Ener-G+ HEA-21580 Instruction Manual

HEA-21580

MURAL

INFRARED

PATIO HEATER

RADIATEUR À INFRAROUGE

1500 Watts

MURAL

POUR TERRASSE

Please read instructions carefully before assembly

Veuillez lire attentivement les instructions avant l'assemblage

Instruction Manual
Guide d’utilisation

Retain this manual for reference

Conservez ce manuel pour référence

CONTENT

1. Assembly

2. Operation

3. For your safety

4. Cleaning and storage

5. Specifications

6. Grounding instructions

7. Warranty

FRANÇAIS

Please empty the packing box thoroughly, and make sure that there are no missing parts.

MAKE SURE THERE IS NO DAMAGE TO THE UNIT AND POWER CORD.
IF THERE IS ANY DAMAGE OR IF THERE ARE MISSING PARTS, PLEASE CONTACT1-866-967-7333 ext 227.

2. ASSEMBLY

Components

1

Wall mounted: Brick or Concrete

Step 1: Using the wall mount bracket as a template mark the four holes where you plan to install the radiator. Drill four

holes into the wall and hammer the supplied four M6*50 expansion bolts into the wall.

Step 2:
Unscrew the four nuts, spring locks washers and plain washers from the four expansion bolts. Keep them for the next
step.

Step 3:
Fix the mounting bracket over the four expansion bolts.

1

Step 4

Once installed, you can adjust the heater to the desired angle.

Wall mounted (Other surfaces):

Step 1: Using the wall mount bracket as a template mark the four screw holes where you plan to install the radiator.

Step 2: Place the radiator with the mounting bracket on the four marks and tighten four screws (not included).

Step 3

Once installed, you can adjust the heater to the desired angle.

Installation Bracket Instructions:

Step 1

2