MVE-AH1E1-41NQ
4K HDMI Extender over Single Cat5e/6
Manual
Up to 984ft (300m)
4K
Resolution
Up to
196ft
(60m)
Range
Cat5e/6
Single Cable
Plug
and
Play
Operation
Features:
Extend HDMI over a single Cat5e/6 cable
Supports resolutions from 480i to 4K with
zero signal loss
Transmits 4K@30Hz up to 164’ (50m) or
1080p@60Hz up to 196' (60m) over
Cat6 cable
Plug and play operation
Active operation ensures signal strength
Bi-directional IR for two-way remote
control extension
One (1) 12VDC power supply included –
set can be powered at either end
ENFORCER 4K HDMI® Extender over Single Cat5e/6
2 SECO-LARM U.S.A., Inc.
The ENFORCER 4K HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling
methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6. HDMI
formats as large as 4K can be transmitted up to 164ft (50m) between the two units with zero signal loss by
using integrated circuits in the receiver and transmitter.
Signal Strength – Active operation ensures that the signal strength will remain strong over the length of
the cable.
Distance – The 4K HDMI Extender over Single Cat5e/6 is capable of providing a clear HDMI signal up to
164ft (50m) at 4K resolution or 196ft (60m) at 1080p resolution.
Formats Supported – The 4K HDMI Extender over Single Cat5e/6 supports both progressive and
interlaced formats: 4K@30Hz/1080p/1080i/720p/576p/480p/480i.
Plug and Play – The 4K HDMI Extender over Single Cat5e/6 comes as a complete set consisting of a
transmitter and receiver, power supply, and IR dongles.
Zero Signal Loss – Integrated circuits in the transmitter and receiver clean, buffer, and amplify the HDMI
signal to prevent signal loss and ensure a clear signal regardless of the length of the cable.
Bi-directional IR – Send IR signals from the source to the monitor or from the monitor to the source for
discrete operation of devices.
Input video signal
3.3V
Input DDC signal
5Vp-p (TTL)
Maximum single link range
4K@30Hz
Deep color
8bit
Video formats supported
High-speed HDMI, HDCP 2.2
Audio formats supported
LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+,
DolbyTrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Output video
HDMI
Resolutions supported
4K@30Hz/1080p/1080i/720p/576p/576i/480p/480i
Range
4K@30Hz
Cat6: Up to 164' (50m); Cat5e: Up to 82' (25m)
1080p
Cat6: Up to 196' (60m); Cat5e: Up to 98' (30m)
Video amplifier bandwidth
10.2Gbps
Video input connector
HDMI Type A 19-pin female
Video output connector
HDMI Type A 19-pin female
Cat5e/6 wiring standard
T-568B
IR Pass-through frequency
30~60 kHz
Operating voltage
12VDC
Power supply
1A@12VDC (1 Adapter) (2.1mm plug)
ESD Protection (human body model)
±8kV (air-gap discharge), ±4kV (contact discharge)
Current draw
Transmitter
85mA@12VDC
Receiver
125mA@12VDC
Operating temperature
32°~104° F (0°~40° C)
Operating humidity
20~90% RH (no condensation)
Dimensions
37/16"x23/8"x11/16" (88x61x17 mm)
Weight
5.08-oz (144g) (each)
1x Transmitter
2x IR Transmitters (w/ double sided tape)
1x 12VDC power adapter
1x Receiver
2x IR Receivers (w/ double sided tape)
1x Manual
Introduction:
Features:
Parts List:
Specifications:
Loading...