Englert Color Gard User Manual

ColorGard® is the only snow retention system to be warranted for the life of the roof! It's unsurpassed holding strength and perfect color-match are guaranteed!
®
ColorGard
ColorGard
When snow accumulations begin to melt, the result can be catastrophic as the blanket of snow avalanches o the roof, dumping tons of snow onto anything in its path, damaging landscape, gutters, adjacent roofs, and vehicles, and causing injury or death to passers-by. ColorGard® dramatically reduces the risks associated with rooftop avalanches and maintains the clean colorful appearance of the roof with perfect color and nish matching, which
lasts as long as the roof itself! ColorGard is the only snow retention system designed and engineered on a site-specic basis; guaranteed to perform, to not damage the roof or nish, and to exactly match the roof color—for the entire life of the roof*.
Today’s premium Kynar 500® and Hylar 5000® (PVDF) paint systems used on metal panels are “coil-
coated” and oven-cured. This is the only nish application method that can be warranted against color fade for 30 years or longer. Nothing can equal it! So, why settle for less in a snow guard system? While some dyes, powder-coats and air-dried color application methods may initially simulate a perfect match, the color soon begins to fade and becomes increasingly mismatched with a few years of age. By utilizing a strip of the actual roof material, ColorGard perfectly matches the roof—forever!
ColorGard is mechanically attached with patented S-5!® clamps. S-5! is the trusted name in metal rooftop attachment technology worldwide. S-5! patented, round-point setscrews grip the seam securely without penetration and without damage to the panel’s protective nishes. The clamps are precision-machined from aircraft quality, high tensile aluminum—not cast or plastic. All related hardware is non-ferrous stainless steel for lasting performance.
*See Optional Limited Lifetime Warranty information at the S-5! website (www.S-5.com).
®
The right way to attach almost anything to metal roofs!
888-825-3432 | www.S-5.com
ColorGard® dramatically reduces the risks associated with rooftop avalanches and maintains the clean colorful appearance of the roof with perfect color
and nish matching, which lasts as long as the roof itself! ColorGard is the only snow retention system designed and engineered on a site-specic basis.
Can ColorGard® be Retrotted to an Existing Roof?
Yes, ColorGard® can be easily retrotted to existing roofs, or incorporated into new construction design. Using S-5!® CorruBrackets™ or VersaBrackets™, ColorGard installs perfectly on corrugated and exposed­fastened roofs. ColorGard can be installed any time of year.
Is Design Assistance Available For ColorGard®?
Yes! It is critical to design a solution that takes into account the eects of
gravity on a snow-covered roof. The tested holding strength of ColorGard must be checked and proven against the actual “in-service” gravity loads of the roof. This important step in application engineering should not be omitted for any snow retention product.
Consult with your distributor or use our online calculator at www.S-5.com to help quickly and easily design each job. The calculator will help you to “tailor” the ColorGard system on a project­specic basis, allowing for all the variables involved—and even provide a printout of the calculations and a material requirement list.
S-5! also oers its Certied Calculation Program. To receive the engineer stamp of approval, simply submit your project calculations to our registered engineer for a professional review. Learn more at www.S-5.com/Calculator.
How Easy is it to Install?
Once designed, ColorGard is easy to install, requiring tools that are common to the trade. Because S-5! ColorGard uses mechanical attachment rather than adhesives, installation can be done any time of year, with no cleaning, no priming, no cure times, and no callbacks!
Why is S-5!® the Best Choice?
The premium nishes used on today’s metal roof prod­ucts are uorocarbons— paint resins that are similar in chemical composition to “Teflon,” the popular non-stick coating. The benets of this type of paint are related to its nonstick characteristics. Chemical bonds like tapes, glues and adhesives, therefore, provide only temporary and unreliable solutions. Other mechanical alternatives that involve penetrating the roof or galling the surface result in leakage, corrosion, and voided warranties. Thanks to our patented round-tip setscrews, S-5! clamps do not pierce metal paneling, thereby protecting roof coatings and weather­tightness warranties.
Check out our
ColorGard® Mobile Calculator
What About Cost?
ColorGard is the best buy on the market! This is the best news of all! ColorGard has greater holding strength, better aesthetics, longer service life, and lower installed cost than any other engineered system on the market. Pound-for-pound of holding strength, ColorGard is a better buy than individual cleats or glued units.
1
S-5!® Warning! Please use this product responsibly!
Produc ts are pro tected by m ultiple U. S. and foreign pate nts. Vis it the website at www.S-5.com for complete information on patents and trademarks. For maximum holding strength, setscrews should be tensio ned and re -tensio ned as the se am materi al compresses. Clamp setscr ew tension should be verie d using a calibr ated torque wr ench betwee n 160 and 180 inch poun ds when used on 22 ga steel, and bet ween 130 and 150 inch pou nds for all oth er metals and t hinner gaug es of steel. Co nsult the S-5! website at www.S-5.com for published data regarding holding strength.
Copyrig ht 2011, Metal Roof I nnovations, L td. S-5! produ cts are paten ted protec ted. S-5! aggressively protects its patents, trademarks and copyrights.
2
Distributed by
SLOPE
3
SLOPE
4
Loading...