Enovation Controls Murphy-Link Series, Murphy ML100, Murphy ML50, Murphy ML25, Murphy ML300 Installation And Operation Manual
...
Murphy-Link Series Panels
Models ML25, ML50, ML100
ML150, and ML300
Installation and Operations Manual
00-02-0842
2013-12-17
Section 30
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our
specifications and designs at any time. The latest version of this manual can be found at www.fwmurphy.com.
BEFORE BEGINNING INSTALLATION OF THI S MURPHY
PRODUCT:
Read and follow all installation instructions.
Please contact Enovation Controls immediately if you have any
questions.
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
Table of Contents
ML25 Panel .......................................................................................................................................... 1
ML50 Panel .......................................................................................................................................... 3
ML100 Panel ........................................................................................................................................ 5
ML150 Panel ........................................................................................................................................ 7
ML300 Panel ........................................................................................................................................ 9
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
(THIS PAGE INTENTIONALLY LEFT BLANK)
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
ML25 Panel
The MurphyLink® Series ML25 Panel f eat ur e s the Pow er Vi ew™ Model PV25 display. This
J1939-compliant device provides electronic engine parameter data, is simple to install, and
matches the PowerView line of rugged displays. The PV25 can be powered by 12 or 24 volt
systems.
The PV25 is equipped with two push buttons to quickly access a convenient menu. In addition,
a back-lit graphic display and two LED’s indicate Active-fault Alarm or Shutdown status.
Active and Stored Fault messages display the SPN (Suspect Parameter Number), FMI (Failure
Mode Indicator) and the OC (Occurrence Count) using the SAE J1939 protocol.
Please refer to the documents included within the panel shipment for the correct panel layout
and schematic.
Section 30 00-02-0842
2013-12-17 - 1 -
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
Loading...