Enersound PA-200 User Manual

1

PA-200 PERSONAL WAISTBAND VOICE AMPLIFIER

USER MANUAL

2

3

TABLE OF CONTENTS

1. ABOUT THIS MANUAL ……………………………………………….......... 4

2. SAFETY PRECAUTIONS…….……………………………………………...4 - 9

3. GENERAL INFORMATION……………………………………………………..9

4. APPLICATIONS……………………………………………………………………..9

5. ACCESSORIES…………………………………………………………………9 - 10

6. SPECIFICATIONS………………………………………………………….10 - 11

7. OPERATING INSTRUCTIONS…………………………………………11 - 14

7.1 INSTALLING THE BATTERY……………………………………………11

7.2 CHARGING THE BATTERY……………………..……………….12 - 13

7.3 OPERATING THE DEVICE………………………………………13 - 14

8. LIMITED WARRANTY STATEMENT……………………………….14 - 15

4

1. ABOUT THIS MANUAL

Read this user manual carefully before using your Enersound’s PA­200 personal waistband amplifier. Use the product only as described
to avoid accidental injury, damage or hearing impairment. Also, read
safety warnings carefully. Keep this manual for future reference. If
you give this product to someone else, remember to include this
manual.

2. SAFETY PRECAUTIONS

Intended Use:

This product is designed for private use and is not intended for use
in emergency and/ or life-threatening situations.

HAZARD to Children

Your waistband amplifier is not a toy. Children should not be
allowed to play with it because they could hurt themselves and
others or damage the product. Packaging material, belts, cables and
small parts may cause choking, suffocation or strangulation.

Battery Precautions

Never use any charger or battery that is damaged in any way or that
is not the original one supplied with the equipment.

Do not dispose battery in household trash. Recycle it according to
local regulations.

5

Do not modify or remanufacture the battery as this could result in
serious safety hazards.

Follow battery usage, storage and charging guidelines.

Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged
and discharged hundreds of times, but it will gradually wear out.
When the operation time is noticeably shorter than normal, it is
time to buy a new battery.

If left unused, a fully charged battery will discharge itself over time.

Use only Enersound-approved batteries and recharge your battery
only with Enersound-approved chargers. When a charger is not in
use, disconnect it from the power source. Always disconnect the
charger from the unit and the wall once the charge is complete.
Misuse or use of incompatible batteries, and charging devices could
result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.

Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.

Do not leave the PA-200 amplifier or its battery in hot or cold places,
such as in a car in summer or winter conditions, as you will reduce
the capacity and lifetime of the battery. Always try to keep the
battery at room temperature. An amplifier with a hot or cold battery
may temporarily not work, even when the battery is fully charged.
Do not place this device in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, radiator or in direct
contact with fire.