ENFORCER MVM-AH44-01YQ User Manual

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.
4 HDMI Inputs and 4 HDMI outputs each
of the four HDMI displays connected to the matrix can display any of the four sources connected to the matrix
Supports up to 1080p resolution and 3D Individual status LEDs for each HDMI input
and output
Use with IR over HDMI Adapter
(MVE-PN11-01Q) to control the HDMI matrix or HDMI sources via remote control even if they have been hidden away
RS-232 control
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
MVM-AH44-01YQ
4x4 HDMI Matrix
Manual
ENFORCER 4x4 HDMI Matrix
2 SECO-LARM U.S.A., Inc.
Specifications:
Model
MVM-AH44-01YQ
Type
HDMI Matrix
Input video signal
5.0Vp-p
Video formats supported
High-speed HDMI with 3D, HDCP 1.2
Audio formats supported
LPCM, Dolby-AC3, DTS 7.1, DSD
Output video
HDMI
Resolutions supported
1080p/1080i/720p/576p/576i/480p/480i
Video amplifier bandwidth
6.75Gbps
Video input connector
4x HDMI Type A 19-pin female
Maximum input cable length
24AWG: 50’ (15m); 26AWG: 30’ (10m);
28AWG: 16’ (5m)
Video output connector
4x HDMI Type A 19-pin female
Maximum output cable length
24AWG: 65’ (20m); 26AWG: 50’ (15m);
28AWG: 16’ (5m)
Operating voltage
5VDC
Power supply
3A@5VDC (2.1mm plug)
Current draw
2.1A@5VDC
Operating temperature
32°~158° F (0°~70° C)
Operating humidity
5~90% RH (no condensation)
Dimensions
123/8”x61/8”x1”(315x155x26 mm)
Weight
2-lbs 12.8-oz (1.3kg)
Overview:
Parts List:
1x HDMI Matrix 1x 5VDC Power supply 1x Remote control 1x Manual
On/Off switch
IR Adapter ports
IR Sensor
IR Extender port
Input selection buttons
HDMI
Outputs
HDMI
Inputs
RS-232
Port
5VDC
Status LEDs
RS-232 Port:
RS-232 Port provided for remote control via computer or home automation systems.
Connector
DB-9 Male
Baud rate
9,600bit/s
Data bits
8
Parity
None
Stop bits
1
Flow control
None
5 4 3 2 1
1 2 3 4 5
Only pins 2 (Rx), 3 (Tx), and 5 (GND) are used.
9 8 7 6
9 8 7 6
Loading...
+ 2 hidden pages