1.5mm lens (170° viewing angle)
Sony
1
/4” Color CCD
Fits in a single-gang, slimline, or
European plate
Adjustable mounting angle
600 TV lines
Reversible image
Weatherproof (IP67)
EV-5105-N1SQ (NTSC)
Includes 1 single-gang
and 1 slimline plate
EV-5105-P1SQ (PAL)
EV-5145-N1SQ (NTSC)
Includes 1 European plate
EV-5145-P1SQ (PAL)
Manual
Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS -compliant products.
Discreet Indoor/Outdoor
Wall-Plate Camera
ENFORCER Weatherproof Discreet Wall-Plate Camera
2 SECO-LARM U.S.A., Inc.
EV-5105-N1SQ
EV-5105-P1SQ
EV-5145-N1SQ
EV-5145-P1SQ
Type
Wall Plate Camera
CCD
1
/4” Sony Color CCD
Resolution
600 TV lines
Video output format
NTSC
PAL
NTSC
PAL
Pickup elements
768x494 pixels
752x582 pixels
768x494 pixels
752x582 pixels
Video output
1.0Vp-p composite video, 75Ω
Scanning system
2:1 Interlace
Lens
1.5mm
Viewing angle
170
Minimum illumination
0.5 Lux at F/2.0
S/N ratio
>48dB
Gamma correction
0.45
Gain control
Auto
IP rating
IP67
Power source
12VDC±10%
Current draw
67mA
Operating temperature
14 ~122 F (-10 ~50 C)
Dimensions
Camera
13/16”x13/16”x11/4”(30x30x35 mm)
Single-Gang
23/4”x41/2” (70x114 mm)
N/A
Slimline
11/2”x41/2” (38x114 mm)
N/A
European
N/A
37/16”x37/16” (86x86 mm)
Weight
3.4-oz (96g) (Camera + 1 plate)
Plate Dimensions:
Parts List:
Specifications:
All models include:
1 x Manual
1 x Camera
1 x Angled plastic ring
EV-5105 models only:
1 x Single-gang plate
1 x Slimline plate
EV-5145 models only:
1 x European plate
41/2”
(114mm)
Slimline plate
(EV-5105 models only)
37/16” (86mm)
37/16”
(86mm)
European plate
(EV-5145 models only)
1 x Angled rubber ring
1 x Threaded ring
2 x Stainless-steel screws
23/4” (70mm)
41/2”
(114mm)
Single-gang plate
(EV-5105 models only)
11/2” (38mm)
Camera Dimensions:
9
/16” (14mm)
13/16”
(30mm)
11/4” (35mm)
13
/16”
(21mm)
11/16”
(27mm)
ENFORCER Weatherproof Discreet Wall-Plate Camera
SECO-LARM U.S.A., Inc. 3
1. Please read this manual carefully and keep it for
future reference.
2. Use the camera within given temperature and
electrical limits.
3. Do not mount the camera where it is exposed to
rain or other moisture, or in humid or dusty places.
4. Do not point the camera at the sun. Heat could
damage the camera, even when not in use.
5. Do not mount the camera in areas exposed to radiation,
strong magnetic fields, or strong electrical signals.
6. Do not open or disassemble the camera. There are no
user-serviceable parts inside.
7. Do not drop the camera or subject it to strong vibrations.
Before Starting:
Overview:
BNC connector
Reverse image wire loop*
Plate
Angled rubber ring
12VDC
Note polarity when running power
Angled
plastic ring
Camera
IMPORTANT
Do not cut the video or power wires as warranty will be voided.
*To reverse the camera’s image, cut the reverse image
wire loop. To restore the image to default, reattach the
reverse image wire loop. Make sure bare wires are
protected by electrical tape or a similar coating.
Mounting the Camera to the Plate:
If an object installed next to the camera on the wall is
blocking the field of vision, the angled rings may be
installed in front of the wall plate to move the field of
vision forward.
Threaded ring
Changing the Mounting Angle:
Install the angled plastic ring on the front of the plate so
that the camera is tilted. (Approximately 20 )
With a plate and back box (suggested):
With a plate, but no back box:
With no plate and no back box:
Drill a hole in the
wall big enough to
fit the camera.
Mount the plate
directly to the wall.
(See Dimensions.)
Drill a hole in the wall
big enough to fit the
camera. If mounting
to a thick surface, it
may not be
necessary to use the
angled rings.
(See Dimensions.)
Back box not included.
Mounting Options:
Thin wall
Thick wall
To mount the camera to the plate, position the angled
rings behind the plate, and twist the threaded ring on
to secure the plate to the camera.
Min. wall thickness:
5
/16” (8mm)
Max. wall thickness:
3
/4” (20mm)
ENFORCER Weatherproof Discreet Wall-Plate Camera
4 SECO-LARM U.S.A., Inc.
MiEV-51x5-x1SQ-N6SQ_1105.docx
PIKSR1
IMPORTANT
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws and
statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use of this
product in violation of any current laws or statutes.
WARNING
Stop using the camera if you see a malfunction such as smoke or unusual heat, as it could cause fire or electric shock. Do not open
the case of this device, as there are no user-serviceable components inside.
FCC COMPLIANCE STATEMENT
Information to the user: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his or her own expense.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for
a period of three (3) years from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair
or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or
alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or
property damages of any kind to the purchaser or anyone else.
NOTICE
The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is
one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without
notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2011 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,
without the written permission of SECO-LARM.
SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999
Website: www.seco-larm.com
E-mail: sales@seco-larm.com
The screen is blank.
The screen image is dim
The screen image has poor contrast.
The screen image flickers.
The screen image is distorted.
The camera case is hot.
Check that the camera is powered up.
Check that the power supply’s polarity is correct.
Check that the monitor is powered up.
Check that the video cable connecting the camera to the
monitor is connected properly.
Clean the lens using a soft, clean cloth.
Check that the light source is adequate.
Adjust the monitor’s contrast knob.
Change the position of the camera.
Change the position of the camera.
Change the position of the camera.
Check that the correct power supply is in use.
Troubleshooting:
Loading...