ENFORCER VC-1BAQ, VC-1BBQ User Manual

SECO-LARM BNC TO VGA CONVERTER

4 SECO-LARM U.S.A., Inc.

WARRANTY

This SECO

-

LARM product is warranted against defects in material and workmanship while used in normal

service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.

NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2011 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.

SECO-LARM U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Website: www.seco-larm.com

Tel: [phone] Fax: [phone]

E-mail: [e-mail]

MiVC-1BxQZZ_1105

.docx

Troubleshooting:

VGA

device does not function correctly

• Make sure the

power, input and output

c

ables

are firmly connected to the converter.

• Make sure the video input device is turned on.

• Make sure the video output device is turned on.

• Test the coaxial cable between the video source
and the converter to make sure it is functional.

• Test the VGA cable between the video monitor

and the converter to make sure it is functional.

• Make sure the monitor being used can support

720 x 480 resolution

Also Available from SECO-LARM:

Passive VGA Balun

Passive Video Balun

Video Distributor

1 Input, 2 outputs

Power

LED indicator not lit

• Make sure power is connected to the

converter

EVT-PB1Q

EVT-SBP-GQ VA-1102B-WQ

PITSW4

Low-cost way to transmit VGA

signals up to 450’ @ 640 x 480

resolution

.

The fast, easy way to connect a

CCTV camera to a monitor,

multiplexer, or vi

d

eo recorder

.

Distributes a single video input to

two video outputs .

BNC to VGA Converter

MANUAL

VC-1BAQ

(Power Adapter Included)

VC-1BBQ

(Power Adapter Not Included)

Note: Products with model n umbers that end with “Q” or th at have

a round green “Q ” sticker are RoHS compliant.

SECO-LARM BNC TO VGA CONVERTER

2 SECO-LARM U.S.A., Inc.

Table of Contents:

Introduction………………………….

2

Specifications………………………. 2
Features…………………………….. 2

Installation…………………………..

2

Introduction:

Features:

Overview…………………………….

3

Sample application………………… 3
OSD Programming / Menu……….. 4

Troubleshooting…………………….

4

The SECO

-

LARM VC-1BAQ

BNC to VGA Converter is the ideal way to transform an analog

video signal into a digital VGA signal. The converter allows any display unit with a VGA input to
display video signals coming from a BNC connector. Traditional CCTV monitors can now be
replaced by any display unit with VGA input. The BNC to VGA Converter is compact and can
be mounted nearly anywhere including on the VESA mount found on most LCD monitors.

•

Converts almost any LCD monitor into a

security monitor.

• Compact size, perfect for plug and play

installation.

• Desktop, wall or VESA mountable.

•

On-screen display (OSD) functions: color,

contrast, tint and brightness.

• Automatically detects NTSC / PAL.

• Video input auto-configure.

• Memory retains settings after power failure.

Specifications:

Input signal

Composite

v

ideo 1Vp

-

p 75ohm BNC jack

Output signal

VGA: 0.7 Vp

-

p RGB, 15 pin female

D-sub

Current consumption

200mA@5VDC

Maximum resolution

NTSC:

720

x480, PAL:

720x576

Power source

500mA

@

5VDC

, 2.5mm jack

Dimensions

53/4"x

211/16"x

11/8" (145x67x27.5 mm)

Weight 7.8-oz (220g)

Installation:

1. Determine the location of where the BNC to VGA

c

onverter will be installed

.

2. Plug the BNC cable into the female-BNC port on the converter.

3. Plug the VGA cable into female-VGA port on the converter.

4. Plug the 5VDC adapter into the converter unit.

5. Turn on the display and the video output device to which the converter is connected.

6. Use the on-screen menu to adjust the brightness, contrast, tint and color until the picture is

displayed correctly. See page 3, On-Screen Display Programming and Menu Controls.

7. If needed, adjust your monitor settings according to the manufacturer’s instructions.

Parts List:

BNC to VGA converter

x 1

Bracket screws x 4

VESA mount screws x 4

Rubber feet

x 4

Mounting bracket x 1

(VESA-compatible)

Manual

x 1

5VDC power adapter x 1

(VC-1BAQ only)

SECO-LARM BNC TO VGA CONVERTER

SECO-LARM U.S.A., Inc 3

Any display with a

VGA input

Sample Application:

On-Screen Display Programming and Menu Controls:

The BNC to VGA Converter has an on

-

screen display

(OSD) to adjust the video signal

being shown. Press any button to enter the OSD.

Using the menu controls

: There are four

functions

to

adjust the

video signal being shown:

Brightness

Determines the relative amount

of light displayed

Contrast

Determines the

relative

difference between light and dark
objects

Color

Determines the relative shade of

the colors displayed

Tint

Determines the relative hue of

the colors displayed on the
screen

Overview:

53/4”

(145mm)

11/8"

(2

7.5

mm)

211/16"

(67mm)

BNC

connector

Power

LED

indicator

VGA connector

Power input

2.5mm jack

Wall / VESA

mount bracket

Bracket

screws

CCTV Camera

5VDC Power

Adapter

VGA Input

BNC Input

Power

DC 5V

VESA mounting

holes

Select a function

from the menu

Down or Up

Adjust the

selected function

Left or Right

Directions above are relative to the drawing shown.