Energizer ENJ1000 Instruction Manual

DÉMARREUR + CHARGEUR SANS FI L
JUMP STARTER WIRELESS CHARGER
model no. ENJ1000
IMPORTANT:
Please read this manual carefully before operating this jum
4010229
INSTRUCTI ON MANUAL
SAFETY
INFORMATION
2
model no. ENJ1000 | contact us 1-866-295-6775
WARNING
Always wear safety glasses when jump starting a battery, and gloves when handling a battery.
When jump starting a vehicle please ensure that the clamp connection is securely fitted into the jump starter socket. Ensure the battery clamps are connected correctly, and the connectors are free from rust and dirt. Do not allow this product to become wet. Do not immerse the product in water. Do not operate the product in explosive atmospheres, such as in the presence of flammable liquid, gas or dust. Do not modify or disassemble this product. Do not store in locations where the temperature may exceed 140°F (60°C). Charge only using the charger provided. Under extreme heat conditions, battery leakage may occur. Avoid contact with your skin. In case of skin or eye contact, rinse immediately with clean water and seek medical attention.
BATTERY DISPOSAL
The battery is self-contained and not consumer replaceable. The battery must be disposed of properly when it no longer holds a charge. Proper charging practices will increase the life of the product. For Information on battery recycling, call toll-free 800-822-8837. For information regarding air travel safety with batteries please reference this website by the U.S. Department of Transportation: http://phmsa.dot.gov/safetravel/batteries
NOTE: This Car jump starter and portable power bank contains the equivalent of 2.4g of lithium and gives 26.7 watt hours of power.
PROP 65 WARNING
This product contains lead, a chemical known to the state of California to cause cancer, birth defects or other reproductive harm.
3
CHARGING
TO CHARGE YOUR JUMP STARTER
At home:
1. Plug the AC Power Adaptor into any 120V outlet.
2. Attach the DC plug into the USB-C port on the Power Bank with the
equipped USB-A to USB-C cable
In the Car:
1. Plug the car adaptor into the socket of cigarette lighter.
2. Attach the DC plug into the USB-C port on the Power Bank with the
equipped USB-A to USB-C cable.
TO POWER YOUR MOBILE DEVICES
Use the original manufacturer's USB cable that came with your device and plug it into the USB output ports. The USB charging port can charge at 5V/2A, 9V/2A or 12V/2A compatible Quick Charge technology devices or charges non–Quick Charge devices at up to 2.4A. Once you charge your device, the power level gauge will show the battery level. To check the power capacity again, simply press the power button once.
TO CHARGE USING WIRELESS CHARGING SURFACE
Make sure your device is Qi-compatible. If the case is metal, remove prior to charging. If you are having issues charging, remove your case and try again. Place the Qi­compatible device directly onto the indicated wireless charging icon. Your device will display the charging progress. Charging time will depend on the type of device.
Do not place magnetic cards or similar items near this product. Place the unit on a sturdy and flat surface during charging. Keep the unit out of reach of children
Loading...
+ 7 hidden pages