Energizer ENG-BT1001 Quick Start Manual
Technical Specications
• Bluetooth® Specication V2.1 class 2
• RF frequency range: 2.402-2.480GHZ,
2.4G ISM band
• Radio performance: Receive Sensitivity
of -92dBm, TX Power Max 4dBm
• Supports Bluetooth headset and
handsfree proles, supports A2DP
• 4 button design: easy-to-operate
On/Off slide switch, MFB, VOL+, VOL-
• LED indicator status: blue, red
• Rechargeable li-polymer battery
• Micro 5 pin charging port
• Nominal charging time: max 2 hours
Universal Wireless Bluetooth® Headset
ENG-BT1001
• Talk time: up to 6 hours
• Standby time: up to 200 hours
• Operating temperature: -10°C~50°C
• Storage temperature: -20°C~60°C
Features
• Cancels out unwanted background noise, leaving your conversation crystal clear.
• Provides 6 hours of continuous wireless hands-free talk.
• Provides 200 hours of standby time.
• Easily pair/disconnect to your mobile device using the ON/OFF switch.
• Provides in-ear ergonomic fit with extra ear gels and ear hooks that can be worn on either ear.
• Control your volume from the headset.
• Rechargeable battery charges by USB cable to either wall outlet (using AC Charger adapter) or
your computer’s USB port.
1-Year Limited Warranty
Premier Accessory Group, LLC. warrants that the enclosed product will be free from defects in materials and workmanship for a period of 1 year from
the date of initial retail purchase. This warranty is for the original retail purchaser only and is not transferrable. This warranty does not cover
damage caused by accident, unreasonable use or modications to the product. During the 1-Year Warranty period we will either repair or replace
this product (at our option). Please include a money order or cashier’s check for the amount of $4.95 for shipping and handling of this product.
Send product to:
Premier Accessory Group
Attn: Product Support Center
11-11 44th Drive
Long Island City, N.Y. 11101
This guarantee gives you specic legal rights, and you may also have other rights which vary from state to state.
Energizer and other marks, including graphics, are trademarks of Energizer and are used under license. All other trademarks, brand names or
product names are the property of their respective owners and are not affiliated with Energizer or Premier Accessory Group, LLC.
© 2012 Premier Accessory Group, LLC. All rights reserved.
Questions? Visit www.PremierAccessoryGroup.com or call 1-888-492-8338 Toll Free
Functions
Charging Socket
(Green=ON, Red=OFF)
Microphone
Call Button
Answer/end a call
Power Switch
Power ON/OFF
Indicator
Light
Volume up/down
Basic use:
1. To make a call, use your phone in the normal way
when the headset is connected to your phone.
2. To answer a call, press and release the Call Button
or press the answer key on your mobile phone.
3. To end a call, press and release the Call Button or
press the answer key on your mobile phone.
4. To redial the last number, press and hold the
volume up button for 3 seconds.
Note: Not all phones support this feature.
5. To reject an incoming call, press and hold the Call
Button for 3 seconds until you hear a short beep.
6. To adjust the volume, press volume up or volume
down to increase or decrease the volume level.
7. To mute the microphone (place the call on hold),
press and hold the volume down button for 3
seconds. You will hear a beep.
8. To unmute the microphone (take the call off
hold), press and hold the volume down button
for 3 seconds. You will hear a beep.
Charging the headset:
1. Connect the charging pin of the USB cable to the
charging socket of the headset.
2. Connect the other end of the USB cable to either
the AC Charger (and plug into a wall A/C outlet)
or the computer’s USB port.
The red LED indicator light turns on while the
headset is charging.
The red LED indicator light shuts off when the
headset is fully charged (approximately 2-3
hours).
Note: When the battery is running low, the red
LED indicator light starts to ash along with a
warning beep.
Note: Unplug the charger from the wall outlet
and the device when not in use. Do not leave a
fully charged battery connected to a charger,
since overcharging may shorten its lifetime.
Switching the headset on/o:
1. To switch on, set the Power Switch to the ON
position (green). The indicator light will ash
blue.
2. To switch off, set the Power Switch to the OFF
position (red). The indicator light will ash red
before the headset shuts off.
Pairing for the rst time:
1. Ensure the Bluetooth headset is within 3 feet of
your mobile phone or Bluetooth enabled device.
2. Set the Power Switch to the ON position.
3. When the indicator light ashes red and blue
alternately, you can connect the headset to your
Bluetooth enabled device.
Note: If the rst time pairing was unsuccessful or
for future paring, manually pair the headset to
your Bluetooth enabled device.
Manually pairing the headset:
1. Ensure the Bluetooth headset is within 3 feet of
your mobile phone or Bluetooth enabled device.
2. Set the Power Switch to the ON position.
3. Press and hold the Call Button until the indicator
light ashes red and blue alternately. The
blinking red and blue lights indicate that the
headset is in pairing mode .
Note: To enter pairing mode at any time, you
must press and HOLD the Call button down for
approximately 8 seconds.
4. Set your mobile phone to search for Bluetooth
devices. When your mobile phone nds the
headset, conrm by selecting ENGBT1001 from
the list.
5. Enter the passcode “0000” when prompted by the
phone. Select “Pair” to complete the pairing
process.
Note: If the Bluetooth version of your Bluetooth
mobile phone is V2.1, you will not need to enter a
passcode during above pairing process.
6. If the pairing is successful, the headset’s indicator
light turns to standby mode and ashes once
every three seconds.
Energizer and other marks, including graphics, are trademarks of Energizer and are
used under license. All other trademarks, brand names or product names are the
property of their respective owners and are not affiliated with Energizer or Premier
Accessory Group, LLC.
Loading...