Enforcer 1047651 User Manual
SAFETY DATA SHEET
A00442 ENF DUAL ACTION EDAIK17 20N17 STK
Version 1.2
Revision Date 07/06/2018
Print Date 01/16/2019
Material name
:
Enforcer Dual Action Insect Killer
EPA ID Number:
10807-161-40849
Material number
:
000000000001047651
Company
:
Zep Commercial Sales & Service, a unit of Zep, Inc.
Address
:
350 Joe Frank Harris Parkway, SE
Emerson, GA 30137
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Recommended use
:
Pesticide
Appearance
Aerosol containing a liquefied gas
Colour
white
Odour
neutral
Gases under pressure
:
Liquefied gas
Skin sensitisation
:
Category 1
Hazard pictograms
:
Signal word
:
Warning
Hazard statements
:
H280 Contains gas under pressure; may explode if heated.
H317 May cause an allergic skin reaction.
Precautionary statements
:
Prevention:
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P272 Contaminated work clothing should not be allowed out of
the workplace.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
Recommended use of the chemical and restrictions on use
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
GHS label elements
1 / 12
SAFETY DATA SHEET
A00442 ENF DUAL ACTION EDAIK17 20N17 STK
Version 1.2
Revision Date 07/06/2018
Print Date 01/16/2019
P280 Wear protective gloves.
Response:
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P333 + P313 If skin irritation or rash occurs: Get medical
advice/ attention.
P363 Wash contaminated clothing before reuse.
Storage:
P410 + P403 Protect from sunlight. Store in a well-ventilated
place.
P412 Do not expose to temperatures exceeding 50 °C/ 122 °F.
Disposal:
P501 Dispose of contents/container in accordance with local
regulation.
Substance / Mixture
:
Mixture
Chemical name
CAS-No.
Concentration [%]
butane
106-97-8
>= 10 - < 20
Distillates (petroleum), hydrotreated light
64742-47-8
>= 5 - < 10
propane
74-98-6
>= 3 - < 5
m-phenoxybenzyl 3-(2,2-dichlorovinyl)-2,2dimethylcyclopropanecarboxylate
52645-53-1
>= 0.1 - < 1
General advice
:
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.
If inhaled
:
If unconscious, place in recovery position and seek medical
advice.
Consult a physician after significant exposure.
In case of skin contact
:
If skin irritation persists, call a physician.
If on skin, rinse well with water.
If on clothes, remove clothes.
In case of eye contact
:
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
Rinse with plenty of water.
If swallowed
:
Keep respiratory tract clear.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
DO NOT induce vomiting unless directed to do so by a
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
The exact percentages of disclosed substances are withheld as trade secrets.
SECTION 4. FIRST AID MEASURES
2 / 12
SAFETY DATA SHEET
A00442 ENF DUAL ACTION EDAIK17 20N17 STK
Version 1.2
Revision Date 07/06/2018
Print Date 01/16/2019
physician or poison control center.
Take victim immediately to hospital.
Most important symptoms
and effects, both acute and
delayed
:
Effects are immediate and delayed.
Symptoms may include irritation, redness, pain, and rash.
May cause an allergic skin reaction.
Review section 2 of SDS to see all potential hazards.
Notes to physician
:
Treat symptomatically. Symptoms may be delayed.
Suitable extinguishing media
:
Water spray
Carbon dioxide (CO2)
Dry powder
Foam
Unsuitable extinguishing
media
:
High volume water jet
Specific hazards during
firefighting
:
Do not allow run-off from fire fighting to enter drains or water
courses.
Hazardous combustion
products
:
Carbon dioxide (CO2)
Carbon monoxide
Smoke
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
Personal precautions,
protective equipment and
emergency procedures
:
Use personal protective equipment.
Evacuate personnel to safe areas.
Ensure adequate ventilation.
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
SECTION 5. FIREFIGHTING MEASURES
SECTION 6. ACCIDENTAL RELEASE MEASURES
3 / 12
SAFETY DATA SHEET
A00442 ENF DUAL ACTION EDAIK17 20N17 STK
Version 1.2
Revision Date 07/06/2018
Print Date 01/16/2019
Advice on safe handling
:
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Do not breathe vapours or spray mist.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Always replace cap after use.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Keep in a dry, cool and well-ventilated place.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Oxidizing agents
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
butane
106-97-8
TWA
800 ppm
1,900 mg/m3
NIOSH REL
TWA
800 ppm
1,900 mg/m3
OSHA P0
PEL
800 ppm
1,900 mg/m3
CAL PEL
Distillates (petroleum),
hydrotreated light
64742-47-8
TWA
500 ppm
2,000 mg/m3
OSHA Z-1
TWA
400 ppm
1,600 mg/m3
OSHA P0
TWA (Mist)
5 mg/m3
OSHA Z-1
TWA (Mist)
5 mg/m3
OSHA P0
TWA (Mist)
5 mg/m3
NIOSH REL
ST (Mist)
10 mg/m3
NIOSH REL
PEL
(particulate)
5 mg/m3
CAL PEL
propane
74-98-6
TWA
1,000 ppm
ACGIH
TWA
1,000 ppm
NIOSH REL
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
4 / 12
Loading...