Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.
OSD (On-Screen Display)
for Covert PIR Camera
Manual
For the following cameras:
Model Format
Programmable
Motion-Activated LED
Covert
IR LEDs
EV-6680-N3WQ
NTSC
Yes
No
EV-6680-P3WQ
PAL
Yes
No
EV-6681-N3WQ
NTSC
No
Yes
EV-6681-P3WQ
PAL
No
Yes
EV-6680 Series
Motion-activated LED
programmable from t he
OSD menu, simulatin g a
real PIR s ensor.
EV-6681 Series
Invisible 940nm IR
LEDs provi de infrared
light for the camera but
are invisible to the
human eye.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
2 SECO-LARM U.S.A., Inc.
HLC OFF
D-WDR OFF
2D-NR OFF
HLC ON
D-WDR ON
2D-NR ON
Digital Wide Dynamic Range (D-WDR) ........... 9
Motion Detection ............................................. 9
Day / Night Mode ........................................... 10
2D Noise Reduction (NR) .............................. 11
Camera ID ..................................................... 11
Sync .............................................................. 11
Language ...................................................... 12
Camera Reset ............................................... 12
Troubleshooting ............................................. 12
Table of Contents:
Programmable Features ................................... 2
How to Use the OSD Controller ........................ 3
Main Setup Menu ............................................. 3
Menu Diagram 1 ............................................... 4
Menu Diagram 2 ............................................... 5
Lens .................................................................. 5
Shutter / Automatic Gain Control (AGC) ........... 6
White Balance .................................................. 7
Backlight Compensation (BLC) ........................ 8
Programmable Features:
• Lens
Choose between DC Auto Iris and Manual
Lens Adjustment
• Shutter
Manually adjust the shutter speed
• White Balance
Adjust the color temperature and image
color of the picture
• Backlight Compensation (BLC)
Adjust the exposure to properly display the
subject in front of a bright light source
• Highlight Compensation (HLC )
Define target areas and remove spotlights
to make certain objects visible
• Picture Adjustment
Adjust the camera’s brightness, contrast,
sharpness, hue, and gain
• Digital Wide Dynamic Range (D-WDR)
Adjust the brightness values of the image for
a more detailed picture
• Motion Detection
Detect if there is motion in the scene
• Day/Night Mode
Adjust the level where the camera will
switch from color to B/W when the ambient
light is low
• 2D Noise Reduction (NR)
Adjust for less interference on the screen in
an area with low illumination
• Camera ID
Set a name for the camera to display on
screen
• Language
Set the OSD language
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
SECO-LARM U.S.A., Inc. 3
1. Press down on the joystick to open the OSD menu.
2. Use the joystick to navigate the OSD menu.
3. To select an item, press down on the joystick.
Please read the camera installation manual for safety precautions and detailed instructions on
how to install the camera.
How to Use the OSD Controller:
Main Setup Menu:
Menu items can be selected by using the joystick.
1. Press down on the joystick.
The Main Setup Menu will be displayed on the monitor.
2. Move to and select the required function by moving the joystick up and down.
3. Change the menu setting by moving the joystick left and right.
4. After choosing the setting, move the cursor to EXIT and press down on the joystick.
Menu Diagram 1
Menu Diagram 2
Note:
• Select available options by moving the cursor to the desired feature.
• A submenu is available where the option reads .
• SYNC SETUP cannot be altered. SYNC SETUP is set to internal synchronization mode.
OSD
Controller
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
4 SECO-LARM U.S.A., Inc.
Menu Diagram 1:
SETUP MENU
SETTING
SETTING O PTIONS
1) LENS
(see page 5)
AUTO
TYPE: DC / VID EO
MODE: AUTO / OPEN / CLOSE
SPEED: 0~255 Adjustable rang e
MANUAL
Set for fixed lens camera
2) SHUTTER / AG C
(see page 6)
AUTO
High Luminance: MODE1: SHUT + AUTO IRIS / AUTO IRIS / SHUT
BRIGHTN E SS: 0~255 Adjustable range
Low Luminance: MODE: AGC / OFF
BRIGHTN E SS: x0.25, x0.50, x0.75, x1.0 0
MANUAL
MODE: SHUT + AGC
SHUTTER: 1/60, 1/120, 1/250, 1/500, 1/1 000, 1/2000, 1/4000,
1/10,000
AGC: 6.00, 12.00, 18.00, 24.00, 30. 00, 36.00, 42.00, 44.80
3) WHITE BAL
(see page 7)
ATW
SPEED: 0~255 Adjust abl e ra ng e
DELAY CNT: 0~255 Adjust abl e ra ng e
ATW FRAME: x.050, x1.00, x1.50, x2.00
ENVIRONMENT: INDOOR / OUT DOOR
PUSH
Disable w hite balance mode
USER1
B-Gain: 0~255 Adjus t abl e rang e
R-Gain: 0~255 Adjustable rang e
USER2
B-Gain: 0~255 Adjus t abl e rang e
R-Gain: 0~255 Adjustable rang e
ANTI CR
Enable ant i-color rolling
MANUAL
LEVEL: 26~72 Adjustable rang e
PUSH LOCK
Disable w hite balance mode by pressing ENTER
4) BACKLIGHT
(see page 8)
OFF
Disable b acklight c ompensation
BLC
Enable backlight compensation
HLC
Enable hi ghlight compensation
5) PICT ADJUST
(see page 8)
MIRROR
ON / OFF
BRIGHTNESS
0~255 Adjust abl e ra ng e
CONTRAST
0~255 Adjust abl e ra ng e
SHARPNESS
0~255 Adjust abl e ra ng e
HUE
0~255 Adjust abl e ra ng e
GAIN
0~255 Adjust abl e ra ng e
6) D-WDR
(see page 9)
ON
LUMINANCE: LOW / MID / HIGH
CONTRAST: LOW / MIDLOW / MID / MIDHIGH / HIGH
OFF
Disable digital wid e dynamic range
7) MOTION DET
(see page 9)
ON
DETECT SENSE: 0~127 Adj us table range
BLOCK DISP: ON / OFF / ENABLE
MONITOR AREA: ON / OFF
AREA SEL: Up to 4 selec table zones
TOP: 0~244 Adjust abl e ra ng e
BOTTOM: 0~244 Adjustable ra ng e
LEFT: 0~474 Adjust abl e range
RIGHT: 0~474 Adjust abl e ra ng e
OFF
Disable mot ion det ec t ion
8) NEXT Access Menu Diagram 2 (see pag e 5)
9) EXIT Exit menu and save settings
10) SAVE ALL Save menu settings without exiting the menu
1
In MANUA L LENS mode, only SH UT mode is av ailable. In AUTO LENS mode, SHUT + AUTO IRIS and AUTO IRIS
modes are al so available.
Loading...