SD-962AR-36G
Grade 1 Rim-Type Exit Device
Manual
Heavy-duty ANSI Grade 1 steel
construction
Allows exit from inside while locked from
outside
Reversible non-handed design
For metal or wood doors up to
13/4" (44mm) thick
Separate deadlocking latch prevents the
use of credit cards or similar means to open
the latch bolt
Fits doors from 33" to 48" (84~122 cm) wide
Hex-type
1
/4-turn dogging lock allows the exit
device to be unlocked for extended period of
time
Includes all needed hardware for typical
installation
Works with standard external door handle/lock
devices (not included)
ENFORCER Grade 1 Rim-Type Exit Device
2 SECO-LARM U.S.A., Inc.
Introduction:
The ENFORCER SD-962AR-36G Rim-Type Exit Device, when mounted on the inside of a door to
block entry to a protected premises, securely locks the door from outside access while allowing
users inside the protected premises to exit.
The stainless steel enclosure protects the exit device from abuse, yet easily unlocks the door from
the inside by users who require exit. It can be connected to an entry-type lever trim or to any
physical locking device on the outside of the door in order to allow entry to authorized personnel.
Dimensions:
Specifications:
Construction
ANSI Grade 1 steel
For doors
13/4" (44mm) thick, wood or metal
Hand
Non-handed
Latch bolt
Stainless steel, 3/4" (19mm) throw
Dead latch
Stainless steel 5/8" (16mm) throw
Strike
For 5/8" (16mm) stop
Spring
Stainless steel
Chassis
Plated steel
Cover
Plated zinc cast
Rail assembly
Aluminum
End cap
Plated zinc cast
Dogging
Hex-type dogging standard
Dimensions
33"x8"x23/16" (838x203x56 mm)
Weight
9-lb 12-oz (4.4kg)
Parts List:
Screws Included:
1x Grade 1 Rim-Type Exit Device
1x Manual
1x Mounting template
1x Strike
1x Hex key
1x End cap
1x End cap bracket
Mounting hardware (see below)
Mounting chassis to door:
4x 1/4"x3/4" machine screws
4x 1/4"x3/4" wood screws
4x sex bolts
Connecting end cap to end cap bracket:
2x M4x6mm machine screws
Mounting end cap bracket to door:
2x 1/4"x3/4" machine screws
2x 1/4"x3/4" wood screws
Mounting strike to door:
2x 1/4"x3/4" machine screws
2x 1/4"x3/4" wood screws
1x #12x3/4" machine screw
8"
(203mm)
213/16" (71mm)
23/16"
(56mm)
23/8"
(61mm)
33" (838mm)
21/4"
(57mm)
Loading...