Energy Tech Laboratories 105E User Manual

Introduction

The 105E colour monitor displays sharp and brilliant images of text and
graphics with a maximum resolution up to 1024x768 pixels. It is optimal
for Windows, spread sheets, and any other application.

This monitor automatically scans horizontal frequencies from 30KHz to
54KHz,and vertical frequencies from 50Hz to 120Hz.With microprocessor
based digital controlled circuit, the monitor can automatically adjust
itself to the video card’s scanning frequency and displays an image
with precise parameters you desire. The wide range of scanning
frequency supports variety of operating platforms, such as IBM PC and
compatibles, including Intel based platforms such as 386, 486, Pentium
and Pentium II .

Feature Highlights

• Digital Control feature provides user-friendliness and ease-of-use
when operating the monitor.

• Anti-Glare screen coating eliminate any bad effects caused by the
screen surface such as reflection of the room lights.

• 85Hz refresh rate:
The maximum display resolution is 1024 x 768 @60 hz non-interlaced

mode. The recommanded optimum resolution up to 800 x 600 pixels
non-interlaced by maximum 85Hz refresh rate.

• DDC1/DDC2B allows communication between the monitor and PC
system for optimal video configuration.

E
N

1

E
N

Note: If you experienced your monitor display is changing from color to
mono, it's possible that you are using a non-VESA-DDC-standard video
card. Please consult with your local PCEC dealer for more information.

ENERGY STAR
As an ENERGY STAR

product meets the ENERGY STAR
IBM, IBM PC and Power PC are registered trademarks of International

Business Machines Corporation.

is a U.S. registered mark.

®

Partner, PCEC has determined that this

®

guidelines for energy efficiency.

2

Safety precautions and maintenance

◆ Disconnect the monitor from the mains supply if the monitor is not to
be used for an extended period of time.

◆ Do not attempt to remove the back cover, as you will be exposed to
a shock hazard. The back cover should only be removed by qualified
service personnel.

◆ Do not place objects on top of the monitor cabinet, which could fall
into vents or which could cover them and prevent proper cooling of
the monitor’s electronic devices.

◆

Do not expose the monitor to rain or excessive moisture to avoid the
risk of shock or permanent damage to the set.

◆ Do not use alcohol or ammonia based liquid to clean the monitor. If
necessary, clean with a slightly damp cloth. Disconnect the monitor
from the mains supply before cleaning.

◆ Consult a service technician if the monitor does not operate normally
when operating instructions of this manual are followed.

Package

Your 105E package includes the following items:

• The monitor

• Pedestal

• Power cord

• Interface cable (flying-in)

• Win95 driver disk

E
N

End of life disposal

Your new set contains materials which can be recycled and reused.
Specialized companies can recycle your product to increase the amount
of reusable materials and to minimize the amount of materials to be
disposed of.

Please inform yourself on local regulations on disposal of your old set.

3

E
N

Installation

Important: Please refer to the user’s manuals of your computer
and video adapter to make sure these equipments are properly
installed and configured before installing the monitor.

Positioning / Ventilation

◆ Avoid exposing the monitor to direct sunlight, stoves or any other
heat sources.

◆ To prevent overheating, make sure that the ventilation openings of
the monitor are not covered.

◆ Keep moisture and dust away.

◆ Keep away from any magnetic objects, such as speakers, electric

motors, transformers, ...etc.

◆ When positioning this monitor, make sure that the mains plug and
socket are easily accessible.

Pedestal

With the built-in pedestal you can tilt and / or swivel the monitor for a
most comfortable viewing angle.

To fit the pedestal, refer to the illustration on the inside front-cover of
this manual.

E

105

FUNC.

RECALL

4

Connection

Important: Please make sure the AC power to your computer is
“OFF” before connecting or disconnecting any display
peripheral. Failure to do so may cause serious personal injury
as well as permanent damage to your computer equipments.

Intel Based platform: 386, 486, Pentium, or other compatibles:

• Connect the monitor to the computer using the supplied interface
cables.

Monitor rear view

1) IBM PC connection

2) Mains connection

WARNING:SHOCK HAZARD-DO NOT OPEN
AVIS:RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
PRECAUCION RIESGO DE CHOQUE ELECTRICO,NO ABRIR

E
N

2

1

5