Energetic Lighting LED Shoebox Fixture Installation Instructions Manual
LIGHTING
LED Shoebox Fixture
Model # E1SB series
Installation Instructions
ATTACH YOUR RECEIPT HERE
Item Number
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-492-6566.
Purchase Date
www.energeticlighting.com
1
PACKAGE CONTENTS
INSTALLATION INSTRUCTIONS
A
Part Item Name Qty.
A
Fixture
B
Mounting Adapter (packaged
separately)
B
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or
install the product. Failure to do so could lead to electric shock, fire or other injuries that
could be hazardous or even fatal.
Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or
•
turn off the circuit breaker.
Changes or modifications not expressly approved by the party responsible for compliance
•
could void the user’s authority to operate the equipment.
This product must be installed in accordance with local, state and national electrical codes.
•
Installation work shall be completed by a licensed installer that is familiar with the
•
construction and operations of the product.
Round prole post mount installation:
1
Mounting hardware used:
1
AA
Wire Nut
Qty. 3
Mounting Adapter
BB
Screws
Qty. 4
1. Remove the 4 screws located on the back of the
fixture (A) at the entrance to the wiring compartment.
Note that the gasket secured against the perimeter
Note:
Gasket around
perimeter
needs to be retained for proper mounting adapter (B)
re-assembly.
A
CAUTION:
The fixture body is one piece. Do not disassemble it.
•
NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
•
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
•
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on. The
user is encouraged to try to correct the interference by one or more of the following
measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and the receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV technician for help.
2. Connect the wires from the fixture (A) to the wires on
the mounting adapter (B), black to black, white to
white, and green to green, securing each with a wire
nut (AA).
Fig. 1
AA
A
B
Fig. 2
•
This Class B digital apparatus complies with Canadian ICES-003.
www.energeticlighting.com www.energeticlighting.com
32
Loading...