enLighten HB80-5000, HB120-5000, HB240-5000, HB200-5000, HB160-5000 Installation Instructions Manual

Tauro Eco

TM

LED HIGH BAY/ LOW BAY LED LIGHTS

INSTALLATION INSTRUCTIONS

EASY INSTALLATION

Comes with 3m Australian Flex and Plug and eye bolts as standard.
A mouting bracket is available as an optional extra.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

1.

2.

To avoid the possibility of electrical shock, turn off power supply before
installaon or servicing. Installaon and servicing should be performed
by a qualified electrician and in accordance the latest wiring regulations.

Light must be operated within its specified operating parameters and in
accordance with our warranty requirements.
These documents are available on our website.

TO INSTALL:

Model No.

HB80-5000-xx

HB120-5000-xx

HB160-5000-xx

HB200-5000-xx

HB240-5000-xx

80W

120W

160W

200W

240W

Power

366 x340 x156 mm

439 x340 x156 mm

512 x340 x156 mm

585 x340 x156 mm

658 x340 x156 mm

Dimension

4.3 kg

5.2 kg

6.0 kg

7.0 kg

7.8 kg

Weight

100-240V/277V AC, 50/60Hz, Suitable for Wet Locaons (IP65), Class I

*

This product must be earthed

xx denotes 60° / 90° / 110° degree beam angle

Optional Mounting
Bracket shown

STEP 3:

Connect the power plug to a mains power
socket.

SUSPENSION MOUNTING

STEP 1:

Attach your preferred hanging chain (not
supplied) to the four eye bolts on fitting.

STEP 2:

Secure hanging chain to ceiling.

Use one of the mouting methods described below

STEP 3:

Loosen the mounƟng bracket screws, adjust
the fixture to desired posiƟon, re-secure the
screws.

STEP 4:

Connect the power plug to a mains power
socket.

PENDANT MOUNTING

STEP 1:

Assemble the mounƟng bracket to the fixture
by provided M10 (3/8”) round head screws.

STEP 2:

AƩach Lock-Nut(A) to the boƩom of the
Pendant Stem. AƩach Lock-Nut(B) by holding
the interjacent Fixture Bracket and Ɵghtening
Lock-Nut(B) unƟl secure. See Figure 1.

1 2

Look-Nut(A)*²

Look-Nut(B)*²

Pendant Stem*¹

Pendant Stem Thread

*

¹ Pendant Stem can not be soŌ material (not-provided)

*² Look Nuts are not provided

Power Cord
(Cord Not shown)

Power Cord
(Cord Not shown)

Tighten bracket screws on both sides, luminaire
installaon angle will be fixed by the lock gear.

SURFACE MOUNTING

1

*¹ Minimum M10 (3/8”) Bolts (not-provided)
*² Mounng Nuts are not provided
*³ Allen Wrench: 8mm (5/16”)

2

STEP 1:

Assemble the mounng bracket to the fixture
by provided M10 (3/8”) round head screws.

328 mm (12.91 inches)

40 mm (1.57 inches)

Φ12 mm (0.47 inches)

138 mm (5.43 inches)

12 mm (0.47 inches)

Mounng Bracket

81 mm

(3.19 inches)

75 mm

(2.95 inches)

Luminaire

Mounng Holes For
Minimum M10 (3/8”)
Mounng Bolts

Pendant
Mounng
Hole

Waterproof Connector

1

Celling /Wall

Mounng Bolts*¹

Mounng Nuts*²

Power Cord
(Cord Not shown)

Power Cord
(Cord Not shown)

Allen Wrench*³

STEP 2:

Mount the fixture by TWO(2) minimum M10
(3/8”) bolts. See Figure 1.

STEP 3:

Loosen the mounng bracket screws, adjust
the fixture to desired posion, re-secure the
screws.

STEP 4:

Connect the power plug to a mains power
socket.