Energetic Lighting E1STA Series, E1STA150 Series Installation Instructions Manual

LIGHTING

LED Streetlight Fixture

Model # E1STA series

Installation Instructions

ATTACH YOUR RECEIPT HERE

Item Number

Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-492-6566.

Purchase Date

www.energeticlighting.com

1

PACKAGE CONTENTS

A

Part Item Name Qty.

A

Fixture

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or
install the product. Failure to do so could lead to electric shock, fire or other injuries that
could be hazardous or even fatal.

Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or

•

turn off the circuit breaker.
Changes or modifications not expressly approved by the party responsible for compliance

•

could void the user’s authority to operate the equipment.
This product must be installed in accordance with local, state and national electrical codes.

•

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE

•

INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

CAUTION:

The fixture body is one piece. Do not disassemble it.

•

MIN 90°C SUPPLY CONDUCTORS.

•

SUITABLE FOR OPERATION IN AMBIENT NOT EXCEEDING 40°C.

•

SUITABLE FOR WET LOCATIONS.

•

SAFETY INFORMATION

NOTICE

•

This equipment has been tested and found to comply with the limits for a Class B digital

1

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on. The
user is encouraged to try to correct the interference by one or more of the following
measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and the receiver.

-

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-

Consult the dealer or an experienced radio/TV technician for help.

•

This Class B digital apparatus complies with Canadian ICES-003.

INSTALLATION INSTRUCTIONS

1. Back out the 2 lock screws on the base of the fixture
(A) just enough to clear the diameter of the mounting
pole.

Back out
lock screws

A

NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

•
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

www.energeticlighting.com www.energeticlighting.com

2. Connect the wires from the fixture (A) to the supply
wires from the mounting pole: black to black, white to
white, and green to green.

32

Fig. 1

Mounting Pole

A

Fig. 2