
Instruction Manual Of IRCRF
1. Installation:
Plug IRCRF into the main power socket, and connect with the elec. appliances.
2. Function:
IRCRF will turn on immediately when it receives the “ON” signal from IRCTX, then the
appliances which connected with IRCRF will work. LED light on IRCRF will be flicker
when IRCRF receives the “OFF” signal from IRCTX, and IRCRF will be turned off,
then the appliances which connected with IRCRF will stop working.
3. Specification:
Voltages: AC125V/60HZ
Current: 15A Max.1875W
Frequency: 315MHZ

REMINDING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.