ENFORCER EV-2726-N3GQ, EV-2726-N3WQ, EV-2726-NVGQ, EV-2726-NVWQ, EV-2726-P3GQ On-screen Display Manual
...
3X Series Vandal Rollerball Camera
Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS -compliant products.
On-Screen Display Manual
NTSC Model #
PAL Model #
Lens
Resolution
# of
IR LEDs
Housing
EV-2726-N3GQ
EV-2726-P3GQ
3.6mm
700 TV lines
24
Gray
EV-2726-N3WQ
EV-2726-P3WQ
3.6mm
700 TV lines
24
White
EV-2726-NVGQ
EV-2726-PVGQ
4~9mm
700 TV lines
36
Gray
EV-2726-NVWQ
EV-2726-PVWQ
4~9mm
700 TV lines
36
White
ENFORCER 3X Series Vandal Rollerball Camera
2 SECO-LARM U.S.A., Inc.
Table of Contents:
Programmable Features:
Exposure
Manually adjust the shutter speed, automatic gain
control (AGC), and digital slow shutter (DSS)
White Balance
Adjust the color temperature and image color of
the picture
Day / Night Mode
Adjust the level that the camera switches
between color and B/W when the ambient light
changes
Picture Adjustment
Adjust the camera’s brightness, contrast,
sharpness, hue, and gain
Digital Noise Reduction (DNR)
Adjust for less interference on the screen in an
area with low illumination
Wide Dynamic Range (WDR)
Provide clear images even under back light
circumstances where illumination intensity can
vary excessively
High Light Compensation (HLC)
Define target areas and remove spotlights to
make certain objects visible
Back Light Compensation (BLC)
Adjust the exposure to properly display the
subject in front of a bright light source
Privacy
Block out or emphasize a certain portion of the
image
Motion Detection
Detect if there is motion in the scene
Programmable Features………………
How to Use the OSD Controller...……
Main Setup Menu………………………
Menu Diagram.…………………………
Lens….……………………………........
Exposure………………………..………
White Balance…………………….……
Day/Night Mode….…………………….
Picture Adjustment………………………………
Wide Dynamic Range (WDR)..……………..….
Highlight/Back Light Compensation
(HLC/BLC)……………………………………….
Privacy..………………………………..…………
Motion Detection….……………………………..
Camera Setup…..……………………………….
Troubleshooting………………………………….
2
3 3 4~5
6
6~7
7~8
8~9
10
11 12
13
14
15
16
WDR OFF
WDR ON
DNR OFF
DNR ON
HLC ON
HLC OFF
BLC OFF
BLC ON
Privacy OFF
Privacy ON
Note: All screen images in this manual are simulated.
ENFORCER 3X Series Vandal Rollerball Camera
SECO-LARM U.S.A., Inc. 3 SECO-LARM U.S.A., Inc. 33 3
Main Setup Menu:
Menu items can be selected by using the OSD controller.
1. Press down on the joystick.
The Main Setup Menu will be displayed on the
monitor.
2. Move to and highlight the required function by
moving the joystick up and down.
3. Select the required function by pressing down
on the joystick
4. Change the menu setting by moving the joystick
left and right.
5. After choosing the settings, move the cursor to
SAVE ALL and press down on the joystick
6. After saving the settings, move the cursor to
EXIT and press down on the joystick.
Menu Diagram
A submenu is available where the menu displays .
Note:
How to Use the OSD Controller:
1. Press down on the joystick to open the on-screen display (OSD) menu.
2. Use the joystick to navigate the OSD menu.
3. To select an item, press down on the joystick.
OSD
Controller
ENFORCER 3X Series Vandal Rollerball Camera
4 SECO-LARM U.S.A., Inc.
Menu Diagram :
Continued on next page
SETUP MENU
SETTING
SETTING OPTIONS
1) LENS
(see page 6)
MANUAL
Set for fixed lens camera
DC
MODE: AUTO / OPEN / CLOSE
SPEED: 0~255 Level Adjustable
2) EXPOSURE
(see pages 6~7)
AUTO
High Luminance: MODE: SHUT + AUTO IRIS / AUTO IRIS
/ SHUT*
BRIGHTNESS: 0~255 Level Adjustable
Low Luminance: MODE: AGC / SLOW / AGC SLOW /
SLOW AGC / AGC SLOW
AGC / OFF
BRIGHTNESS: x0.25, x0.50, x0.75, x1.00
MANUAL
MODE: SHUT: SHUT: 1/63~1/10,000 sec
AGC: 6~44.8 dB
SLOW: SHUT: 2~256 FLD
AGC: 6~44.8 dB
WDR + SHUT: SHUT: 1/63~1/10,000 sec
AGC: 6~44.8 DB
3) WHITE BAL
(see pages 7~8)
PUSH
Disable white balance mode
USER1
B-GAIN: 0~255 Level Adjustable
R-GAIN: 0~255 Level Adjustable
USER2
B-GAIN: 0~255 Level Adjustable
R-GAIN: 0~255 Level Adjustable
ANTI CR
Enable anti-color rolling
MANUAL
LEVEL UP: Push enter to increase the gain level
LEVEL DOWN: Push enter to decrease the gain level
PRESET: Reset settings to default
PUSH LOCK
Disable white balance mode by pressing enter
ATW
SPEED: 0~255 Level Adjustable
DELAY CNT: 0~255 Level Adjustable
ATW FRAME: x0.5, x1.0, x1.5, x2.0
ENVIRONMENT: INDOOR / OUTDOOR
4) DAY/NIGHT
(see pages 8~9)
EXTON
POLARITY: ACTIVE LOW / ACTIVE HIGH
BURST: OFF / ON
IR OPT: OFF/ ON
MODE: CENTER / AUTO
LEVEL: 0~31 Level Adjustable
WDR: OFF / ON
AUTO
BURST: OFF / ON
DELAY CNT: 0~255 Level Adjustable
DAY NIGHT: 0~255 Level Adjustable
NIGHT DAY: 0~255 Level Adjustable
IR OPT: OFF/ ON
MODE: CENTER / AUTO
LEVEL: 0~31 Level Adjustable
WDR: OFF / ON
IR LED: OFF / FIX / DAY/NIGHT
LEVEL: 0~255 Level Adjustable
DRV: Not compatible with WDR camera.
POLARITY: ACTIVE LOW / ACTIVE HIGH
COLOR
Display color image
B/W
Display black and white image
*See page 6 for details
ENFORCER 3X Series Vandal Rollerball Camera
SECO-LARM U.S.A., Inc. 5 SECO-LARM U.S.A., Inc. 33 5
Menu Diagram Continued:
SETUP MENU
SETTING
SETTING OPTIONS
5) PICT ADJUST
(see page 10)
MIRROR
OFF / V-FLIP / H-FLIP / HV-FLIP
CONTRAST
0~63 Level Adjustable
SHARPNESS
0~15 Level Adjustable
HUE
0~100 Level Adjustable
R-GAIN
0~255 Level Adjustable
B-GAIN
0~255 Level Adjustable
DNR
LEVEL: OFF / LOW / MIDLOW / MID / MIDHIGH / HIGH
6) WDR
(see page 11)
NORMAL
No adjustable feature
LIGHT
CONTRAST: LOW / MIDLOW / MID / MIDHIGH / HIGH
FULL
CONTRAST: LOW / MIDLOW / MID / MIDHIGH / HIGH
7) HLC/BLC
(see page 12)
HLC
OFF / ON / AUTO
CLIP LEVEL
0~255 Level Adjustable
SCALE
0~15 Level Adjustable
BLC
OFF / ON
8) PRIVACY
(see page 13)
AREA SEL
Up to 15 selectable zones
MODE
ON / OFF
POSITION
Move the selected privacy zone
COLOR
White / Black / Red / Green / Blue / Yellow / Cyan / Magenta
TRANSP
0.00 / 0.50 / 0.75 / 1.00
MOSAIC
ON / OFF
9) MOTION DET
(see page 14)
OFF
Disable motion detection
ON
DETECT SENSE: 0~127 Level Adjustable
BLOCK DISP: OFF / ON
DETECT AREA: Set the area on the screen where motion
can be called attention to via blocks
MONITOR AREA: Set the area on the screen where motion
is highlighted via pink rectangle
10) CAMERA SETUP
(see page 15)
CAMERA ID
OFF / ON
E-ZOOM
MAG: 0~255 Level Adjustable
PAN: 0~1023 Level Adjustable
TILT: 0~511 Level Adjustable
DIS
OFF / ON
SYNC SETUP
Internal synchronization mode – Not adjustable
LANGUAGE
English / Chinese
CAMERA RESET
Resets all setting to default
11) EXIT
Exit menu and save settings
12) SAVE ALL
Save changes without exiting the menu
Loading...