1-800-383-7323 / USA
1-800-383-7323 USA/CAN
1-800-383-7323 / CANADA
www.energizer.com
ENERGIZER 371/370
Industry Standard Dimensions
mm (inches)
3.80 (0.150)
9.50 (0 .374)
9.25 (0 .364)
0.25 (0.010) Maximum Ref.
Permissible deflection from a flat
0.03 (0.001) Minimum Ref.
(applies to top edge of gasket or
edge of crimp, whichever is higher)
Minimum
2.10 (0 .083)
1.85 (0.073)
1.95 (0.077) Ref.
1.70 (0.067) Ref.
SILVER OXIDE
Specifications
Chemical System: Silver Oxide (Zn/Ag2O)
Designation: IEC-SR69
Nominal Voltage: 1.55 Volts
Typical Capacity: 34 mAh* (to 1.3 volts)
Capacity Test: 30K ohm continuous drain at 21°C
Typical Weight: 0.7 grams (0.023 oz.)
Typical Volume: 0.15 cubic centimeters (0.009 cubic inch)
Impedance (40 Hz): 5 to 15 ohms
* Varies according to the applied load, temperature, and cutoff voltage.
Cross Section
Anode Cap
Gel Anode
Gasket
Can
Separator
DESIGNED FOR USE ON CONTINUOUS LOW DRAIN
HIGH PULSE ON DEMAND
Typical Discharge Characteristics
Typical Performance at 21°C (70°F)
Schedule: Continuous
Typical Drain @1.55V:
0052 milliamperes
Load: 30K ohm
1.7
1.6
1.5
1.4
1.3
1.2
Voltage, CCV
1.1
1.0
0 200 400 600 800
Service, Hours
Schedule
Continuous 0.052
Typical Drains
at 1.55V
(milliamperes)
Load
(ohm) (hours)
30K 665
Cutoff
1.3V
Temperature Characteristics
Typical Performance at Low Discharge Rates
Service Effects
125
100
75
50
25
Service (%)
0
-20 0 20 40
Temperature (C)
Storage Effects
100
90
80
70
Service (%)
60
024681012
40°C
Storage Time (yrs)
0°C
20°C
Cathode
This datasheet contains typical information specific to products manufactured at the time of its publication.
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Form No. EBC - 4360A Page 1 of 1
Important Notic