How it Works
Energate
Loading...
Z100 Pioneer 2

Energate Z100 Pioneer 2 Operating And Installation Manual

AW001065-B
Operating and
Installation Manual
Page 2
Page 3
Operating and Installation Manual
Congratulations on the purchase of your new thermostat. It has been designed for easy programming to save on energy costs and allow a comfortable living environment.
Features:
Auto programming mode for your yearly heating and cooling needs Easy adjustment of temperature and schedule Energy efficient presets to help reduce heating and cooling costs Wirelessly communicates with your utility Notifies you and automatically responds to utility demand response events Provides you with the current price of energy or rate tier Allows you to select from a range of comfort and savings levels when energy prices
increase
Large, easy to read backlit display Silent operation Protection against short circuits during installation
Page 4
Table of Contents
OPERATING THE THERMOSTAT ............................................................................................. 8
Navigating the Controls .............................................................................................................. 8
Home Screen ............................................................................................................................. 9
Heat / Cool / Fan Icons ......................................................................................................... 11
Setpoint Value Display .......................................................................................................... 11
HELP button ............................................................................................................................. 12
Title Bar .................................................................................................................................... 12
Default Schedule ................................ ...................................................................................... 13
Temporary Temperature Hold ................................................................................................... 15
Heating and Cooling Modes ...................................................................................................... 17
Fan Modes ............................................................................................................................... 18
Main Menu ............................................................................................................................... 19
Temperature Settings ................................ ................................................................ ............... 20
Quick Schedule ........................................................................................................................ 21
Schedule Type ......................................................................................................................... 22
Setpoints .............................................................................................................................. 23
Schedule Times .................................................................................................................... 24
Hold Screen - Permanent, Timed, and Temporary Temperature Holds ...................................... 26
Setting the Date & Time ............................................................................................................ 30
Energy Events and Price Events ............................................................................................... 32
Energy Events (also known as DRE / DRLC events) ................................................................. 32
Page 5
Voluntary and Mandatory Energy Events............................................................................... 33
Starting a Temporary Temperature Hold during an Energy Event .......................................... 34
Price Conservation Event ......................................................................................................... 35
Energy Options ......................................................................................................................... 36
Conservation Menu .................................................................................................................. 39
The following are the default maximum adjustment and LED settings. ....................................... 41
Note: Your utility may have selected different values. ................................................................ 41
Indicators of Energy Events and Savings .................................................................................. 42
User Options ............................................................................................................................ 43
Display ................................................................................................................................. 43
Language ............................................................................................................................. 44
Filter Reminder ..................................................................................................................... 45
Time ..................................................................................................................................... 45
See Setting Date and Time (page 28).Temperature ................................ .............................. 45
Service Information ............................................................................................................... 47
Power Outages ......................................................................................................................... 47
Utility Text Messages................................................................................................................ 48
INSTALLATION AND MAINTENANCE ................................ .................................................... 49
Mounting the Thermostat .......................................................................................................... 49
Mounting the Thermostat (continued) ........................................................................................ 50
Mounting the Thermostat (continued) ........................................................................................ 51
Mounting the Outdoor Sensor ................................................................................................... 52
Cleaning the Thermostat........................................................................................................... 52
Page 6
Removing Thermostat Front Housing from Backplate ............................................................... 53
Replacing the Battery ................................................................................................ ............... 54
Wiring Configuration ................................................................................................................. 55
Setup Menu Options ................................................................................................................. 56
Password .............................................................................................................................. 56
Setpoint Range ..................................................................................................................... 58
Equipment Type .................................................................................................................... 58
Equipment Settings ............................................................................................................... 59
Conventional Systems ....................................................................................................... 59
Heat Pump Systems................................................................ .......................................... 60
Equipment Cycling ................................................................................................................ 61
Conventional Systems ....................................................................................................... 61
Heat Pump Systems................................................................ .......................................... 62
Control Options ..................................................................................................................... 63
Device Info Screen................................................................ ................................................ 64
ZigBee Link Info Screen ........................................................................................................ 66
Reset Screen ........................................................................................................................ 68
Thermostat Reset .............................................................................................................. 69
User Configuration Reset .................................................................................................. 71
Security Keys Reset .......................................................................................................... 71
Conventional System Test ................................................................ ........................................ 72
Heat-Pump System Test ........................................................................................................... 73
Product Conformity ................................................................................................................... 74
Page 7
Caution ..................................................................................................................................... 74
Note: ........................................................................................................................................ 75
Page 8
OPERATING THE THERMOSTAT
Navigating the Controls
The function of the LEFT and RIGHT TAB buttons appears on the bottom of the display screen.
Page 9
Use the SCROLL (▲ ▼) buttons to adjust the temperature, move through the menus options, and change highlighted values. Press the MENU / SELECT () button to access the menu as well as to select or accept highlighted menu items.
Home Screen
The Home screen displays current temperature and operation data. When the Home screen is in idle mode, the backlight is on with a high brightness level by default, and this level may be lowered (see User Options). Please note that icons such as heat or fan are animated when the equipment is running.
Page 10
Note: A SETPOINT (e.g., LEAVE) is identified by a name and specifies both heating and
cooling target temperatures. See the Temperature Settings section for additional information.
By just pressing any of the buttons, the Home screen becomes Active, the backlight brightens and the MODE and FAN tabs are shown.
Pressing the LEFT TAB button changes the thermostat mode (COOL/HEAT/AUTO/EMERG/OFF). The available options for the thermostat mode will depend on the type of heating or cooling equipment at your home. Pressing the RIGHT TAB button changes the fan mode (ON/AUTO)
Pressing the SCROLL (▲ ▼) buttons makes the temperatures of the SETPOINTs higher (warmer) or lower (cooler). You can accept the changes by pressing the LEFT TAB, which will be displaying ACCEPT, or you can walk away after making the changes. They will be automatically accepted when the screen goes to the idle mode (i.e. the backlight diminishes).
To see the different menu items displayed, the MENU / SELECT () button needs to be pressed once when the screen is active or twice when it is in the Idle mode.
Page 11
Heat / Cool / Fan Icons
Icon
Description
Heating mode (animated when furnace or heat pump is on).
Cooling mode (animated when air conditioning or heat pump is on).
Auxiliary heating on (animated).
More than one heating stage on (animated).
More than one cooling stage on (animated).
Fan (animated when on).
Setpoint Value Display
The thermostat is controlling the HVAC equipment to keep the home at the displayed Setpoint temperature, and will heat or cool accordingly.
An up arrow indicates the thermostat is pre-heating in advance of a schedule or price conservation event or that it is gradually increasing the temperature for a price conservation event.
A down arrow indicates the thermostat is pre-cooling in advance of a schedule or price conservation event or that it is gradually decreasing the temperature for a price conservation event.
Page 12
HELP button
The thermostat’s HELP button provides you with information on how to navigate through the individual menu screens. It will help you to quickly change settings without having to refer to this user manual; however, it does not replace this manual, so please keep this manual for future reference.
Title Bar
The left hand side of the Title Bar displays an icon showing the state of the communications link with the utility’s network (signal quality).
means Link OFF, means Link ON, and varies from lowest signal quality (1 bar) to highest signal quality (5 bars).
When the communications link is on, the network automatically updates the date and time in your thermostat periodically. If the communications link is off, you need to set the current date and time as explained in Setting the Date & Time section (page 28).
The Title Bar also displays the current electricity rate if your utility company provides energy price information over the communication link. The price is displayed either in $ value/KWH (default) or by the price tier name. This is assigned by your utility to different rates (e.g. normal, low, medium, high, critical peak). By pressing the MENU / SELECT button and selecting the USER OPTIONS menu item in the MAIN MENU, and then selecting PRICE DISPLAY, you can choose which of the two ways the current price is displayed.
?
Page 13
Default Schedule
The thermostat’s schedule is factory programmed with the Energy Efficient START TIMES and SETPOINTS listed below (note your utility may have selected different default values).
Note: A SETPOINT has a pre-set name and specifies both heating and cooling target
temperatures, as explained in detail in the Temperature Settings section.
This default schedule may be modified as desired to meet your comfort and schedule requirements. The thermostat anticipates the time required to reach a desired temperature prior to the start of the SETPOINT time; therefore, you only need to set the desired time for the SETPOINT temperature.
SCHEDULE – Fahrenheit Scale
Monday to Friday
Saturday & Sunday
START TIMES
SETPOINT
START TIMES
SETPOINT
NAME
HEAT
COOL
NAME
HEAT
COOL
6:00 am
Wake
70.0°F
78.0°F
8:00 am
Wake
70.0°F
78.0°F
8:00 am
Leave
62.0°F
85.0°F
6:00 pm
Return
70.0°F
78.0°F
11:00 pm
Sleep
62.0°F
82.0°F
10:00 pm
Sleep
62.0°F
82.0°F
Page 14
Default Schedule (continued)
SCHEDULE – Celsius Scale
Monday to Friday
Saturday & Sunday
START TIMES
SETPOINT
START TIMES
SETPOINT
NAME
HEAT
COOL
NAME
HEAT
COOL
6:00 am
Wake
21.1°C
25.6°C
8:00 am
Wake
21.1°C
25.6°C
8:00 am
Leave
16.7°C
29.4°C
6:00 pm
Return
21.1°C
25.6°C
11:00 pm
Sleep
16.7°C
27.8°C
10:00 pm
Sleep
16.7°C
27.8°C
Page 15
Temporary Temperature Hold
A Temporary Temperature Hold allows you to temporarily make the temperature warmer or cooler without affecting the pre-set programming. The thermostat will remain at the Temporary Hold temperature until the next scheduled SETPOINT.
From the Home screen, press either of the SCROLL buttons to adjust either the HEAT (if the current operating mode is HEAT) or the COOL (if the current operating mode is COOL) of the active target SETPOINT, shown below the room temperature, with two arrows beside it.
To accept the adjusted SETPOINT press the LEFT TAB .To cancel, press the RIGHT TAB. Note that even if you don’t press the ACCEPT tab, the Temporary Hold will take effect when the screen goes on idle (i.e. the screen backlight diminishes).
When the thermostat mode setting is AUTO, pressing the MENU / SELECT button will switch between the HEAT and COOL
SETPOINTS (i.e. the screen will show “ADJUST HEAT” or “ADJUST
COOL” respectively). The LEFT TAB accepts the Temporary Hold
settings and the RIGHT TAB cancels them.
Page 16
Temporary Temperature Hold (continued)
Once the Temporary Hold is in effect, the SETPOINT name will be replaced by TEMPORARY. Note that a Temporary Hold can also be set by scrolling to the HOLD menu item at the Main Menu and selecting TEMPORARY as the Type of Hold, as it is explained further in the section describing the HOLD screen.
To CANCEL a Temporary Hold, press any of the SCROLL buttons to return to this screen. Press the RIGHT TAB to cancel the HOLD, or LEFT TAB to accept it (continue the hold) and return to the normal Home screen.
Page 17
Heating and Cooling Modes
The thermostat is pre-set for heating operation (HEAT) but, as explained when describing the HOME SCREEN, you can manually (by pressing the LEFT TAB) change the thermostat mode between AUTO, HEAT, COOL, OFF, and EMERG.
The available options for the thermostat mode will depend on the type of heating or cooling equipment at your home.
AUTO:
The thermostat automatically selects heating or cooling based on the indoor temperature.
HEAT:
The thermostat controls only the heating system.
COOL:
The thermostat controls only the cooling system.
OFF:
Heating and cooling systems are off.
EMERG:
This setting only applies to heat pumps with auxiliary heat. The thermostat only
controls the Emergency (Auxiliary) heat, leaving the heat pump’s compressor
locked out. Use this setting only when you suspect the heat pump is out of service or the outdoor conditions may lead to an inefficient operation of the heat pump.
Page 18
Fan Modes
You can manually change the fan mode between AUTO and ON, by pressing the RIGHT TAB.
AUTO:
The fan runs only when the heating, cooling, or emergency systems are on. As described in detail in the Installation section of this manual, for conventional systems, under EQUIPMENT SETTINGS, with FAN ON IN HEAT set to NO, the fan is not controlled by the thermostat, but by the furnace.
ON:
The fan runs continuously.
Page 19
Main Menu
From the Home Screen, pressing the MENU / SELECT button once (if the screen is active) or twice (if it is in the idle mode), the MAIN MENU appears as it is shown on the left.
Using the SCROLL buttons, you can scroll to the desired menu item, as shown in the two screen shots on the left.
Press the MENU / SELECT button to select the desired menu item.
Page 20
Temperature Settings
A SETPOINT is identified by a NAME and specifies heating and cooling target temperatures. Example: If the SETPOINT is set to WAKE, with COOL temperature of 78°F and HEAT temperature
of 70°F, a thermostat operating in AUTO mode will keep your dwelling’s temperature at the
predefined HEAT or COOL temperature. In the summer, the thermostat will COOL your dwelling down to 78°F. In the fall, the thermostat will engage the HEAT mode, heating your dwelling up to 70°F throughout the winter. In the spring, when temperatures rise again, the thermostat will change back to COOL mode. The SETPOINTs HEAT and COOL temperatures can be changed either from the Quick Schedule screen or from the Setpoints screen.
Note: If the schedule of the thermostat has been turned off (see Schedule Type), the thermostat will use the Wake Setpoint by default, and no SETPOINT name will be displayed.
Page 21
Schedule Menu
The SCHEDULE menu provides access to viewing and modifying your current and future schedules (QUICK SCHEDULE), change the SCHEDULE TYPE that your thermostat is following, modify the name and temperature of SETPOINTS, and change the time at which Setpoints are scheduled for (SCHEDULE).
Quick Schedule
The QUICK SCHEDULE screen allows you to quickly modify the temperatures and starting times of the SETPOINTS. You can get into this screen from the Main Menu. Use the MENU / SELECT button to select the starting time or HEAT or COOL temperature that you wish to change, and use the SCROLL buttons to obtain the desired value. Press the LEFT TAB that will show SAVE CHANGES (right tab to CANCEL) and then continue with the NEXT DAY (shown now on the LEFT TAB).
Page 22
Schedule Type
The SCHEDULE TYPE screen allows you to choose among four different weekly schedule types. These are:
5/2 DAYS
Monday – Friday schedules are the same. Saturday & Sunday schedules are the same
OFF
No schedule. The thermostat controls to the target temperature set using the up and down scroll buttons from the home screen.
7 DAYS
Every day of the week has an individual schedule.
5/1/1 DAYS
Monday – Friday schedule is the same. Saturday has an individual schedule, and Sunday has an individual schedule.
By pressing the MENU / SELECT button, while in the SCHEDULE menu you get access to the SCHEDULE TYPE screen. Use the SCROLL buttons to change the weekly schedule type. Press the LEFT TAB to SAVE CHANGES.
Page 23
Setpoints
The SETPOINTS screen shows on the left the list of names of the different SETPOINTS programmed in your thermostat and on the right the corresponding heating (in winter) and cooling (in summer) target temperatures.
To change the HEAT and COOL temperature settings, SCROLL to the SETPOINT you want to change and press the MENU / SELECT button. SCROLL to change the temperature, or press again the MENU / SELECT button to move between the HEAT and COOL settings. As soon as you start changing a temperature, the LEFT TAB will show SAVE CHANGES. Press this TAB if you want to save them or cancel them by pressing the RIGHT TAB (CANCEL).
You can also modify the name of the SETPOINTS, by scrolling to the SETPOINT you want to change and pressing EDIT NAME. You can change one letter at a time by SCROLLING through the alphabet until you get to the desired letter, then pressing MENU / SELECT to move to the next letter of the name. Once done, press SAVE CHANGES.
Note: When SCHEDULE TYPE is OFF, no setpoint name is shown.
Loading...
+ 53 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use