ENHANCED VISION 13.3” Portable Monitor User Manual

User Manual

13.3”

Congratulations on your purchase of 13.3” Portable Monitor from
Enhanced Vision. Like all Enhanced Vision products, the
Portable Monitor is designed to give you the highest quality and
convenience available.

The Portable Monitor enables people with low vision to have a high­quality portable viewing solution

.

With its 13.3” screen and integrated

battery, you can see vivid images anywhere you go.

Prior to using this system, please carefully read and

follow the
instructions provided within this booklet. A thorough understanding of the
functionality will allow you to fully benefit from the flexibility and great
features of this device.

The Portable Monitor is compatible with many other Enhanced
Vision Products such as Acrobat HD/VGA/TV Short Arm/Long
Arm, Transformer VGA, and Max.

FCC COMPLIANCE NOTICE

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, in cluding interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the in structions, may cause harmful
interference to radio communications.

However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Unauthorized changes or mod

ifi

cation to this system can void the user’s

authority to operate this equipment.

If your Low Vision device has an option to connect to a TV, it must be
used with shielded interface cables in order to meet FCC emissio ns
limits for Class B digital devices. It is the responsibility of the user to use
the shielded interface cables supplied with the equipment.

Important Safety Precautions

........................................................................

5-6

Portable Monitor

Portable Monitor Package Contents

..............................................................

7

Connections & Controls

.......................................................................................

8

Using the Portable Monitor

..........................................................................

9 -11

Connecting to Other Enhanced Vision Products

Connecting to Acrobat HD Short Arm / Long Arm

..................................

12

Connecting to Transformer

.............................................................................. 13

Connecting to Max

...............................................................................................14

Troubleshooting

………………………………………………………………………… 15

Specifications

...........................................................................................................

16

Warranty Statement

..............................................................................................17

Other Enhanced Vision Products

..........................................................

18-20

Contact Information

..............................................................................................

20

TABLE OF CONTENTS

For your safety and to obtain the most benefit from the Portable
Monitor, please read these safety precautions very carefully.

The Portable Monitor is not designed to restore vision, correct eye
conditions or halt degenerative vision loss. An eye care professional can
determine the usefulness and suitability of the Portable Monitor for a
patient’s individual condition. Please follow these safety precautions:

• Use the Portable Monitor on a stable, level surface such as a solid
desk or table, and position the stand to your desired viewing angle
according to its intended design specifications.

• Avoid placing the Portable Monitor on an unstable table, cart or stand. It
may fall causing serious damage to the unit or bodily injury to the user.

• Use the Portable Monitor indoors only – it should NOT be exposed to
extreme or rapid changes in temperature or humidity. Do not place the
Portable Monitor near a radiator, heater or areas exposed to long hours
of direct sunlight.

• Always place the power cord away from traffic areas to avoid damage
of power supply.

• Prevent the risk of electrical shock by NOT attempting to
disassemble the unit. Please refer all service to an authorized repair
facility.

• Follow all warnings, cautions, and instructions marked on the product.

• The attached power cord is a disconnect device for electrical

equipment. The socket-outlet should be installed near the
equipment and be easily accessible.

• Do not use the Portable Monitor in, near or around water. The
Portable Monitor is not designed to offer protection against contact
with liquids of any kind.

• When unpacking and transporting, do not attempt to lift or carry the
LCD using the kick-stand.

IMPORTANT SAFETY PRECAUTIONS

5

• This product is equipped with a 3-wire grounding type plug as a
safety feature. This plug has a third (grounding) pin and can only
be plugged into a grounding-type power outlet. If necessary,
contact an electrician to replace your power outlet with a
grounding-type power outlet.

• Do not use the Portable Monitor near flammable liquids.

• At least once per week, clean the Portable Monitor with a soft dry

cloth or an electrostatic dusting cloth. No additional methods of
sterilization or cleaning are recommended nor required.

Susceptibility to Interference

There may be temporary degradation of the image when the Portable
Monitor is subjected to a strong radio frequency field, electro-static
discharge or transient electrical noise. An electro-static discharge
(caused by static electricity) may cause the screen to go blank. If this
happens, disconnect the AC power from the electrical outlet, wait 30
seconds, and connect the AC power again.

Compliance Warnings

•

Electromagnetic compatibility: The use of accessories and cables other
than those specified by Enhanced Vision may result in increased
emissions or decreased immunity of the Portable Monitor.

•

Placement of equipment: The Portable Monitor should not be used adjacent
to or stacked with other equipment.

6

PORTABLE MONITOR PACKAGE CONTENTS

1 3 2

The Portable Monitor is comprised of the following items:

1. Portable Monitor: 13.3” TFT Monitor

2. Bonnet: used to protect 13.3” Portable Monitor

3. 12V DC Power Cord: connects power from the Portable Monitor to
the camera system control box (not used with Transformer)

4. Power Supply: converts the AC power signal to 19V DC

5. Power Cord: connects from the Wall Outlet to Power Supply

(Style varies by country)

6. Carrying Case: Style varies by product ordered

7. Lens Cloth: permits cleaning of the LCD monitor and lenses

4 5 7

6

7

CONNECTIONS & CONTROLS

1 2 3 4 5 6 7

1. Battery On/Off – Turn Off if the Portable Monitor will not be in use for an

extended period of time and when transporting

2. 19V Input power

3. Composite Video input (CVBS)

4. VGA Input

5. HDMI Input (with audio)

6. USB connector for output power 5V@2A (Not currently used)

7. 12V@0.8A Output

Volume +/-

Power Button

Yellow = Standby or no

camera signal

Blue = On (signal present)

Speaker

Speaker

Brightness +/-

Video Source

Menu /

Battery

Status

8

The Portable Monitor can be used with the power supply connected

- or - using its own internal battery. The system is shipped from the

factory with the battery disabled. Prior to first use the ‘Battery

Off/On’ Switch needs to be placed into the ‘ON’ position (See

Figure 1). The switch is located on the back of the portable
monitor. We strongly recommend that this switch be placed into
the ‘OFF’ position when you transport the unit.

The internal battery of the Portable Monitor is partially charged when
the unit is shipped from the factory. We recommend that you fully
charge the internal battery prior to the first use. Please follow the
instructions below.

Connecting the Power Supply & Charging the Battery

Connect the Power Supply & Power Supply Cord together (See Figure 2).
Connect the Power Cord to an outlet and the other end of the Power

Supply to the back of the Portable Monitor where it says “DC 19V In” (See

Figures 3 & 4).
Once the Power Supply is connected to both the wall and the system, the

Portable Monitor will start charging automatically. You can use the
Portable Monitor while charging is in process. The battery will charge
while in use as long as the system is plugged into an outlet. You cannot
overcharge the battery. However, the more charge cycles, the shorter the
battery life. Approximate charge time is 4+ hours (powered off), 5.5+ hours
(while in-use).

Figure 1

Figure 2

Figure 3

Figure 4

USING THE PORTABLE MONITOR

9

Turning the Portable Monitor On/Off

To turn the Portable Monitor on, press the Power Button on the
front of the Portable Monitor – the power symbol on the power button

will illuminate ‘Blue’. If no video signal is present, the power button

will illuminate ‘Yellow’ (Standby Mode). To turn the Portable Monitor

off, simply press and release the Power Button - the power button
illumination will turn off.

The battery will drain over time if you leave the Portable Monitor in
‘Standby Mode’. We recommend shutting off the Portable Monitor
if you are not using it for an extended period of time to conserve
battery life.

Charging Condition Icon

When the Portable Monitor is connected to wall power and turned on
with a video signal present - The ‘Charging Condition Icon’ appears in
the lower right corner of the LCD. If the ‘charging condition icon’ is

GREEN then the battery is fully charged. If the ‘charging condition
icon’ is YELLOW then the battery is being charged.

Power Button

10

Charger condition Icon:
Yellow: Unit is charging
Green: Unit is fully charged

This is active only when AC adapter is plugged
in and a video signal is present

Checking the Battery Level**

To check the battery level, press the MENU button on the right side
of the Portable Monitor (See below).

** The Portable Monitor must be powered on, and a video signal must be present, to
check the battery level

When the battery has less than 1 hour of charge left the ‘Critical’
Battery Icon (See below) will appear, and flash 3 times, every 10
minutes until the Panel shuts down. It is STRONGLY
recommended that you connect the Power Supply provided with the
Portable Monitor to recharge the battery as soon as possible when
this begins to occur.

Flashing

11

Connecting Acrobat – Short Arm / Long Arm

The Acrobat uses a specially-designed, integrated “Y” cable for making both HDMI**/VGA
and power connections. One end of the “Y” cable is already connected to the Power/Control

Box. The other end of the “Y” cable connects to Portable Monitor.
** Acrobat products with a DVI connection on the Output Cable will require a ‘DVI to HDMI Adapter’

Use the following procedure to make the appropriate connections:
(See Figure 1)

1) Connect the end of the output cable to the corresponding input on the rear of the
Portable Monitor. Picture below shows HDMI.

2) Connect the straight tip of the Power Cord to the power input on the
Power/Control Box.

3) Connect the remaining end of the Power cord (white right-angle) to the DC 12V Output
on the back of the Portable Monitor.

4) Use the rocker switch on the side of the Control Box to power
ON/OFF the Acrobat w/Portable Monitor. We recommend leaving it in the on position

and turning the entire system off with the Power button on the monitor.

Output Cable

Video Inputs on

Rear of Portable

Monitor

#1

To DC 12V Out on

Rear of Portable

Monitor – Red End

#3

#4

HDMI

VGA

CONNECTING TO OTHER ENHANCED VISION PRODUCTS

The following three pages provide details on how to connect other Enhanced
Vision Products to the Portable Monitor. Please refer to your Enhanced Vision
product User Manual for detailed information on the use of that specific
product.

12

Connecting Transformer VGA

The Transformer VGA

comes with a specially-desig

ned

VGA cable which is
used to connect the Transformer VGA dongle to the back of the Portable
Monitor

(See Figure 1). Please note that if you purchased the Transformer

VGA and the Portable Monitor together this cable is already connected to
the back of the monitor.

Use the following procedure to connect the Portable Monitor to
Transformer VGA:

1)

Prior to connecting the Transformer VGA to the Portable
Monitor make sure the Transformer battery is fully charged.
You may want to purchase extra batteries and an external
charger since the monitor battery can last 2 – 3 times
longer.

2)

Connect the small end of the VGA cable to the VGA Input
on the dongle (See Figure 2).

3)

Connect the large end of the VGA cable to the VGA In input
on the rear of the Portable Monitor (See Figure 3).

4)

Press the power button on both the Transformer VGA and
Portable Monitor. Make sure the video source on the monitor is

set to VGA input. You may need to press the ‘Video Source’

button on the right side of the monitor a few times to toggle to
VGA input. (See Figure 4).

5)

You will need to power off both the Transformer VGA and
Portable Monitor when you are done using the systems.

Figure 4

Figure 3

Figure 1

Figure 2

13

Connecting Max / Flipper / Acrobat TV

If you have purchased the Portable Monitor to use with one of the
Enhanced Vision devices listed above, please follow the connections
below:

1)

Connect one end of the RCA cable to the VIDEO input on
the Power/Control Box (See Figure 1 - A). Connect the
other end of the RCA cable to the VIDEO IN input on the
back of the Portable Monitor (See Figure 2 - A)

2)

Connect the white right-angle end of the 12V Power Cord
to the POWER Input on the Power/Control Box (See
Figure 1 - B). Connect the red straight end of the Power
Cord to the DC 12V OUT on the back of the Portable
Monitor (See Figure 2 - B).

3)

Use the ON/OFF rocker switch on the side of the Control Box
to power ON your Enhanced Vision product. We recommend

leaving it in the ON position and turning the entire system
On/Off with the Power button on the monitor once you have
done so.

4)

Make sure the video source on the monitor is set to CVBS

input. You may need to press the ‘Video Source’ button on

the right side of the monitor a few times to toggle to CVBS
input. (See figure 3).

A B A

B

Figure 1

Figure 2

Figure 3

14

TROUBLESHOOTING

15

1. No power to the Portable Monitor

 Press the Power button on the front of the Portable Monitor. A

blue, or yellow light should turn on indicating that the power is on

 Make sure the power supply cord is completely plugged into the AC

outlet.

 Make sure that the two parts of the power supply cord are securely

connected (see page 9, Figure 2).

 Make sure that the power supply cord is completely plugged into

the DC 19V In jack on the back of the monitor.

 Check the power strip/surge protectors on/off switch and circuit

breaker if the Portable Monitor is plugged into one.

 Check to make sure the ON/OFF switch on the back monitor is in

the ON position. (see page 11, Figure 1)

2. The light on the Portable Monitor Power Button is Yellow

 This can be caused when there is no video signal going to the

monitor. Cycle through the Video modes using the Video Source
button on the side of the monitor

 Make sure that the On/Off rocker switch on the side of the Control

Box is in the On position (if applicable)

3. Why is there a USB power port on the back of the Portable Monitor?



The USB power port is not currently used for any Enhanced Vision

products. It can be used to charge a cell phone or any other device, if
necessary, that takes 5 volts.

Features:

• Lightweight, portable design

• Built in 2x 1.5W Speakers

• Front Bezel power on/off button with integrated LED’s

• Integrated battery charger

• Ergonomic ID with foldable kickstand

• Multiple video inputs: VGA, CVBS, and HDMI with audio

Display:

• Type: 13.3” TFT active-matrix with LED-backlight

• Resolution: 1366 X 768 pixels (16:9)

• Contrast Ratio: 500:1 typ.

• Brightness: 250 cd/m2 typ.

Physical Dimensions:

~ 9.5”L x 13.5”W x 1.75” H (with stand closed)

Weight: ~ 3.5 lbs.
Environment:

• Operating Temperature: 32˚ – 122˚F (0˚ – 50˚C)

• Storage temperature: -4˚ – 140˚F (-20˚ – 60˚C)

Battery:

• Intergrated Li-Ion rechargeable battery

Estimated Charge times:
~up to 6 hours

Estimated Usage Times with fully charged battery:
Up to 6 hours battery life when used with Acrobat
~ 500 + charge life cycles

Wall adapter:

• UL/CE rated

• Input: 100-240VAC 47/63Hz

• Output: 19VDC, 3.16A max load

Output from panel:

12 VDC

*To prevent condensation, do not use the unit for 1 hour after transporting the unit from extreme cold to room

temperature.
**All times listed are approximate. Actual Charging and Usage times may vary

In the interest of continuous product improvement, specifications and/or minimum system requirements are
subject to change without prior notice.

Features:

• Lightweight, portable design

• Built in 2x 1.5W Speakers

• Front Bezel power on/off button with integrated LED’s

• Integrated battery charger

• Ergonomic ID with foldable kickstand

• Multiple video inputs: VGA, CVBS, and HDMI with audio

Display:

• Type: 13.3” TFT active-matrix with LED-backlight

• Resolution: 1366 X 768 pixels (16:9)

• Contrast Ratio: 500:1 typ.

• Brightness: 250 cd/m2 typ.

Physical Dimensions:

~ 9.5”L x 13.5”W x 1.75” H (with stand closed)

Weight: ~ 3.5 lbs.
Environment:

• Operating Temperature: 32˚ – 122˚F (0˚ – 50˚C)

• Storage temperature: -4˚ – 140˚F (-20˚ – 60˚C)

Battery:

• Integrated Li-Ion rechargeable battery

Estimated Charge times:
~up to 6 hours

Estimated Usage Times with fully charged battery:
Up to 6 hours battery life when used with Acrobat
~ 500 + charge life cycles

Wall adapter:

• UL/CE rated

• Input: 100-240VAC 47/63Hz

• Output: 19VDC, 3.16A max load

Output from panel:

12 VDC

*To prevent condensation, do not use the unit for 1 hour after transporting the unit from extreme cold to room

temperature.
**All times listed are approximate. Actual Charging and Usage times may vary

In the interest of continuous product improvement, specifications and/or minimum system requirements are
subject to change without prior notice.

PORTABLE MONITOR SPECIFICATIONS

16

Enhanced Vision products are designed to give you the highest quality
image, convenient features, ease of use and reliable service. The Portable
Monitor has been inspected and tested prior to shipping. Enhanced
Vision warrants the Portable Monitor against defects in material and
workmanship under normal use for two (2) years from the date of original
purchase. Enhanced Vision, at its option, will at no charge either repair the
product or replace it during the warranty period. There are no other
expressed or implied warranties accompanying this product.

This warranty does not cover: a) Defects or damage from misuse, use in
other than normal and customary manner, accident or neglect; b) Defects or
damage from improper operation, maintenance, installation, adjustment,
altera

tions or modification; c)

Defects or damage from spills of food or liquid;
d) All plastic surfaces and all other externally exposed parts that are
scratched or damaged due to normal use; e) Damage due to operation of the
Portable Monitor with equipment not supplied by Enhanced Vision.

•

You must provide proof of purchase, bearing the date of purchase, in

order to receive warranty service.

•

Anyone using this product does so knowingly assuming certain risks,

due to the need to utilize vision enhancement devices.

Service Process
In the event that technical support or repair service is needed, please contact

your local Enhanced Vision representative or the Enhanced Vision warranty
service center. If warranty service is required, please contact Enhanced
Vision at [phone] Monday through Friday, between 8 a.m. and 5 p.m.
Pacific Standard Time (PST) to re- quest a return authorization number.
Warranty repairs will not be accepted without a valid return authorization
number.

You may wish to keep the original product packaging in case warranty service
is required. The manufacturer cannot provide packaging for warranty repairs.
Note: Please completely fill out and send in the enclosed warranty registration
card.

Enhanced Vision

Portable Monitor Warranty Policy

WARRANTY STATEMENT

17

OTHER ENHANCED VISION PRODUCTS

DaVinci

DaVinci is a high performance desktop video
magnifier (CCTV), featuring HD, text-to-speech (OCR)
and a 3-in-1 camera. With HD you will
experience high definition color and contrast giving you
a beautiful, crystal clear picture and vibrant
colors. Experience the joy of reading with our new text­to-speech feature. DaVinci will read any printed text
aloud with the push of a button.

Magnification: 24” LCD: 2x (minimum)

- to 80x (maximum)

Pebble-mini

Pebble-mini’s ultra-compact design makes it the ideal
hand-held magnifier whether you’re home or on the
go. Easily read prescriptions, mail, labels, price tags,
menus and so much more. 3.0”LCD screen. Freeze
frame and image capture.

28 available viewing modes.
Magnification 2X to 10X

Amigo

Amigo is a truly portable desktop magnifier. Optimal
viewing is achieved with a tilting 6.5 inch viewing
screen. Amigo provides 3.5 to 14x digital magnification
and the lightest weight in its class. Amigo is battery
operated and can be taken anywhere.

18

Transformer

Transformer is the most flexible and portable solution
for reading, writing and viewing magnified images at
any distance. Compatible with popular magnification
software and the latest Windows operating systems.
Transformer’s unique design is perfect for work, home
or school. Weighs less than 3 pounds. Battery
operated up to 4 hours. 28 custom color select
modes.

Magnification 2.4X to 30X
(based on 17”screen)

Merlin elite
See and hear the difference!

Merlin elite is a high performance desktop video
magnifier (CCTV), featuring HD and text-to-speech
(OCR). High definition color and contrast provides a
beautiful, crystal clear picture and vibrant colors. Merlin
elite’s unique design allows for a wide field of view,
displaying more text on the screen.

Magnification: 2.4x - 70x

Merlin HD

Merlin HD’s camera technology produces an even
truer, more natural image. Easily read books and
magazines, read and write letters, manage your
financial records, view color photos, do crossword
puzzles, and even pursue a favorite hobby.
Magnification: 22” LCD: 3.2x (minimum)

to 64.7x (maximum) 24” LCD: 3.4x (minimum)
to 57.8x (maximum)

19

Pebble HD

Pebble HD boasts a new HD camera providing a
crisp, clear, colorful, high definition picture. A new
ergonomic lightweight compact design makes it the
perfect companion whether at home or on the go.
Carry Pebble HD in your purse, pocket, or clip it on
your belt with the included carrying case.

HD camera with 4.3” LCD

Magnification: 1.25x to 13.5x
Multi-purpose handle allows usage in various
positions
Rechargeable battery with up to 3 hours of use

20

Contact Information:

(US Office) Phone: [phone] Fax: [phone]
(UK Office) Phone: [phone] Fax: [phone]
(DE Office) Phone: [phone] Fax: [phone]

www.enhancedvision.com

Technical Support:

Main Toll Free [phone] ext. 3
Local Phone: [phone] ext. 3
E-mail: [e-mail]

MAN-0810-00

Rev1- Oct-2013

Copyright © 2013 by Enhanced Vision. All rights reserved.

www.enhancedvision.com

[phone] (US Office, toll free)

[phone] (US Office)

[phone] (UK Office)

Tel. [phone]

(DE Office)

Fax [phone]

(DE Office)

T

he

Portable Monitor is desig

ned to enhanc

e images t

o improve

the liv

es of people who have low vision. T

he extent t

o which the

Portable Monitor can improve the ability t

o see images and te

xt

depends on a person’

s individual c

ondition

and level of visual

impair

ment. T

he

Portable Monitor is not desig

ned to r

estore vision,

c

orrect ey

e c

onditions or halt degenerativ

e vision

loss

. A

n ey

e car

e

professional can best determine the suitabilit

y of the

Portable

Monitor f

or a pa

tien

t’s specific c

ondition. For more informa

tion,

please visit w

ww

.enhancedvision.c

om.