Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS -compliant products.
E-931CS22RFCQ
Wireless Entry Alert System
Manual
For monitoring a driveway or for use as an entrance indicator
No wiring necessary between sensor and speaker
Sensor range: Up to 22ft (7m)
Sensor is weatherproof for outdoor use
Speaker makes chime or alarm sound if beam is interrupted
Wireless range: Up to 328ft (100m) between the sensor and speaker
Each sensor can be paired with an unlimited number of speakers
Each speaker can be paired with up to 5 sensors
ENFORCER Wireless Entry Alert System
2 SECO-LARM U.S.A., Inc.
Introduction:
The ENFORCER Wireless Entry Alert System is a self-contained easy-to-install alert system for commercial or home
applications. Each set contains a reflective photoelectric beam sensor that, when tripped, communicates wirelessly with a
speaker installed up to 328ft (100m) away*. An additional speaker may be installed to alert more than one area on the
property and an optional solar charger may be installed with the sensor for even more convenience.
Specifications:
Sensor
Speaker
Sensing range
Up to 22ft (7m)
N/A
Wireless range
Up to 328ft (100m)*
Operating frequency
433.92 MHz
Operating voltage
12VDC
Current draw
Standby
5mA
25mA
Active
20mA
100mA
Power input
2.5mm DC Jack
Light source
IR LED
N/A
Operating temperature
32°~122° F (0°~50° C)
Volume
N/A
0~90 dB
Alarm time range
N/A
3~30 s (Adjustable)
Speaker output
N/A
Chime/Off/Alarm (selectable)
IP Rating
IP55
N/A
Dimensions
31/4”x29/16”x11/2”
(82x66x38 mm)
31/4”x215/16”x19/16”
(83x75x40 mm)
Parts List:
Overview:
Optional Accessories:
Additional Wireless
Speaker
E-931ACC-SFQ
Digital Counter
E-931ACC-CQ
Replacement
Square Reflector
E-931ACC-R2Q
Solar Charger
for Sensor
E-931ACC-SPQ
Hood for Square and
Round Reflectors
E-931ACC-HR1Q
3” Round
Reflector
E-931ACC-RC1Q
Sensor
Reflector
Speaker
21/16”
(52mm)
23/8”
(61mm)
3
/8”
(9mm)
*Range may vary greatly depending on the installation and operating environment.
19/16”
(40mm)
215/16”
(75mm)
31/4”
(83mm)
Alert tone
selection
Counter output
Timer
Volume
2.5mm
DC Plug
Mode button
1x Sensor
1x Speaker
1x Reflector
2x Power adapters
1x Small screwdriver
1x Mode adjustment pin
1x Sensor mounting bracket
2x Reflector/Speaker mounting bracket**
2x Bolts (Sensor)
2x Bolts (Reflector)
4x Nuts
5x Mounting screws
1x Screw anchor
1x Manual
Cable length: 97/8” (250mm)
31/4”
(82mm)
11/2”
(38mm)
29/16”
(66mm)
2.5mm
DC Jack
Alignment
LED
**Reflector and Speaker use the same mounting bracket.
Loading...