet in place.
5 Remove the magnet when the display shows the utility for loading new software.
6 Touch the arrow keys on the screen to select the configuration file from the USB to
be loaded into the display. Start the configuration load by pressing the right
arrow/green key on the screen twice. When complete, the unit will reboot into the
loaded application.
Section 78 00-02-1020
2018-07-16 - 8 -
Wiring Schematics – Black Connector (Valid for all non-connected wiring)
WARNING: Failure to install the unit per the specified wiring diagrams may cause
damage to the unit. DO NOT connect power to the video ground. Warranty is void for
damage caused by incorrect wiring.
Section 78 00-02-1020
2018-07-16 - 9 -
Wiring Schematics – Gray Connector (Valid for all non-connected wiring)
WARNING: Failure to install the unit per the specified wiring diagrams may cause
damage to the unit. DO NOT connect power to the video ground. Warranty is void
for damage caused by incorrect wiring.
Section 78 00-02-1020
2018-07-16 - 10 -
(1) M12, 5-pin (Ethernet)
Specifications
Computing
Main Processor:
Operating Sys:
Storage:
Ram:
Graphics:
Displays
Type:
Resolution:
Contrast Ratio:
Brightness:
Surface:
Touch Panel:
Renesas R-Car M2, 32-Bit Arm Cortex A15 Processor @ 1.5 GHz
®
QNX
Real-time Operating System
8GB Flash memory for Operating System, Application and Configuration
512 Mb DDR3-SDRAM
Renesas graphics processor (2D)
10.6” [231.36 mm (H) X 138.82 mm (W)] viewable area, LVDS TFTS LCD with LED
backlight, 24-Bit color
1280 x 768 pixels
1000:1 (typical)
1000 cd/m
Anti-glare, hard coating
Projected capacitive (PCAP) with Glove touch
2
Hardware
Real-time Clock:
Connectors:
Video Inputs:
Communication
CAN:
Serial:
USB:
Ethernet:
Wi-Fi:
Bluetooth:
Included
(2) Ampseal 23 pin (Main)
(1) Ampseal 35 pin
(3) NTSC/PAL
(2) CAN 2.0B according to ISO-11898-2, J1939 and proprietary messaging
(1) RS-485 serial (Modbus: Master/Slave)
(1) USB 2.0 Full Speed Host
(1) Ethernet 10/100 Base-T (Connected Variants Only)
802.11 b/g radio (Connected Variants Only)
Fully Integrated Bluetooth 2.1, Class 1 (Connected Variants Only)
Section 78 00-02-1020
2018-07-16 - 11 -
(1) 500 mA Switched Low-side
(1) Frequency Output (2Hz – 3KHz)
(3) Analog 0-5 VDC, 4-20mA, Resistive, 10-bit resolution
(5) Discrete digital, active high
Electrical
Operating Volts:
Outputs:
Inputs:
Environmental
Operating Temp:
Storage Temp
Protection: IP66 and IP67, front and back, for outdoor use
Vibration:
Shock:
EMC/EMI: SAEJ1113, ISO 13766, CE per 2014/30/EU
6-36 VDC, Reverse polarity protected
-40°C to +70°C (-40°F to +158°F)
-40°C to +85°C (-40°F to +185°F)
3.9 Grms (10 – 350Hz), 3 axes (ISO 15003)
±50G in 3 axes
Section 78 00-02-1020
2018-07-16 - 12 -
Dimensions
Section 78 00-02-1020
2018-07-16 - 13 -
Measurements shown in inches [mm]
Section 78 00-02-1020
2018-07-16 - 14 -
Loading...