ENERGY STAR FSRD User Manual

FSRD Series 43” User Guide

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the
product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read
the following precautions carefully before using the product.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade and the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

PACKAGE CONTENTS

SCEPTRE Display x 1
Display Foot x 2
User Guide x 1
Screws x 4
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

FSRD Series

Page | 1

ATTACHING & REMOVING TWO LEGGED STAND

1. Place the display unit flat on a table with the screen facing down. Afterwards attach the plastic feet onto
the bottom of the TV. Install the foot labeled L to the left side of the TV (when you are facing the back of
the TV). Install the foot labeled R to the right side of the TV (when you are facing the back of the TV).
Afterwards insert and tighten the 2 screw to the bottom of each foot.

2. To finalize your installation of the Display, please read the following:

a. If you are placing the Display on a stand, we would recommend you to use a Display safety

strap (not included) in order to minimize the possibility of the Display toppling over.

b. If you are mounting the Display on the wall

i. Make sure the wall is structurally safe for the weight of the Display

ii. Make sure the wall mount kit is compatible with the Display
iii. Read and follow all instructions provided by the wall mounting kit.
iv. Securely install all screws and connections.

FSRD Series

Page | 2

Rear View Mounting Pattern

Mounting Specification: 200mm x 200mm using 4 screws sized at M6 x 18mm (not included).

FSRD Series

Page | 3

Connecting Your Cables

The following picture offers a suggestion for connecting most of your audio video equipment.

TV Tuner is optional. It may or may not be equipped in your product. Please check with the authorized seller, authorized
distributor or Sceptre Customer Service for further information.

FSRD Series

Page | 4