User Manual
Energenie MiHome Monitor adapter
The Monitor adapter is part of the MiHome home automation
range. The Monitor adapter allows you to monitor the power
being used by an attached appliance. It links to the MiHome
Gateway which provides the communications between your
adapter and the internet.
2
Pairing the Monitor Adapter
To use the adapter in your
MiHome system it must be
first “paired” with the
Gateway.
Please ensure that your device
is in range of the Gateway
when you pair it. We suggest
10 metres or so as unobscured
by furniture or walls etc. as
possible.
You have two options to pair your adapter to the Gateway:
either via a bowser on a PC or smart device or via your smart
device App.
You will need to have created an account and already
installed the MiHome Gateway that you will use.
3
Via a Browser:
Select the option to pair a new device and choose the
Monitor adapter to be registered.
Follow the instructions to hold down the button on the front
of the housing of the adapter until you see the device come
up on the screen as being paired.
Via the App on your smartphone:
Follow the instructions on the screen when you run the App
to pair a Monitor adapter.
Please note that after pairing, your adapter may be moved
into different locations. You should be able to control it at a
range of at least 25 metres in open air. Less if behind
furniture or a wall etc.
4
If you are having trouble with the range move your adapter
closer to the Gateway or move an obstruction that may
affect the signal.
Using the Dashboard
You can view and control your paired device by selecting the
Dashboard option on your App or via the browser.
5
Technical Specification
Electrical
Maximum load: 3000W, 13A
Voltage range: 230-250V 50Hz ac
Plug and socket: BS5733 and BS1363
Insulation: Class II
Radio
Transmission Frequency: 434.300 MHz
Tx duty cycle: <10%
Modulation: FSK, Manchester encoded
Transmission Interval: 10s
Protocol: OpenThings
Environmental
Operating temperature: 0°C to 40°C
Storage temperature: -40°C to 85°C
6
Location: Indoor use only
Mechanical
Plug adapter housing in UK format
7
Troubleshooting
1. Please ensure that you do not plug MiHome adapters
into adjacent sockets in a wall socket or extension lead.
There should be several metres distance between
individual adapters.
2. Any local source of radio noise may effect operation of
the system. This may include poorly regulated fans or
other devices running electric motors, noisy power
supplies or other low quality electrical and electronic
equipment including LED lights.
3. If your attempt to pair and adapter fails please try
again. Occasionally the signals between devices may be
subject to noise or other outside interference which is
common for radio systems of this nature.
4. The range of communication between your Gateway
and the device will be affected by anything in between
that may obscure the signal such as furniture, walls,
ceilings, windows, doors etc.
8
For further help please look online at
mihome4u.co.uk/help or contact us at
support@mihome4u.co.uk
9
Declaration of Conformity
Sandal Plc trading as Energenie declare under our sole
responsibility as importer that the product:
Model: MIHO004 is in accordance with the following
Directive(s):
2006/95/EC Low Voltage Directive (LVD)
2014/53/EC R&TTE Directive (Article 3.1b and 3.2)
2002/96/EC Waste Electrical and Electronic
Equipment (WEEE) Directive
2011/65/EU Restriction of the Use of Certain Hazardous
Substances (RoHS) Directive Recast
The unit complies with all essential requirements of the
above referenced specifications and directives and has been
issued a CE mark as per directive 93/98/EEC.
10
The Technical Construction File required is maintained at the
company headquarters at 5 Harold Close, The Pinnacles,
Harlow, Essex, England, CM19 5TH.
11
Caution
Please be aware that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
Energenie and MiHome are brand names of Sandal Plc.
Registered Office: Claremont House, Deans Court, Bicester,
Oxon, OX26 6BW
12
Other Notices
THIS DEVICE AND ASSOCIATED SOFTWARE ARE NOT DESIGNED,
MANUFACTURED OR INTENDED FOR USE OR RESALE FOR THE
OPERATION OF NUCLEAR FACILITIES, THE NAVIGATION, CONTROL
OR COMMUNICATION SYSTEMS FOR AIRCRAFT OR OTHER
TRANSPORTATION, AIR TRAFFIC CONTROL, LIFE SUPPORT OR LIFE
SUSTAINING APPLICATIONS, WEAPONS SYSTEMS, OR ANY OTHER
APPLICATION IN A HAZARDOUS ENVIRONMENT, OR REQUIRING
FAIL-SAFE PERFORMANCE, OR IN WHICH THE FAILURE OF
PRODUCTS COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY,
OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE
(COLLECTIVELY, "HIGH RISK APPLICATIONS"). YOU AGREE AND
ACKNOWLEDGE THAT YOU HAVE NO LICENSE TO, AND SHALL NOT
(AND SHALL NOT ALLOW A THIRD PARTY TO) USE THE PRODUCT IN
ANY HIGH RISK APPLICATIONS, AND WHERE PERMITTED BY LAW
SANDAL PLC SPECIFICALLY DISCLAIMS ANY WARRANTY REGARDING,
AND ANY LIABILITY ARISING OUT OF, HIGH RISK APPLICATIONS.
13
Copyright Notice
© 2015 Sandal Plc.
User Manual
Part no: MIHO004
Loading...